Skip to main content
  • Research article
  • Open access
  • Published:

Fungal-assisted algal flocculation: application in wastewater treatment and biofuel production

Abstract

Background

The microalgal-based industries are facing a number of important challenges that in turn affect their economic viability. Arguably the most important of these are associated with the high costs of harvesting and dewatering of the microalgal cells, the costs and sustainability of nutrient supplies and costly methods for large scale oil extraction. Existing harvesting technologies, which can account for up to 50% of the total cost, are not economically feasible because of either requiring too much energy or the addition of chemicals. Fungal-assisted flocculation is currently receiving increased attention because of its high harvesting efficiency. Moreover, some of fungal and microalgal strains are well known for their ability to treat wastewater, generating biomass which represents a renewable and sustainable feedstock for bioenergy production.

Results

We screened 33 fungal strains, isolated from compost, straws and soil for their lipid content and flocculation efficiencies against representatives of microalgae commercially used for biodiesel production, namely the heterotrophic freshwater microalgae Chlorella protothecoides and the marine microalgae Tetraselmis suecica. Lipid levels and composition were analyzed in fungal-algal pellets grown on media containing alternative carbon, nitrogen and phosphorus sources from wheat straw and swine wastewater, respectively. The biomass of fungal-algal pellets grown on swine wastewater was used as feedstock for the production of value-added chemicals, biogas, bio-solids and liquid petrochemicals through pyrolysis. Co-cultivation of microalgae and filamentous fungus increased total biomass production, lipid yield and wastewater bioremediation efficiency.

Conclusion

Fungal-assisted microalgal flocculation shows significant potential for solving the major challenges facing the commercialization of microalgal biotechnology, namely (i) the efficient and cost-effective harvesting of freshwater and seawater algal strains; (ii) enhancement of total oil production and optimization of its composition; (iii) nutrient supply through recovering of the primary nutrients, nitrogen and phosphates and microelements from wastewater. The biomass generated was thermochemically converted into biogas, bio-solids and a range of liquid petrochemicals including straight-chain C12 to C21 alkanes which can be directly used as a glycerine-free component of biodiesel. Pyrolysis represents an efficient alternative strategy for biofuel production from species with tough cell walls such as fungi and fungal-algal pellets.

Background

In spite of substantial efforts worldwide to produce renewable biofuels, significant challenges still need to be overcome before microalgal-based biofuel production becomes cost effective and can impact the world’s supply of transport fuel [1-6]. The major challenges that need to be addressed before the development of a large-scale integrated algal industry include (i) optimization of microalgal harvesting/dewatering technologies; (ii) provision of a sustainable and renewable nutrient supply; (iii) improvement in oil content and composition; and (iv) increase in efficiency and reduction in the cost of lipid extraction.

Harvesting can account for up to 50% of the total cost of biodiesel production and is not economically viable for large-scale microalgal industry because of the significant energy requirements and/or the addition of costly chemicals (for reviews, see [7-15]). The main techniques used for harvesting microalgal cells include centrifugation, filtration, flocculation, gravity sedimentation and flotation [8,9,16-20]. Centrifugation can harvest about 90% of the microalgae; however, this comes with a high energy input cost, especially for a low value product such as biofuel [13]. Floatation is a method in which air or gas bubbles or flocculants attach to the microalgal cells carrying them to the surface [8,21]. Recently, Garg et al. (2014) showed that recovery of the marine microalgae Tetraselmis sp. can be increased up to 97.4% using improved froth flotation performance [22]. Filtration is efficient only for the large multicellular microalgae such as Coelastrum proboscideum and Spirulina platensis, and frequent filter replacement makes this method uneconomical [8,23]. This process is slow, although processing speed can be increased using the addition of flocculants [24]. Flocculation is the process by which algae forms clumps, pellets or pellet-like structures called flocs. Being negatively charged on the surface microalgal cells do not self flocculate, as the negative charge prevents aggregation under normal growth conditions [8,25-27]. Neutralizing and reducing the microalgal surface charge can be achieved by the application of chemical flocculants (inorganic and organic) and biological flocculants or by inducing an electrical impulse to neutralize the surface charge [16]. These methodologies are not universally successful and do not work for all microalgae strains [16,28].

The organisms that have been shown to induce efficient bioflocculation of microalgae are bacteria and fungi [13,29-31]. The gram-positive bacteria Solibacillus silvestris and Bacillus sp. both showed a flocculation efficiency of up to 90% with the marine microalgae Nannochloropsis oceanica [30]. An efficient bioflocculant has been isolated from the autoflocculating Scenedesmus and Chlorella vulgaris (C. vulgaris) microalgae when they were grown in wastewater [29]. Fungal self-pelletization has been observed for numerous filamentous strains and can be explained by coagulative and non-coagulative mechanisms [17,32-35]. The coagulative mechanism involves spore coagulation leading to the developments of aggregates/pellets. Representatives of Aspergillus sp., Basidiomycete sp. and Phanerochaete sp. produce dense spherical aggregates through coagulative mechanism [17,33]. The non-coagulative mechanism suggests that the spores germinate into hyphae, which then will intertwine into pellets. Representatives of Rhizopus sp., Mucor sp. and Penicillium sp. display the non-coagulative mechanism [17,33]. Fungal-assisted microalgal harvesting technology does not require the addition of chemicals or inputs of energy, and a number of microalgal strains have been shown to be efficient [17,33,36-40]. If this technology can be applied to commercially important freshwater and seawater algal species, it can offer a solution to one of the major problems associated with the energy-intensive and costly harvesting processes.

The detailed mechanisms of the fungal-algal interactions are still not clear. It was suggested that the algae have a negative surface charge (−23.7 mV) due to the presence of proton-active carboxylic, phosphoric, phosphodiester, hydroxyl and amine functional groups [17,23]. Fungal hyphae and mycelia contain polysaccharides that have been shown be positively charged (+46.1 mV) and therefore can potentially neutralize the negative charges on the algal surface, enabling attachment to the fungal cell wall.

Natural symbiosis between fungi, microalgae and cyanobacteria, known as lichens, has existed since plants evolved from green algae, more than 400 million years ago; and these lichens are covering 6% of Earth’s land surface [41] (Additional file 1). In this mutually beneficial symbiosis, fungi consume the sugars and nutrients produced by the algae through photosynthesis; in return, the fungus affords protection to the algae by retaining water, serving as a larger capture area for mineral nutrients and, in some cases, provides minerals obtained from the substrate [42]. This suggests that fungal-microalgal pellets can also function as a self-sufficient system which can potentially improve the overall economics of a large-scale integrated microalgal industry.

Lipid production by oleaginous microorganisms is a promising route to produce crude oil material for the production of biodiesel. Microalgal strains have been widely used by researches and biotechnology companies because they are able to accumulate large amounts of neutral lipids (up to 60% of their dry weight). The profiles of their transesterification (TE) products revealed a high content of fatty acids, similar to conventional vegetable oils used for biodiesel production. The application of oleaginous fungi for biodiesel production is, to date, limited in spite of obvious advantages over conventional plant and microalgal resources. Oleaginous fungi can accumulate >20% (w/w) of their dry cell mass in the form of neutral lipids, with a high content of saturated and monounsaturated fatty acids such as palmitic (C16:0), stearic (C18:0) and oleic (C18:1) acids commonly used for biodiesel production. Fungi can be easily grown in bioreactors with rapid growth rates unaffected by light intensity and duration (photoperiod) and are able to utilize a wide range of lignocellulosic waste biomass as renewable carbon sources and wastewater nutrients as sources of nitrogen (N) and phosphorus (P) [9,43,44]. Moreover, pelletization of fungal cells during growth in liquid media makes their harvest much easier and cheaper than the isolation of the microalgal strains (for review, see [17]).

Unlike plant and most of microalgal cells, fungal cells contain tough cell walls with a complex structure composed of extensively cross-linked chitin, glucans and other polymers [17,45]. Some microalgal strains, such as Nannochloropsis occulata, also have very tough cell walls which require special pretreatment prior to extraction of intracellular lipid [46]. This makes the extraction procedure from these species challenging.

Pyrolysis has recently attracted increased attention due to a number of advantages, including relatively mild operational conditions and the resultant production of several valuable products: pyrolysis gas, bio-oil and bio-solids (bio-char and mineral ash). In most cases, bio-oil is the main target product of pyrolysis because it can be further processed via catalytic hydrodeoxygenation (CHDO) and/or hydrocracking to liquid hydrocarbon products similar to petroleum-derived fuels. So far, most of the pyrolysis research has concentrated on lignocellulosic materials such as wood, straws and stalks [47,48]. The thermal conversion of algae into bio-oil has also been intensively studied over recent years because of their ability to produce substantial biomass with high oil content [49-52]. Recently, we have reported pioneering studies on the pyrolysis of aquatic plants and microalgal representatives, which showed great potential as feedstock for the production of bio-oil and bio-char [39,53-56]. Some of these species were used for the efficient bioremediation of animal and mining wastewaters and represent an attractive, ecologically friendly and potentially cost-effective solution for the conversion of waste biomass into sustainable bioenergy [39,53,55]. In spite of the impressive biomass production rate, the high content of carbohydrates, proteins and lipid level and fatty acid composition, to our knowledge, there is no report on pyrolysis of oleaginous fungi.

In this work, we screened 33 fungal strains isolated from compost, straws and soil, a rich source of fungi for lipid concentrations and flocculation efficiencies. For the first time: (i) flocculation efficiency was tested against two commercially important microalgal strains, the heterotrophic freshwater algae, Chlorella protothecoides (C. protothecoides), and the marine species, Tetraselmis suecica (T. suecica), widely used for biodiesel production [57-61]; (ii) lipid level and fatty acid composition were analyzed in fungal-algal pellets grown on alternative carbon sources; (iii) fungal-algal pellets grown on swine wastewater were used as feedstock for production of value-added products, biogas, bio-solids and liquid petrochemicals through pyrolysis. Our research showed that co-pelletization of fungal and microalgal cells can not only increase the total lipid production but also tailor its composition, via combinations of different microalgal and fungal strains. Co-cultivation of algae and filamentous fungal cells also increased the recovery of N/P nutrients from wastewater.

Results and discussion

Phenotypic and biochemical aspects of fungal-assisted algae flocculation

Screening for oleaginous fungal strains

A total of 33 fungal strains, isolated from compost, straws and soil, were screened for intracellular oil accumulation (Additional files 2 and 3). Screening was designed on the assumption that oil accumulated in fungal cells grown on enrichment broth (EB) containing 100 g/L of glucose will be utilized for growth on carbon-free media (CFM). As a result, strains with higher levels of accumulated oil will grow faster on CFM plates [62]. Additional file 3 compares the growth rates of analyzed fungal strains after 12 and 24 h of growth on CFM. Based on growth rates, 15 strains were selected for lipid extraction/quantification and algal flocculation rate analysis.

Concentration of lipids in the selected 15 fungal strains after growth in potato dextrose broth (PDB) containing 20 g/L of glucose were found to be between 4.3% and 14.7% of dry weight (DW). Two strains, #8 [Aspergillus fumigatus (A. fumigatus)] and #14 [Mucor circinelloides (M. circinelloides)], showed the highest lipid content with levels of 9.9% and 14.7% DW, respectively (Figure 1A). M. circinelloides strains have previously been shown to have an oil content up to 23% DW [35,44]; however, the strain used in this study showed a modest oil content, close to the lipid concentration found in M. circinelloides strain by Xia et al. (2011 and 2014) [35,44]. The A. fumigatus and M. circinelloides strains showed visible oil bodies when stained with Nile red and Sudan black (Figure 1B). The 15 selected fungal strains showed different rates of self-pelletization, producing loose and dense spherical aggregates (Additional file 4A). Pellet sizes could be changed by altering the speed of rotation used for growth in liquid broth (Additional file 4B).

Figure 1
figure 1

Lipid production in fungal isolates. (A) The lipid concentrations in cultured fungal strains; (B) microscopic analysis of oil bodies accumulation in A. fumigatus (a, c) and M. circinelloides (b, d) using Nile red (a, b) and Sudan black (c, d).

Flocculation efficiency of microalgal cells by fungal cells

As a first screen for microalgal flocculation efficiency, pelletized fungal cultures were mixed with medium cell density cultures of C. protothecoides (grown mixotrophically, 1.5 × 107 cells/mL) and T. suecica (grown autotrophically, 6.5 × 106 cells/mL) in 12-well microtitre plates (Figure 2A). Efficiency of microalgal harvesting was measured by reduction in optical densities, cell numbers and chlorophyll concentrations of uncaptured algal cells after 24 h of co-cultivation with fungal pellets (Figure 2B). Based on the high flocculation efficiency of both microalgal strains, along with the production of dense spherical pellets, A. fumigatus (#8) was selected for a further round of flocculation tests. Efficient flocculation of the other microalgal representative have previously been shown for a number of filamentous fungal strains, including representatives of Aspergilium sp., A. fumigatus, A. niger, A. oryze and A. nomius [32,33,36-40].

Figure 2
figure 2

Flocculation of C. protothecoides and T. suecica by 15 fungal strains. (A) 12-well microtitre plate experiment: fungal pellets were mixed with suspensions of C. protothecoides (left wells) and T. suecica (right wells) for 24 h. Controls: microalgal suspensions grown without fungi (top wells); fungal cultures grown alone (middle wells). (B) Flocculation efficiency measured by reduction in optical densities, cell numbers and chlorophyll concentrations of uncaptured algal cells after 24 h of co-cultivation.

For the larger scale flocculation experiments, A. fumigatus pellets produced on PDB (A. fumigatus/PDB) were mixed with high cell density cultures of C. protothecoides (1 to 3 × 109 cells/mL grown mixotrophically) and T. suecica (7 to 12 × 108 cells/mL, grown autotrophically). A. fumigatus showed up to 90% flocculation after the first 24 h of co-cultivation with no obvious differences in flocculation efficiency between freshwater and seawater microalgal species (Figures 3 and 4). The concentrations of uncaptured microalgal cells were slightly increased after 24 h (shown by a decrease in flocculation efficiency), which can be explained by their release from the fungal filaments and/or by independent growth of uncaptured microalgal cells in the media [17,32,36,39]. Additional file 5 shows that within fungal-algal pellets, microalgal cells do not just get trapped within fungal filaments but get attached to them. Examination of T. suecica cells showed the absence of visible algal cell walls after co-culturing with fungal strains. This can be explained by the secretion of hydrolytic enzymes by fungal cells in the presence of the microalgal cells (Additional file 5).

Figure 3
figure 3

Flocculation of microalgal strains by A. fumigatus . (A) Flocculation of C. protothecoides: A. fumigatus culture (left); mixotrophically grown C. protothecoides culture (middle); A. fumigatus/C. protothecoides pellets (right). (B) Flocculation of T. suecica: autotrophically grown T. suecica culture (left); A. fumigatus/T. suecica pellets (right). (C) T. suecica culture mixed with A. fumigatus pellets, time = 0 (left); 24 h later (right). (D, E) A. fumugatus pellets grown PDB (left) and 1% TWS (right). (F) Flocculation of T. suecica: A. fumigatus/PDB-T. suecica pellets (left); original T. suecica culture (middle); A. fumigatus/TWS-T. suecica pellets (right).

Figure 4
figure 4

Flocculation efficiency of algal strains by A. fumigatus. Flocculation of C. protothecoides by A. fumigatus/PDB (1) and A. fumigatus/ TWS pellets (3); flocculation of T. suecica by A. fumigatus/PDB pellets (2) and A. fumigatus/ TWS pellets (4).

To test the efficiency of microalgal flocculation by A. fumigatus grown on alternative carbon sources, fungal spores were grown on carbon-free broth containing 1% acid-treated wheat straw [TWS (A. fumigatus/TWS)]. A. fumigatus/TWS pellets showed no differences in size compared to A. fumigatus pellets grown on PDB media (A. fumigatus/PDB) (Figure 3). In order to assess the potential anti-algal effect of chemicals produced after digestion of TWS by A. fumigatus, microalgal cells were grown in the presence of 5% and 20% of media collected 72 h after incubation of A. fumigatus with TWS. Additional file 6 shows that 20% of added media led to the severe suppression of microalgal growth. To avoid toxic effect, A. fumigatus/TWS pellets were washed before mixing with microalgal cultures. The A. fumigatus/TWS pellets showed slightly lower flocculation rates than A. fumigatus/PDB pellets (Figure 4). This can be explained by (i) the effect of residual amount of toxic chemicals in the growth media [63] and (ii) microalgal cell wall digestion by the cocktails of hydrolytic enzymes secreted from A. fumigatus in the presence of TWS. No significant increase in the numbers of uncaptured microalgal cells was detected in the media after 24 h of co-cultivation.

Lipid production in fungal-microalgal pellets

Mono-cultured A. fumigatus/PDB pellets before mixing with microalgal cultures showed lipid content of 10% of its DW biomass and a lipid yield of 71 mg/L (time 0, Table 1). Not surprisingly, A. fumigatus/TWS pellets showed significantly lower lipid content, 2.8% of DW with a lipid yield of 16 mg/L (time 0). Lipid concentration in mono-cultured T. suecica (7 to 12 × 108 cells/mL) before mixing with A. fumigatus pellets was 15% of its DW with a lipid yield of 86 mg/L (time 0). Mono-cultured C. protothecoides (1 to 3 × 109 cells/mL) grown under mixotrophic conditions showed a lipid content of 26% of its DW and a lipid yield of 172 mg/L (time 0). For flocculation assessment experiments, fungal pellets were mixed with C. protothecoides or T. suecica cultures and the mixtures were then shaken at 150 rpm for 48 h.

Table 1 Biomass and lipid concentrations in A. fumigatus and microalgal strains grown in mono-cultures and co-cultures

Lipid production in the fungal-microalgal pellets showed complex profiles reflecting at least three main factors: biomass production and lipid concentrations in fungal and microalgal cells before and during co-cultivation and the efficiencies of bioflocculation. After 48 h of co-culture of A. fumigatus/PDB with oleaginous C. protothecoides, lipid concentration in pellets was found lower than in mono-cultured microalgae but higher than in mono-cultured A. fumigatus, suggesting that the microalgal strain was the main contributors to the total content of lipids. The total lipid yields (mg/L) in these pellets were found to be higher than the additive lipid content of mono-cultured C. protothecoides and A. fumigatus (Table 1). In A. fumigatus/PDB-T. suecica pellets, lipid concentration and yield were not very different from mono-cultured T. suecica and A. fumigatus. These lipid yields correlated with generated biomasses of the A. fumigatus/PDB-microalgal pellets. Lipid concentrations of A. fumigatus/TWS pellets with C. protothecoides and T. suecica were found to be lower than in mono-cultured microalgae and significantly higher than in mono-cultured A. fumigatus/TWS suggesting that microalgae were essential contributors to the total level of lipids in these algal-fungal pellets. Lipid yields (mg/L) in all pellets were also found to be higher than in mono-cultured algal and fungal strains and correlated with the amount of generated biomass.

The synergistic effects of co-cultivation of A. niger, A. fumigatus, A. oryzae and C. echinulata, with microalgal representatives on biomass production and lipid yields, have also been reported by [32,36,38,39]. Enhancement of fungal biomass can be explained by utilization of the microalgal cell wall carbohydrates as carbon source by fungal cells. Cellulase activity was shown to be induced upon co-cultivation of C. echinulata with C. vulgaris [36]. This activity was absent in the mono-cultured C. echinulata. The composition of microalgal cell walls vary between different strains; however, cellulose is reported as the main structural component of the cell wall for some [64-66]. Treatment with external cellulase resulted in a significant increase in sugar concentration in the culture of C. vulgaris [65-67]. In our experiments, the potential A. fumigatus cellulase activity was correlated with the observation of cell wall-free microalgal protoplasts found either attached to the fungal cells or remaining uncaptured in cultivation media. The saprophytic behavior of the fungal component of natural lichens secreting phenol oxidases, peroxidases and cellulases benefits their growth when algal photosynthesis is limited [68].

Fatty acid composition of fungal-microalgal pellets

Fatty acids in oleaginous fungi are represented mainly by palmitate, C16:0, stearate, C18:0, oleate, C18:1, and linoleate, C18:2 [35,44,62,69-71]. Fatty acid composition (measured by composition of fatty acid methyl esters (FAMEs)) of A. fumigatus/PDB and A. fumigatus/TWS pellets with C. protothecoides and T. suecica is shown in Figure 5. Fatty acid composition of A. fumigatus/PDB is dominated by palmitate, C16:0 (ca 18%), and linoleate, C18:2 (ca 30%) (Figure 5). A. fumigatus/TWS pellets showed higher concentration of palmitoleate, 16:1, and linolenate, 18:3, and lower concentration of linoleate, C18:2, than A. fumigatus/PDB, C. protothecoides and T. suecica cells which showed almost opposite profiles of fatty acid compositions: T. suecica was significantly higher in palmitate, C16:0, and palmitoleate, C16:1, while C. protothecoides contained a higher proportion of stearate, oleate and linoleate (C18:0, C18:1 and C18:2, respectively). Similar compositions of FAMEs in C. protothecoides and T. suecica have been reported [51,61,72]. Fatty acid composition of the fungal-algal pellets reflected the levels and compositions in both fungal and algal strains and the efficiencies of their co-pelletization. Microalgae were the main contributors of the linolenate, C18:3. A. fumigatus was also a main contributor of C16:0 and C16:1 for C. protothecoides and C18:0 and C18:2 for T. suecica. Co-contributions of fatty acids from fungal strains and microalgal strains were previously shown [32,33,36,39] .

Figure 5
figure 5

Fatty acid composition of A. fumigatus, C. protothecoides, T. suecica and fungal-algal pellets. 1) A. fumigatus/TWS pellets; 2) A. fumigatus/PDB pellets; 3) algal strains; 4) A. fumigatus/TWS-algal pellets; 5) A. fumigatus/PDB-algal pellets.

Swine wastewater as an alternative source of nutrients for fungal-microalgal pellets

Both microalgal and fungal cells have been extensively used as efficient bio-remediating agents for wastewater treatment [7,9,10,25,43,73-76]. We assessed the ability of A. fumigatus/C. protothecoides (Af/Cp) and A. fumigatus/T. suecica pellets (Af/Ts) to grow and uptake nutrients (NH4 +-N and PO4 −3-P) from diluted anaerobically digested swine manure wastewater (ASW) prepared from swine lagoon wastewaters (Table 2, Figure 6). For these experiments, the swine wastewater was diluted to 10% and 25% with sterile tap water for Af/Cp and seawater for Af/Ts. After 48 h of Af/Cp incubation in 25%, wastewater concentrations of NH4 +-N was reduced from 164.3 to 43.2 mg/L (73.9% uptake) and the concentration of PO4 −3-P was reduced from 38.7 to 17.2 mg/L (55.6% uptake). This removal efficiency was higher than the efficiency of NH4 +-N, and PO4 −3-P removal was achieved separately by C. protothecoides (36% and 25%, respectively) and by A. fumigatus (46% and 20%, respectively, Table 2). In 10% ASW, both nutrients were practically removed after 48 h of incubation with Af/Cp (93% removal for NH4 +-N and 87% removal of PO4 −3-P). Growing in different dilutions of ASW in seawater, A. fumigatus showed no obvious differences in nutritional uptake compared to ASW diluted with tap water. In spite of the fact that T. suecica alone showed lower rates of uptake of NH4 +-N and PO4 −3-P than C. protothecoides, incubation of Af/Ts pellets in 10% and 25% ASW diluted in seawater showed similar uptake rates to Af/Cp. Efficient wastewater treatment by Aspergillus sp./C. vulgaris pellets was shown by Zhou et al. (2012, 2013) [37,38]. Wastewater with much lower concentrations of NH4 + and similar concentration of PO4 3+ (51.2 mg/L for both) was used in this work. Nutrient uptake by Af/Cp and Af/Tc pellets led to 1.7- and 1.6-fold increase in their biomass production after 48 h of treatment (Figure 7). The lipid yield was increased by 1.3-fold (for both pellets), which associated with slightly reduced lipid concentrations of 18% and 15% DW for Af/Cp and Af/Tc, respectively.

Table 2 Concentrations of nutrients in diluted swine wastewater before and after treatment with C. protothecoides, T. suecica and their pellets with A. fumigatus
Figure 6
figure 6

Application of A. fumigatus / C. protothecoides pellets for swine wastewater treatment. (A, B) A. fumigatus/C. protothecoides pellets with 25% wastewater: t = 0 (left); 48 h later (right); (C) samples of 25% wastewater before (1) and after treatment with C. protothecoides (2), A. fumigatus (3) and A. fumigatus/C. protothecoides (4).

Figure 7
figure 7

Biomass and lipid production. Biomass and lipid production of A. fumigatus/C. protothecoides and A. fumigatus/T. suecica pellets grown in 25% swine wastewater. Af/Cp: A. fumigatus/C. protothecoides pellets; Af/Ts: A. fumigatus/T. suecica pellets.

Pyrolysis of C. protothecoides, A. fumigatus and A. fumigatus/C. protothecoides pellets

Thermogravimetric analysis of C. protothecoides, A. fumigatus and A. fumigatus/C. protothecoides pellets

The biomass of C. protothecoides, A. fumigatus and A. fumigatus/C. protothecoides pellets collected after bioremediation of wastewater were subjected to thermogravimetric (TGA) and derivative thermogravimetric (DTG) analyses in order to determine their thermal stability/behavior pattern over the range of temperatures of 25°C to 950°C. TGA/DTG analysis provides a means for conducting proximate analysis of the samples as well as the preliminary mechanistic studies of the biomass pyrolysis process. Proximate analysis of the dry algal biomass samples, C. protothecoides, A. fumigatus and A. fumigatus/C. protothecoides, is shown in Table 3. It was observed that the volatile matter (both primary and secondary) content of all samples tested was similar; however, the amount of fixed carbon and ash was found to be lower in the fungal sample.

Table 3 Proximate analysis of the C. protothecoides, A. fumigatus/C. protothecoides and A. fumigatus samples determined by TGA method

Figure 8A shows the results of TGA/DTG analyses of all three samples in inert He atmosphere within the temperature range of 25°C to 950°C and a heating rate of 20°C/min. The TGA profiles of all samples show a significant weight loss in the temperature range of 200°C to 400°C. This was followed by an intermediate region (400°C to 600°C) and the rather slow rate of weight loss at temperatures above 600°C. The DTG curves of the tested samples in He atmosphere show certain similarities and also some distinct differences. Peaks in the low temperature region at about 60°C and 200°C can be attributed to dehydration processes involving water molecules adsorbed on the sample surfaces and those bound within the inner cells of the algae samples, respectively. It is noteworthy that A. fumigatus shows a very weak peak at 200°C. The majority of volatile compounds from all samples are released in the temperature range of 240°C to 400°C where major thermal degradation processes occur. During this stage, bio-polymers are thermally decomposed with less stable molecules breaking apart first. All three samples showed a weak peak at about 450°C. A comparison of TGA/DTG profiles of algal samples with that of terrestrial biomass such as poplar [77] saw dust [78] shows dissimilarities in that the intensive peak in algal DTG profile was shifted by about 50°C to a lower temperature range compared to the intensive peak in plant biomass DTG.

Figure 8
figure 8

Thermogravimetric analysis of biomasses. (A). TGA/DTG analysis of algae biomass samples in a He atmosphere. Heating rate: 20°C/min. a) C. protothecoides, b) A. fumigatus/C. protothecoides; c) A. fumigatus. (B) TG/DTG analysis of algae biomass samples in air atmosphere. Heating rate: 20°C/min. a) C. protothecoides, b) A. fumigatus/C. protothecoides.

The results of TGA/DTG analysis are consistent with the complex structure of algal biomass, comprising several classes of natural compounds (proteins, lipids, carbohydrates), characterized by a distinct thermal stability signature. The peaks in the low-temperature range of 200°C to 220°C (medium intensity for C. protothecoides and A. fumigatus/C. protothecoides and weak for and A. fumigatus) can be attributed to decomposition and evaporation of oily compounds and other thermally unstable functional groups of various natural compounds. Similar observations were reported by other authors who pointed to degradation of oily compounds within the temperature range of 170°C to 230°C [79]. The intensive double peak in the DTG curve of C. protothecoides and A. fumigatus/C. protothecoides at 280°C to 350°C is in the same temperature range as the degradation temperature of plant hemicellulose (e.g. [77,78]. A cellulose peak typically manifests itself at the temperature range of 350°C to 370°C [77,78]. The reported results of DTG analysis of macroalgal species confirmed that hemicellulose degrades faster than cellulose with the latter breaking in the 250°C to 407°C temperature range [78]. Based on the above data, the double peak in DTG of C. protothecoides could be attributed to the hemicellulose-cellulose pair. In the DTG profile of A. fumigatus/C. protothecoides, the higher temperature peak (approximately 350°C) was more intense than that in the DTG of C. protothecoides, which may imply that the cellulose content of these samples was lower compared to mono-cultured algae.

The presence of raw protein in the tested samples could be obscured by an intensive hemicellulose peak. It was reported that the DTG curve of marine microalgae exhibited an intensive peak at 285°C (at a heating rate of 20°C/min), which was assigned to protein [80]. The relatively low thermal stability of proteins was also emphasized by other authors; for example, according to [81], the thermal stability of proteins is limited to about 200°C. The weak peak at about 460°C in DTG of C. protothecoides and A. fumigatus/C. protothecoides occurs where thermal degradation of thermally stable bio-polymers, such as lignin, typically takes place [77,82]. The thermal degradation of lignin in macroalgae [83] and plants [77,82] was also reported to occur at about the same temperature range. The occurrence of this peak may indicate the presence of lignin-like compounds in C. protothecoides and A. fumigatus/C. protothecoides (in DTG of A. fumigatus, this peak is very weak but still visible).

Figure 8B depicts the results of TGA/DTG analyses in an oxidative atmosphere (air) in the same temperature range of 25°C to 950°C and a heating rate of 20°C/min. The DTG profile of A. fumigatus is fairly similar to that of A. fumigatus/C. protothecoides (not shown). It is evident that the DTG profiles of thermal degradation of the samples in air were markedly dissimilar to those obtained in an inert (He) atmosphere. In particular, there are two distinct areas of a significant weight loss in the oxidizing atmosphere, as opposed to one area in inert atmosphere; these two areas are separated by the temperature gap of more than 300°C. The low-temperature peak at about 200°C and an intermediate-temperature peak at 280°C to 350°C are present in the DTG profiles in He. These peaks remain almost unchanged in the corresponding DTG profiles in air. This observation indicates that the oxidizing atmosphere only slightly affects the thermal degradation of the samples in a low-to-intermediate temperature range (that is, up to 400°C). The relatively weak peak at 420°C can be assigned to the oxidative thermal degradation of lignin-like compounds. The intensive peaks in the high temperature region of 620°C to 640°C (which are absent in the DTG curves in He) result from the combustion of bio-chars. A similar two-peak pattern were previously reported by [78,84] with regard to TGA/DTG analysis of straw, waste wood and duckweed, respectively, although in these cases the high temperature peak was observed at a somewhat lower range of temperatures of 460°C, 440°C, and 560°C, respectively (at the same heating rate of 20°C/min).

Mechanistically, the above experimental observations can be explained in terms of two concurrent pathways: (a) initial pyrolysis of biomass to volatile matter and char followed by their combustion and (b) direct combustion of biomass to oxidation products (CO2, H2O). The presence of the same peaks in the low- and intermediate-temperature range in the DTG profiles of biomass samples in both inert and oxidizing atmosphere points to the prevalence of pathway a compared to b. A similar mechanism has been suggested for the oxidative degradation of duckweed [54,56]. More detailed discussion of the mechanism of oxidative pyrolysis of biomass can be found in [84].

Distribution of biomass pyrolysis products

Figure 9 shows the distribution of pyrolysis products (biogas, bio-oil, bio-char) for all three biomass samples tested at the pyrolysis temperature of 500°C. The results obtained indicate that within the experimental margin of error, the bio-oil yields for all samples were similar. Pyrolysis of the samples generate on average 6% to 9% gas, 30% to 38% solid and 50% to 55% bio-oil fractions. No significant differences can be observed in the proportion of pyrolytic products between C. protothecoides, A. fumigatus and A. fumigatus/C. protothecoides. The production of the main pyrolytic products from C. protothecoides correlates well with production of bio-oil, biogas and bio-char from microalgal samples reported earlier [52]

Figure 9
figure 9

Distribution of pyrolysis products. 1) C. protothecoides, 2) A. fumigatus/C. protothecoides; 3) A. fumigatus.

The composition of the pyrolysis gas is shown in Table 4. The major gaseous products of algal biomass pyrolysis were CO2, CO and CH4 along with small amounts of H2 and C2+ hydrocarbons. CO2 is by far the major component of the pyrolysis gas produced from all samples, amounting to about 70 to 85 vol.% of the gas. It can be seen from the Table 4 that pyrolysis of C. protothecoides produces a higher percentage of H2 and a correspondingly lower percentage of CO, compared with other samples. This could be attributed to the water-gas shift reaction taking place in the presence of the catalytically active mineral components of the algae. C. protothecoides shows the highest content of gaseous hydrocarbons (C1 to C4) and the lowest CO2 content among all the samples tested.

Table 4 Composition of gaseous products pyrolysis in vol. %

Analysis of the bio-oil products of pyrolysis

The bio-oil produced by pyrolysis of the tested microalgal biomass represented a dark brown-to-black viscous liquid with a pungent odor. Similar observations have been reported by [82]. GC chromatograms of dichloromethane-dissolved bio-oil samples produced from C. protothecoides, A. fumigatus and A. fumigatus/C. protothecoides and retention times of the peaks of the individual components of bio-oils are shown in Figure 10. The peak assignments and the list of molecules identified by the search-match feature of the MS software are summarized in Table 5. Only those peaks with a high degree of certainty, over 90%, are included in this list. The bio-oils produced from C. protothecoides, A. fumigatus and A. fumigatus/C. protothecoides contained a mixture of low-to-intermediate molecular weight compounds representing the derivatives of aromatic and non-aromatic heterocyclic, oxygenated and N-containing compounds such as phenols, pyrroles, indolizines, furanes, indoles, piperidines and others. Many of these compounds were previously identified in pyrolysis products of other micro- and macro-algae representatives, for example, L. minor, azolla and others [39,53-56]. The analyzed bio-oil samples showed the presence of long-chain saturated alkanes (paraffins) such as dodecane, tridecane, tetradecane, pentadecane, hexadecane, heptadecane and octadecane along with mono-unsaturated alkanes and other alkane derivatives sizing from C14 to C20, for example, 8-heptadecene, phytol and others. It should be noted that similar long-chain lipid-derived alkanes were found in the pyrolysis products of some algal strains [85,86]. Compounds like 5-methyl-2-furan methanol, 3,4,5-trimethyl-2-cyclopentene-1-one and other oxygenates could be of a carbohydrate origin. Long chain acids and esters (oleic acid, linolenic acid methyl ester, 11,13-dimethyl-1,2-tetradecen-1-ol-acetate) can be attributed to the lipid content of the biomass samples.

Figure 10
figure 10

GC spectra of dichloromethane-dissolved bio-oil samples produced from: (A) C. protothecoides, (B) A. fumigatus / C. protothecoides pellets; (C) A. fumigatus.

Table 5 GC analysis of bio-oil products of C. protothecoides, A. fumigatus/C. protothecoides and A. fumigatus

Phytol (3,7,11,15-tetramethyl-2-hexadecen-1-ol), the product of the degradation of chlorophyll, represents the most abundant pyrolysis product in C. protothecoides and A. fumigatus/C. protothecoides. Phytol is a commercially important product used in the manufacturing of synthetic forms of vitamin E [87] and vitamin K1 [88], as well as in the production of cosmetics, fragrances, shampoos, soaps, detergents and household cleaners [89]. Because of the absence of chlorophyll molecules, phytol is not present in the bio-oil produced from A. fumigatus. Another difference between C. protothecoides and A. fumigatus bio-oils is that the latter has a relatively higher content of straight chain hydrocarbons and fewer nitrogen-containing compounds.

Of particular practical importance is the conversion of bio-oil to petroleum-equivalent transportation fuels. Long-chain saturated alkanes of diesel range, such as C13 to C17 paraffins found in bio-oils, can be directly added to commercial diesel fuel; for reviews, see [7-9,13-15,76,90]. Since the physical properties of phytol and its fuel characteristics (for example, density, cetane number and heat of combustion) are close to that of diesel fuel, it is currently being investigated by the US Argonne National Laboratory researchers as a potential drop-in biofuel (http://www.transportation.anl.gov/engines/multi_dim_model_biofuels.html). Most of the oxygenated products identified in the pyrolysis oils can potentially be converted into renewable (or ‘green’) gasoline and diesel fuels using existing and emerging techniques, such as catalytic hydrodeoxygenation (CHDO) and hydrotreatment. In the CHDO process, the oxygenated compounds of bio-oils at moderate temperatures (350°C to 400°C) in the presence of catalysts (typically alumina, silica or carbon-supported Ru, Pd, Ni and Co) are transformed into compounds with low-oxygen content that can be injected in the specific points of a refinery chain. N- and S-containing compounds (that are poisons for many industrial catalysts) present in the bio-oils could be dealt with conventional hydrodesulfurization and hydrodenitrification processes that are used at modern refineries.

In a recent paper [49], the authors described hydroprocessing of microalgae-derived bio-oil over HZSM-5 catalyst at 400°C to 500°C under 4.35 MPa pressure of hydrogen. It was found that hydrotreatment greatly reduced the heteroatom (O, S, N) content of the bio-oil. For example, the sulfur content was reduced to less than 0.1 wt.%, and the O/C ratio was reduced by one order of magnitude. Catalytic hydroprocessing of the bio-oil resulted in paraffinic oil, 95% of which consisted of carbon and hydrogen, which made it useful as a feedstock for production of liquid transportation fuels. This study demonstrated the opportunities to engineer the composition of the products obtained from algal bio-oil.

Analysis of bio-solids

Algal biomass is a potential resource for the production of value-added bio-solids such as bio-chars and inorganic ashes (the latter is produced by combustion of either bio-char or raw algae biomass). Plant-derived bio-char has been known for centuries as a soil-amending agent that can greatly enhance crop growth by improving moisture retention and nutrient holding capacity of soils. Bio-char has also been used as a precursor for the production of activated carbons (AC) and other carbonaceous products [91]. Due to availability, chemical inertness (for example, resistance to sulfur, phosphorus and nitrogenous compounds) and low cost AC are widely used as adsorbents and catalyst supports; and in some cases, they are utilized directly as catalysts. For example, we have previously reported that bio-char exhibited appreciable catalytic activity in biogas reforming with the production of syngas [56].

Additional file 7 shows the photographs and SEM images of bio-char and ash obtained from the tested samples. Based on the TGA/DTG analyses of biomass samples (see Table 3), C. protothecoides showed a higher content of fixed carbon and ash compared to other samples. In contrast, A. fumigatus showed lowest yields of bio-char and ash. The inorganic ash content of C. protothecoides (4.1 wt.%) exceeds that of plant biomass (typically, 1 to 2 wt.%) [51,52]. C. protothecoides ash presents a white amorphous powder (Additional file 7C). SEM image of C. protothecoides ash (Additional file 7D) shows the presence of one to three micron-size particles with some larger particles scattered over the surface.

Additional file 8 shows the data on energy-dispersive spectroscopic (EDS) analysis of the ash and bio-char products of pyrolysis of all biomass species tested. It can be seen that phosphorus is the major component of C. protothecoides ash. Phosphorus is also present in the bio-chars produced from A. fumigatus/C. protothecoides and A. fumigatus. C. protothecoides ash also contains K, Ca, Mg and small amounts of Al, Fe and other elements, which points to the significant salt uptake capacity of C. protothecoides. Bio-chars produced from A. fumigatus/C. protothecoides and A. fumigatus samples (besides the main component - carbon) contain K, N, P and an appreciable amount of sulfur.

It should be noted that the presence of inorganic compounds in the algal biomass in relatively large quantities may provide a certain catalytic effect on the thermal degradation processes (both in inert and oxidizing atmosphere), thus reducing the pyrolysis temperature. It has been reported, for example, that decomposition of cellulose is catalyzed by inorganic compounds present in biomass [92].

Microalgal/fungal biomass conversion to bio-oil via extraction and pyrolysis technologies

In our study, we analyzed two technological approaches to recover bio-oil from algae, fungi and fungal-algal pellets: (i) conventional extraction with organic solvents which gave 10% to 26% of TAG-containing neutral lipids which can be converted into biofuel using TE technology and (ii) pyrolysis, which produced about 50% of DW as bio-oil which can be further converted into petrochemicals and liquid fuels using CHDO and/or hydrocracking techniques. The extraction processes, in general, are very energy intensive and costly since they involve expensive solvents and significant consumption of electricity. In addition, many extraction techniques require highly concentrated substrates (which sharply increases energy consumption). Among other challenges facing the extraction processes is the presence of large amounts of moisture (which can participate in side hydrolysis reactions) and undesirable components such as chlorophyll and non-transesterifiable lipids. On the positive side, once extracted, the oil can be quantitatively transformed into biodiesel via commercially mature TE technology with the yields in excess of 98% (although, the use of algal oil in this process is a relatively new area) [93].

Thermochemical pathways for conversion of microalgae and fungi to biofuels present a viable alternative to extraction technology. The options primarily include: (i) pyrolysis, (ii) gasification coupled with Fischer-Tropsch synthesis, and (iii) hydrothermal liquefaction. The detailed overview of these technological approaches to algae-based biofuel production was recently published by Muradov (2013, 2014) [94,95]. The pyrolysis of microalgae and fungi into biofuels could benefit from reduced costs associated with the elimination of a number of steps, such as product extraction and pre- and post-processing. An additional advantage of the thermochemical approach stems from the fact that it is amenable to processing of a broad and diverse range of microalgal and fungal strains, even ones with tough cell walls, which could substantially expand the feedstock supply.

The pyrolysis route, however, is facing several challenges of technical and economic nature. The hydrotreatment processes require substantial amounts of hydrogen and the use of expensive catalysts, which may add to the cost of the final product. In most cases, algal and fungal feedstocks have very high moisture content, which might require an energy-intensive upstream dehydration step for the process to operate efficiently. The presence of phosphorus, nitrogenous and sulfurous compounds in the bio-oil could be detrimental to conventional hydrogenation or hydrocracking catalysts. Finally, the significant fraction of bio-oil could be lost during hydrotreatment processes due to undesirable side reactions. Thus, in order to efficiently and cost-effectively process algae and fungi to liquid biofuels via pyrolysis, it would be necessary to optimize the process on several levels, including the purification and stabilization of oil, the improvement of the catalysts tolerance toward the contaminants and the enhancement in the selectivity of the hydrotreatment processes.

Based solely on algae/fungi-to-biofuel yield criterion, the feasibility of biomass conversion to liquid biofuels via extraction-TE versus pyrolysis-CHDO routes will be determined (among other factors) by its lipid content. In our study, we have not optimized conditions for high lipid production in C. protothecoides. Other studies demonstrated that the crude lipid content of C. protothecoides grown under heterotrophic conditions could reach up to 55% of lipid/DW [52]. The same work also showed that C. protothecoides cells grown under heterotrophic conditions produced 3.4 times more pyrolysis bio-oil than when grown photoautotrophically. Oleaginous fungi, such as M. circinelloides with lipid concentration up to 25% of DW, can be used for microalgal flocculation contributing to total lipid production. Detailed techno-economic evaluation of both approaches would be necessary to make a final determination of their economic feasibility and commercial viability.

The described technology of microalgal flocculation by fungal cells is still primarily based only at the lab scale. Further, extensive techno-economic analysis is now required to make this technology economically feasible at a larger scale. Key areas of this research include the following: (i) the application of biologically safe fungal strains and ecotoxicological studies together with risk assessment of the technology; (ii) assessment of self-pelletization and co-pelletization efficiencies; (iii) reduction of the cost of growth nutrients through the application of alternative sources of carbon, nitrogen and phosphorus; (iv) establishment of efficient and cheap downstream processing technologies which include oil extraction from fungal/fungal-algal cells and their conversion to fuels.

Conclusions

The described fungal-assisted microalgal flocculation shows a potential to solve a number of key challenges that algal biotechnology is facing, in particular:

  1. (i)

    Efficient harvest of freshwater and seawater microalgae. A. fumigatus showed efficient harvest of C. protothecoides and T. suecica strains widely used by research groups and commercial companies for biodiesel and value chemical production.

  2. (ii)

    Enhancement of oil production and optimization of its composition. Fungal-algal co-pelletization showed a synergistic effect on total biomass and lipid production. The composition of fatty acids can be tailored and optimized through co-cultivating different algae and fungi without the need for genetic modification.

  3. (iii)

    Energy-efficient and potentially cost-effective oil extraction from microalgal cells. Cell disruption is an important step in biofuel production since microalgal cell walls are generally thick and consist of multiple layers. Generation of cell wall-free algal protoplasts after co-cultivation with fungal cells can significantly reduce the cost of oil extraction.

  4. (iv)

    Alternative carbon, nitrogen, phosphorus and microelements from waste biomass as a sustainable and renewable nutrient supply. A. fumigatus pellets grown on wheat straw showed high algal flocculation rates. Fungal/algal co-pellets showed a synergistic effect on the bioremediation of swine wastewater. Growing fungal and algal cells on alternative sources of carbon and N/P and subsequent wastewater filtration can potentially improve the economics of large-scale algal biotechnology. Dilution of wastewater with seawater for treatment with A. fumigatus/T. suecica pellets reduced the amount of freshwater required, thereby making the whole process more economic.

  5. (v)

    Sustainable bioenergy/biofuel production. Because of their high growth rate, high lipid yield and the composition of essential fatty acids, both components of the system, microalgae and fungi, can be used as feedstocks for the production of sustainable and renewable bioenergy/biofuels. In combination with the widely used TE-based biodiesel production, generated biomass can be thermochemically (via pyrolysis) converted into biogas, bio-solids and a range of glycerol-free petrochemicals including straight-chain C12 to C21 alkanes that can be directly used as the blending components of biodiesel. Since fungal chitin containing cell walls represent a formidable challenge for conventional chemical and biochemical oil-extraction methods, pyrolysis represents an attractive method for production of value-added chemicals from the fungal cells.

Methods

Fungal isolation

Fungal representatives were isolated from compost, straws and soil as a rich source of fungi. These samples were kept in ziplock plastic bags and stored at −20°C for further investigation. Selective media (BH medium) [96] was used as the basis for fungal isolation. The collected samples were serially diluted (10:1 to 10:6) using phosphate buffer saline (0.1 M) under, and an aliquot (150 μl) of each dilution was spread onto BH agar plates. These plates were incubated for 6 days at 30°C and 55°C for mesophilic and thermophilic fungi, respectively. For fungal isolation, an antibiotic solution of 0.015 g/L of tetracycline (dissolved in sterilized Milli-Q water, filtered through a sterile 0.22-μm filter) was added to the media. Following isolation, fungi were re-streaked until purified. All cultures were stored at −80°C with 25% of glycerol.

Preparation for seed fungal spores

For activation, the stored spores were grown at 25°C for 5 days on plates with potato dextrose broth (PDB) containing 20 g/L glucose. Sterile water (10 mL) was added to harvest the spores, and the spore solution was used as the inoculation for the co-culture after the number of spores in the solution was counted.

Preparation of fungal pellets

To achieve pelletization spore solutions (1.5 to 2.0 × 107 spores/L) were cultivated at 28°C in PDB or in carbon-free media (3 g/L peptone, 0.6 g/L KH2PO4, 0.001 g/L ZnSO4, 0.4 g/L K2HPO4, 0.005 g/L FeSO4, 0.5 g/L MnSO4, 0.5 g/L MgSO4) supplemented with 1% TWS, with a shaking speed of 150 rpm for 72 h. The spore solutions were then cultured at 28°C with a shaking speed of 150 rpm for 72 h to achieve pelletization. Before mixing with microalgal cultures, pellets were washed twice in sterile water, followed by sterile algal media.

Acid pretreatment of wheat straw

One gram of fine powder (approximately 1 mm sin size) of dry wheat straw was mixed with 1 M sulphuric acid and autoclaved for 10 min at 121°C, allowed to cool, filtered through Whatman No.1 filter paper, then washed 10 times with sterile water followed by 0.1 M sodium hydroxide. The powder was dried at 80°C and added to the media to a final concentration of 1%.

Screening of fungal strains for oil content

Screening of the fungi for oil yield was carried out using a slightly modified method described by [62]. Fungi were grown in Erlenmeyer flasks containing 50 mL of enrichment broth, EB [100 g/L glucose, 1 g/L yeast extract, 2 g/L potassium dihydrogen phosphate (KH2PO4), 0.75 g/L magnesium sulfate (MgSO4), 1 g/L di sodium hydrogen phosphate (Na2HPO4), 0.2 g/L calcium chloride, 0.01 g/L iron chloride, 0.1 g/L zinc chloride] in an orbital mixer/shaker at 25°C for 3 days. After 3 days, a 5 mL sample was taken from each flask and spun in a centrifuge at 5,000 rpm for 10 min and washed twice with sterile water. One fungal pellet was placed in the centre of a carbon-deficient agar (same as EB, no glucose, plus 15 g/L agarose). The growth area was marked and scanned at times, 0, 12 and 24 h. For relative growth rate analysis, the diameter of the final fungal growth after 12 and 24 h were divided by the diameter of the initial fungal inoculum (time 0).

Microalgal strains

Strains were obtained from a Culture Collection of Algae at the University of Texas at Austin (UTEX, http://web.biosci.utexas.edu/utex/). C. protothecoides was grown axenically under mixotrophic conditions (3% glucose, light) in the media described by UTEX. T. suecica was grown autotrophically in F2 media suggested by UTEX. Under mixotrophic and autotrophic conditions, cultures were grown in related media under constant light (200 μmol m−2 s−1), shaking at 150 rpm and 25°C. Growth rates were analyzed by (i) counting the cell numbers using a TC10™ Automated Cell Counter (BioRad, Hercules, CA, USA), (ii) by measuring OD540 for C. protothecoides and OD750 for T. suecica, (iii) by concentration of chlorophyll A + B using a POLARstar Omega Multi-Mode Microplate Reader with Fluorescent Polarization (BMG LABTECH, Ortenberg, Germany) and by biomass production. Chlorophyll was extracted with ethanol, and absorbance at 649, 665, and 750 nm was determined. Chlorophyll concentration (μg/mL) was calculated using the equation Chl (μg/mL) = [6.1x (E665 to E750) + 20.04 (E649 to E750)], K, where E is extinction at the corresponding wavelength; K is the dilution factor and 6.1 and 20.04 are extinction coefficients [97]. For biomass analysis, microalgal cultures were centrifuged at 6,000 g and then was washed twice with sterilized water and centrifuged again and dried at 65°C.

Nile red staining

For Nile red staining, the algal cells, fungal cells and co-cultivated pellets were collected by centrifugation and re-suspended in 1 mL of 20% DMSO containing 5 μL of Nile red stock solution (0.10 mg/mL of Nile red dissolved in acetone) and incubated at 50°C with shaking at 150 rpm for 5 min. The stained pellets were then subjected to fluorescence microscopy to observe the formation of lipid droplets in co-cultivated cells using a Leica DM 2500 with an attached camera (Leica DFC 310 FX). Nile red filter has excitation at 543 nm and emission at 555 to 650 nm.

Co-cultivation

For the 12-well microtitre plate experiments, fungal pellets grown on PDB were added to 4.5 mL of suspensions of C. protothecoides (grown mixotrophically, 1.5 × 107 cells/mL) and T. suecica (grown autotrophically, 6.5 × 106 cells/mL), and mixtures were shaken at 100 rpm for 24 h. Microalgal cell number, OD540 and OD750 and chlorophyll concentrations were analyzed at time 0 and 24 h. For 250 mL experiments, the fungal pellets were produced in PDB or 1% TWS for 3 days, excess liquid was removed using a Pasteur pipette and the pellets were washed with sterile water followed by algal medium. Algal culture (250 mL) was added (C. protothecoides, 1 to 3 × 109 cells/mL grown mixotrophically; T. suecica, 7 to 12 × 108 cells/mL, grown autotrophically). The mixtures were shaken at 150 rpm for 48 h under constant light (200 μmol m−2 s−1) at 25°C. Fungal and algal mono-cultures were also grown for 48 h as controls. All of the experiments were biologically replicated at least three times. Cell number, biomass, OD540/750 and chlorophyll concentrations were measured at time 0 and 48 h. Algal samples were analyzed 3 min after stopping rotation. Flocculation efficiency (FE) was calculated based on changes in OD, cell numbers and chlorophyll concentrations of uncaptured algal cells in the co-cultivation media at time 0 and 24/48 h later according to the following formula: \( \mathrm{F}\mathrm{E}\%=\frac{A-B}{A}\times 100 \), where A = OD, cell number and chlorophyll concentration at time 0; B = OD, cell number and chlorophyll concentration after 24 or 48 h. The morphology of the fungal and algal cells and co-cultivation pellets was observed under bright field conditions using a Leica DM 2500 with an attached camera (Leica DFC 310 FX, Solms, Germany).

Genotyping of fungal strains

The identification of the fungal strain was based on nucleotide sequence analysis of the internal transcribed space (ITS) region. Genomic DNA was extracted as described by [62,69]. The ITS1 region was amplified by PCR with primers ITS1: TCCGTAGGTGAACCTGCGG and ITS2: GCTGCG TTCTTCATCGATGC [69]. Satisfactory 16S rDNA sequences were codon aligned and compared with published reference strains in the National Centre of Biotechnology Information. An agreement between the query and reference sequences of more than 95% denoted a positive match. Confirmatory phylogenetic reconstruction was also performed using standard bioinformatics software such as the PAUP (Sinauer Associates Inc., Sunderland, MA, USA).

Wastewater treatment

The swine lagoon wastewater was provided by Dr J Hill, Termes Consulting Ltd, Melbourne. Swine wastewater was treated anaerobically. Wastewater samples were centrifuged to remove large particles, filtered through Whatman filter paper and autoclaved at 121°C, allowed to cool to room temperature and stored at 4°C. The concentrations of NH4 +-N and PO4 −3-P in the ASW were 680.7 and 145.7 mg/L, respectively. The concentration of other inorganic nitrogen in the wastewater, such as NO3 −-N, was very low and not reported. Wastewater was diluted to 25% with tap water for experiments with C. protothecoides and sea water for experiments with T. suecica. The fungal/algal pellets produced on PDB were harvested by filtration, and 200 wet pellets were added to the 250 mL of wastewater (approximately, 1 g/L DW). The mixtures were shaken at 150 rpm for 48 h. Samples of growth media were analyzed for ammonia cations, nitrate and phosphate anions using an ion chromatography system Dionex ICS-1100 (Thermo Scientific, Waltham, MA, USA).

Lipid yield and fatty acid profile analysis

Extraction and analysis of lipid yield and FAME composition analysis of algal, fungal and fungal-algal pellets were performed using a method previously described [98,99].

Biomass pyrolysis experiments

The experimental setup for biomass pyrolysis consists of a quartz tube reactor with the outside and inside diameter of 12 and 10 mm, respectively. A sample of algal biomass (pre-dried at 110°C overnight) (2.0 ± 0.1 g) was placed inside the reactor. Prior to each run, the reactor and all connecting lines were purged with ultra-pure Ar (99.999%). The flow rate of Ar sweep gas was set at a constant flow rate of 100 mL/min using a metering valve and a calibrated rotameter. Heating of the quartz tube reactor was carried out using a temperature-controlled tube furnace (Omega Engineering, Stamford, CT, USA). Two thermocouples (one external to the tube and one internal) were used to monitor the reactor temperature during pyrolysis. The furnace and the quartz tube were vertically aligned, so that the liquid products dripped into the condenser assembly, which was chilled using ice. After condensation of the liquid product, the gas passed through a glass wool filter before being collected in a gas sampling Teflon bag. The condenser was weighed before and after the reaction to determine the amount of the liquid product collected. The solid product (bio-char) of pyrolysis was collected and weighed.

Analysis of biomass pyrolysis products

Gaseous product analysis

The pyrolysis gas analysis was performed using a Varian 450 gas chromatograph (GC) with thermal conductivity detector (TCD) for permanent gases (H2, air, CH4, CO, CO2) and flame ionization detector (FID) for hydrocarbon gases. Argon was used as a carrier gas, and three columns were used for GC separation: PLOT alumina/KCl, molecular sieve 5A and Haysep Q.

Liquid product analysis

The collected biomass pyrolysis liquid product (bio-oil) was dissolved in aliquot amounts of dichloromethane (DCM) and injected into the Agilent 6890 N (Agilent Technologies, Santa Clara, CA, USA) coupled to a JEOL GCMate-II (JEOL, Akishima-shi, Tokyo, Japan) gas chromatograph-mass spectrometer (GC-MS). Typical (GC-MS) parameters used in the bio-oil analyses were as follows: carrier gas He flow of 2 mL/min, column: HP-5ms (60 m × 0.32 mm × 0.25 mm), injection port temperature: 300°C, GC interface temperature: 250°C, ion source temperature: 250°C, sample injection volume: 5 μL, split ratio: 50:1. The peaks in the chromatograms were identified using the search-match function in the MS software.

Thermogravimetric analysis

The thermogravimetric (TGA) and derivative thermogravimetric (DTG) analyses of the biomass samples were carried out using a Perkin-Elmer Diamond TG/DTA instrument with helium or ultra-zero air as carrier (sweeping) gases at the flowrate of 200 mL/min. In a typical TGA/DTG analysis, about 12 mg of the sample was loaded into the instrument and heated from 25°C to 950°C at the heating rate of 20°C/min in helium (pyrolysis mode) or air (combustion mode). The dry biomass samples were used as is (without additional drying). TGA, run using He as carrier gas was used to determine the moisture, volatiles and fixed carbon contents, whereas TGA with air as a carrier gas was used to determine the ash content of biomass samples. The ash content of the sample was found from the amount of solids remaining at the end of the TGA combustion mode run. The amount of fixed carbon was calculated by subtracting the ash content from the amount of solids remaining at the end of the TGA pyrolysis mode run.

SEM analysis

SEM analysis was conducted using a Hitachi TM-1000 tabletop scanning electron microscope. Energy-dispersive spectroscopic (EDS) analysis of the bio-char and ash samples was conducted using a Bruker AXS instrument.

Statistical analysis

All experiments in this study were conducted in triplicate. The experimental data were subjected to one-way analysis of variance (ANOVA) as implemented in the GraphPad InStat 3 statistics platform. Tukey simultaneous tests were conducted to determine the statistical differences between treatments. In order to ascertain that the observed variations in growth rates, efficiency of nutrients uptake and the yield of pyrolysis products were statistically significant, probability (P) values were determined. A 95% confidence level (P ≤ 0.05) was applied for all analyses.

Abbreviations

AC:

activated carbons

A. fumigatus :

Aspergillus fumigatus

Algal:

strains

C. protothecoides :

Chlorella protothecoides

T. suecica :

Tetraselmis suecica

ASW:

anaerobically digested swine wastewater

EDS:

energy-dispersive X-ray spectroscopy

dw:

dry weight

DTA:

differential thermal analysis

DTG:

derivative thermogravimetric analysis

FID:

flame ionization detector

GC:

gas chromatography

HPLC:

high-performance liquid chromatography

LC-MS:

liquid chromatography-mass spectroscopy

SEM:

scanning electron micrograph

TCD:

thermal conductivity detector

TGA:

thermogravimetric analysis

TE:

transesterification

TWS:

acid-treated wheat straw

References

  1. Pinzi S, Leiva-Candia D, Lopez-Garcia I, Redel-Macias MD, Dorado MP. Latest trends in feedstocks for biodiesel production. Biofuel Bioprod Bior. 2014;8:126–43.

    Article  CAS  Google Scholar 

  2. Lam MK, Lee KT. Microalgae biofuels: a critical review of issues, problems and the way forward. Biotechnol Adv. 2012;30:673–90.

    Article  CAS  Google Scholar 

  3. Aguirre AM, Bassi A, Saxena P. Engineering challenges in biodiesel production from microalgae. Crit Rev Biotechnol. 2013;33:293–308.

    Article  CAS  Google Scholar 

  4. Rajkumar R, Yaakob Z, Takriff MS. Potential of the micro and macro algae for biofuel production: a brief review. Bioresources. 2014;9:1606–33.

    Google Scholar 

  5. Wu YH, Hu HY, Yu Y, Zhang TY, Zhu SF, Zhuang LL, et al. Microalgal species for sustainable biomass/lipid production using wastewater as resource: a review. Renew Sust Energ Rev. 2014;33:675–88.

    Article  CAS  Google Scholar 

  6. Olguin EJ. Dual purpose microalgae-bacteria-based systems that treat wastewater and produce biodiesel and chemical products within a biorefinery. Biotechnol Adv. 2012;30:1031–46.

    Article  CAS  Google Scholar 

  7. de Boer K, Moheimani NR, Borowitzka MA, Bahri PA. Extraction and conversion pathways for microalgae to biodiesel: a review focused on energy consumption. J Appl Phycol. 2012;24:1681–98.

    Article  CAS  Google Scholar 

  8. Pragya N, Pandey KK, Sahoo PK. A review on harvesting, oil extraction and biofuels production technologies from microalgae. Renew Sustain Energy Rev. 2013;24:159–71.

    Article  CAS  Google Scholar 

  9. Christenson L, Sims R. Production and harvesting of microalgae for wastewater treatment, biofuels, and bioproducts. Biotechnol Adv. 2011;29:686–702.

    Article  CAS  Google Scholar 

  10. Duong VT, Li Y, Nowak E, Schenk PM. Microalgae isolation and selection for prospective biodiesel production. Energies. 2012;5:1835–49.

    Article  CAS  Google Scholar 

  11. Khan MS, Khan MK, Siddiqui MH, Arif JM. An in vivo and in silico approach to elucidate the tocotrienol-mediated fortification against infection and inflammation induced alterations in antioxidant defense system. Eur Rev Med Pharmacol Sci. 2011;15:916–30.

    CAS  Google Scholar 

  12. Keymer P, Ruffell I, Pratt S, Lant P. High pressure thermal hydrolysis as pre-treatment to increase the methane yield during anaerobic digestion of microalgae. Bioresource Technol. 2013;131:128–33.

    Article  CAS  Google Scholar 

  13. Leite GB, Abdelaziz AEM, Hallenbeck PC. Algal biofuels: challenges and opportunities. Bioresource Technol. 2013;145:134–41.

    Article  CAS  Google Scholar 

  14. Hamawand I, Yusaf T, Hamawand S. Growing algae using water from coal seam gas industry and harvesting using an innovative technique: a review and a potential. Fuel. 2014;117:422–30.

    Article  CAS  Google Scholar 

  15. Wei P, Cheng LH, Zhang L, Xu XH, Chen HL, Gao CJ. A review of membrane technology for bioethanol production. Renew Sust Energ Rev. 2014;30:388–400.

    Article  CAS  Google Scholar 

  16. Vandamme D, Foubert I, Muylaert K. Flocculation as a low-cost method for harvesting microalgae for bulk biomass production. Trends Biotechnol. 2013;31:233–9.

    Article  CAS  Google Scholar 

  17. Gultom SO, Hu B. Review of microalgae harvesting via co-pelletization with filamentous fungus. Energies. 2013;6:5921–39.

    Article  Google Scholar 

  18. Milledge J, Heaven S. A review of the harvesting of micro-algae for biofuel production. Rev Environ Sci Bio. 2013;12:165–78.

    Article  Google Scholar 

  19. Sharma KK, Garg S, Li Y, Malekizadeh A, Schenk PM. Critical analysis of current microalgae dewatering techniques. Biofuels. 2013;4:397–407.

    Article  CAS  Google Scholar 

  20. Gressel J, van der Vlugt CJB, Bergmans HEN. Environmental risks of large scale cultivation of microalgae: mitigation of spills. Algal Research. 2013;2:286–98.

    Article  Google Scholar 

  21. Coward T, Lee JGM, Caldwell GS. Development of a foam flotation system for harvesting microalgae biomass. Algal Research. 2013;2:135–44.

    Article  Google Scholar 

  22. Garg S, Wang LG, Schenk PM. Effective harvesting of low surface-hydrophobicity microalgae by froth flotation. Bioresource Technol. 2014;159:437–41.

    Article  CAS  Google Scholar 

  23. Molina Grima E, Belarbi EH, Acién Fernández FG, Robles Medina A, Chisti Y. Recovery of microalgal biomass and metabolites: process options and economics. Biotechnol Adv. 2003;20:491–515.

    Article  CAS  Google Scholar 

  24. Uduman N, Qi Y, Danquah MK, Hoadley AFA. Marine microalgae flocculation and focused beam reflectance measurement. Chem Eng J. 2010;162:935–40.

    Article  CAS  Google Scholar 

  25. Schenk PM, Thomas-Hall SR, Stephens E, Marx UC, Mussgnug JH, Posten C, et al. Second generation biofuels: high-efficiency microalgae for biodiesel production. Bioenerg Res. 2008;1:20–43.

    Article  Google Scholar 

  26. Gonzalez-Fernandez C, Ballesteros M. Microalgae autoflocculation: an alternative to high-energy consuming harvesting methods. J Appl Phycol. 2013;25:991–9.

    Article  CAS  Google Scholar 

  27. Schlesinger A, Eisenstadt D, Bar-Gil A, Carmely H, Einbinder S, Gressel J. Inexpensive non-toxic flocculation of microalgae contradicts theories; overcoming a major hurdle to bulk algal production. Biotechnol Adv. 2012;30:1023–30.

    Article  CAS  Google Scholar 

  28. Lee AK, Lewis DM, Ashman PJ. Harvesting of marine microalgae by electroflocculation: the energetics, plant design, and economics. Appl Energ. 2013;108:45–53.

    Article  Google Scholar 

  29. Manheim D, Nelson Y. Settling and bioflocculation of two species of algae used in wastewater treatment and algae biomass production. Environ Prog Sustain. 2013;32:946–54.

    Article  CAS  Google Scholar 

  30. Powell RJ, Hill RT. Rapid aggregation of biofuel-producing algae by the bacterium bacillus sp. strain RP1137. Appl Environ Microb. 2013;79:6093–101.

    Article  CAS  Google Scholar 

  31. Lee J, Cho DH, Ramanan R, Kim BH, Oh HM, Kim HS. Microalgae-associated bacteria play a key role in the flocculation of Chlorella vulgaris. Bioresource Technol. 2013;131:195–201.

    Article  CAS  Google Scholar 

  32. Luo SS, Dong ZJ, Wu XD, Liu YH, Ruan R. Pelletization behavior of fungal chlorella sp symbiosis system. Research Journal of Biotechnology. 2013;8:56–9.

    CAS  Google Scholar 

  33. Zhang JG, Hu B. A novel method to harvest microalgae via co-culture of filamentous fungi to form cell pellets. Bioresource Technol. 2012;114:529–35.

    Article  CAS  Google Scholar 

  34. Liu Y, Liao W, Chen SL. Study of pellet formation of filamentous fungi Rhizopus oryzae using a multiple logistic regression model. Biotechnol Bioeng. 2008;99:117–28.

    Article  CAS  Google Scholar 

  35. Xia CJ, Wei W, Hu B. Statistical analysis and modeling of pelletized cultivation of Mucor circinelloides for microbial lipid accumulation. Appl Biochem Biotech. 2014;172:3502–12.

    Article  CAS  Google Scholar 

  36. Xie SX, Sun S, Dai SY, Yuan JS. Efficient coagulation of microalgae in cultures with filamentous fungi. Algal Research. 2013;2:28–33.

    Article  Google Scholar 

  37. Zhou WG, Cheng YL, Li Y, Wan YQ, Liu YH, Lin XY, et al. Novel fungal pelletization-assisted technology for algae harvesting and wastewater treatment. Appl Biochem Biotech. 2012;167:214–28.

    Article  CAS  Google Scholar 

  38. Zhou WG, Min M, Hu B, Ma XC, Liu YH, Wang Q, et al. Filamentous fungi assisted bio-flocculation: a novel alternative technique for harvesting heterotrophic and autotrophic microalgal cells. Sep Purif Technol. 2013;107:158–65.

    Article  CAS  Google Scholar 

  39. Wrede D, Taha M, Miranda AF, Kadali K, Stevenson T, Ball A, et al. Co-cultivation of fungal and microalgal cells as an efficient system for harvesting microalgal cells, lipid production and wastewater treatment. Plos One. 2014;9:e113497.

    Article  Google Scholar 

  40. Talukder MMR, Das P, Wu JC. Immobilization of microalgae on exogenous fungal mycelium: a promising separation method to harvest both marine and freshwater microalgae. Biochem Eng J. 2014;91:53–7.

    Article  CAS  Google Scholar 

  41. Taylor TN, Hass H, Remy W, Kerp H. The oldest fossil lichen. Nature. 1995;378:244–4.

    Article  CAS  Google Scholar 

  42. Zoller S, Lutzoni F. Slow algae, fast fungi: exceptionally high nucleotide substitution rate differences between lichenized fungi Omphalina and their symbiotic green algae Coccomyxa. Mol Phylogenet Evol. 2003;29:629–40.

    Article  CAS  Google Scholar 

  43. Singh AP, Singh T. Biotechnological applications of wood-rotting fungi: a review. Biomass Bioenerg. 2014;62:198–206.

    Article  CAS  Google Scholar 

  44. Xia C, Zhang J, Zhang W, Hu B. A new cultivation method for microbial oil production: cell pelletization and lipid accumulation by Mucor circinelloides. Biotechnol Biofuels. 2011;4:15.

    Article  Google Scholar 

  45. Yin LJ, Jiang ST, Pon SH, Lin HH. Hydrolysis of chlorella by cellulomonas sp. YJ5 cellulases and its biofunctional properties. J Food Sci. 2010;75:H317–23.

    Article  CAS  Google Scholar 

  46. Surendhiran D, Vijay M. Effect of various pretreatment for extracting intracellular lipid from Nannochloropsis oculata under nitrogen replete and depleted conditions. ISRN Chemical Engineering. 2014;2014:9.

    Article  Google Scholar 

  47. Demirbas A. Analysis of liquid products from biomass via flash pyrolysis. Energ Source. 2002;24:337–45.

    Article  CAS  Google Scholar 

  48. Gercel HF. The effect of a sweeping gas flow rate on the fast pyrolysis of biomass. Energ Source. 2002;24:633–42.

    Article  CAS  Google Scholar 

  49. Miao XL, Wu QY, Yang CY. Fast pyrolysis of microalgae to produce renewable fuels. J Anal Appl Pyrolysis. 2004;71:855–63.

    Article  CAS  Google Scholar 

  50. Demirbas A. Oily products from mosses and algae via pyrolysis. Energy Sources Part a - Recovery Utilization and Environmental Effects. 2006;28:933–40.

  51. Miao XL, Wu QY. Biodiesel production from heterotrophic microalgal oil. Bioresource Technol. 2006;97:841–6.

    Article  CAS  Google Scholar 

  52. Miao XL, Wu QY. High yield bio-oil production from fast pyrolysis by metabolic controlling of Chlorella protothecoides. J Biotechnol. 2004;110:85–93.

    Article  CAS  Google Scholar 

  53. Muradov N, Taha M, Miranda AF, Kadali K, Gujar A, Rochfort S, et al. Dual application of duckweed and azolla plants for wastewater treatment and renewable fuels and petrochemicals production. Biotechnol Biofuels. 2014;7:30.

    Article  Google Scholar 

  54. Muradov N, Fidalgo B, Gujar AC, T-Raissi A. Pyrolysis of fast-growing aquatic biomass - Lemna minor (duckweed): characterization of pyrolysis products. Bioresour Technol. 2010;101:8424–8.

    Article  CAS  Google Scholar 

  55. Miranda AF, Muradov N, Gujar A, Stevenson T, Nugegoda D, Ball AS, et al. Application of aquatic plants for the treatment of selenium-rich mining wastewater and production of renewable fuels and petrochemicals. Journal of Sustainable Bioenergy Systems. 2014;4:97–112.

    Article  CAS  Google Scholar 

  56. Muradov N, Fidalgo B, Gujar AC, Garceau N, T-Raissi A. Production and characterization of Lemna minor bio-char and its catalytic application for biogas reforming. Biomass & Bioenergy. 2012;42:123–31.

    Article  CAS  Google Scholar 

  57. Montero MF, Aristizabal M, Reina GG. Isolation of high-lipid content strains of the marine microalga Tetraselmis suecica for biodiesel production by flow cytometry and single-cell sorting. J Appl Phycol. 2011;23:1053–7.

    Article  CAS  Google Scholar 

  58. Lee CG, Kwon JS, Kim ES. Biodiesel production from marine microalga, Dunaliella tertiolecta, Tetraselmis chui and Nannochloris oculata. J Biosci Bioeng. 2009;108:S130–1.

    Article  Google Scholar 

  59. San Pedro A, Gonzalez-Lopez CV, Acien FG, Molina-Grima E. Marine microalgae selection and culture conditions optimization for biodiesel production. Bioresource Technol. 2013;134:353–61.

    Article  CAS  Google Scholar 

  60. Teo CL, Atta M, Bukhari A, Taisir M, Yusuf AM, Idris A. Enhancing growth and lipid production of marine microalgae for biodiesel production via the use of different LED wavelengths. Bioresource Technol. 2014;162:38–44.

    Article  CAS  Google Scholar 

  61. Heredia-Arroyo T, Wei W, Hu B. Oil accumulation via heterotrophic/mixotrophic Chlorella protothecoides. Appl Biochem Biotech. 2010;162:1978–95.

    Article  CAS  Google Scholar 

  62. Li SL, Feng SL, Li ZT, Xu H, Yu YP, Qiao DR, et al. Isolation, identification and characterization of oleaginous fungi from the soil of Qinghai Plateau that utilize D-xylose. Afr J Microbiol Res. 2011;5:2075–81.

    CAS  Google Scholar 

  63. Pillinger JM, Cooper JA, Ridge I. Role of phenolic compounds in the antialgal activity of barley straw. J Chem Ecol. 1994;20:1557–69.

    Article  CAS  Google Scholar 

  64. Acharya PB, Acharya DK, Modi HA. Optimization for cellulase production by Aspergillus niger using saw dust as substrate. Afr J Biotechnol. 2008;7:4147–52.

    CAS  Google Scholar 

  65. Harun R, Danquah MK. Enzymatic hydrolysis of microalgal biomass for bioethanol production. Chem Eng J. 2011;168:1079–84.

    Article  CAS  Google Scholar 

  66. Braun E, Aach HG. Enzymatic degradation of the cell wall of Chlorella. Planta. 1975;126:181–5.

    Article  CAS  Google Scholar 

  67. Gerken HG, Donohoe B, Knoshaug EP. Enzymatic cell wall degradation of Chlorella vulgaris and other microalgae for biofuels production. Planta. 2013;237:239–53.

    Article  CAS  Google Scholar 

  68. Webber MM, Webber PJ. Ultrastructure of lichen haustoria: symbiosis in Parmelia sulcata. Can J Bot. 1970;48:1521–4.

    Article  Google Scholar 

  69. Khot M, Kamat S, Zinjarde S, Pant A, Chopade B, RaviKumar A. Single cell oil of oleaginous fungi from the tropical mangrove wetlands as a potential feedstock for biodiesel. Microb Cell Fact. 2012;11:71.

    Article  CAS  Google Scholar 

  70. Karimi K, Zamani A. Mucor indicus: biology and industrial application perspectives: a review. Biotechnol Adv. 2013;31:466–81.

    Article  CAS  Google Scholar 

  71. Sergeeva YE, Galanina LA, Andrianova DA, Feofilova EP. Lipids of filamentous fungi as a material for producing biodiesel fuel. Appl Biochem Micro+. 2008;44:523–7.

  72. Bondioli P, Della Bella L, Rivolta G, Zittelli GC, Bassi N, Rodolfi L, et al. Oil production by the marine microalgae Nannochloropsis sp. F&M-M24 and Tetraselmis suecica F&M-M33. Bioresource Technol. 2012;114:567–72.

    Article  CAS  Google Scholar 

  73. Price MS, Classen JJ, Payne GA. Aspergillus niger absorbs copper and zinc from swine wastewater. Bioresour Technol. 2001;77:41–9.

    Article  CAS  Google Scholar 

  74. Sharma P, Kaur H, Sharma M, Sahore V. A review on applicability of naturally available adsorbents for the removal of hazardous dyes from aqueous waste. Environ Monit Assess. 2011;183:151–95.

    Article  CAS  Google Scholar 

  75. Swami D, Buddhi D. Removal of contaminants from industrial wastewater through various non-conventional technologies: a review. Int J Environ Pollut. 2006;27:324–46.

    CAS  Google Scholar 

  76. Sing SF, Isdepsky A, Borowitzka MA, Moheimani NR. Production of biofuels from microalgae. Mitig Adapt Strat Gl. 2013;18:47–72.

    Article  Google Scholar 

  77. Mészáros E, Várhegyi G, Jakab E, Marosvölgyi B. Thermogravimetric and reaction kinetic analysis of biomass samples from an energy plantation. Energ Fuel. 2004;18:497–507.

    Article  Google Scholar 

  78. Skodras G, GrammelisO P, Basinas P, Kakaras E, Sakellaropoulos G. Pyrolysis and combustion characteristics of biomass and waste-derived feedstock. Ind Eng Chem Res. 2006;45:3791–9.

    Article  CAS  Google Scholar 

  79. Daneshvar SS, F.; and Otsuka, K. Pyrolytic behavior of green macro algae and evaluation of its activation energy. International Journal of Chemical Engineering and Application. 201;3:256–63.

  80. Shuping Z, Yulong W, Mingde Y, Chun L, Junmao T. Pyrolysis characteristics and kinetics of the marine microalgae Dunaliella tertiolecta using thermogravimetric analyzer. Bioresource Technol. 2010;101:359–65.

    Article  Google Scholar 

  81. Renugopalakrishnan V, Wei X, Narasimhan G, Verma CS, Li P, Anumanthan A. Enhancement of protein thermal stability: toward the design of robust proteins for bionanotechnological applications. In Bionanotechnology. Edited by Renugopalakrishnan V, Lewis R. Springer Netherlands; 2006: 117–13.

  82. Ranzi E, Cuoci A, Faravelli T, Frassoldati A, Migliavacca G, Pierucci S, et al. Chemical Kinetics of Biomass Pyrolysis. Energy Fuel. 2008;22:4292–300.

    Article  CAS  Google Scholar 

  83. Trinh TN, Jensen, P.A., Sørensen, R.H., Dam-Johansen, K., Søren, H. Flash pyrolysis properties of algae and lignin residue. In 20th European Biomass Conference and Exhibition; Milan, Italy. 2012; 966–72.

  84. Senneca O, Chirone R, Salatino P. A thermogravimetric study of nonfossil solid fuels. 2. Oxidative pyrolysis and char combustion. Energ Fuel. 2002;16:661–8.

    Article  CAS  Google Scholar 

  85. Chow MC, Jackson WR, Chaffee AL, Marshall M. Thermal treatment of algae for production of biofuel. Energ Fuel. 2013;27:1926–50.

    Article  CAS  Google Scholar 

  86. Ross AB, Anastasakis K, Kubacki M, Jones JM. Investigation of the pyrolysis behaviour of brown algae before and after pre-treatment using PY-GC/MS and TGA. J Anal Appl Pyrol. 2009;85:3–10.

    Article  CAS  Google Scholar 

  87. Netscher T. Synthesis of vitamin E. Vitam Horm. 2007;76:155–202.

    Article  CAS  Google Scholar 

  88. Daines AM, Payne RJ, Humphries ME, Abell AD. The synthesis of naturally occurring vitamin K and vitamin K analogues. Curr Org Chem. 2003;7:1625–34.

    Article  CAS  Google Scholar 

  89. McGinty D, Letizia CS, Api AM. Fragrance material review on phytol. Food Chem Toxicol. 2010;48:S59–63.

    Article  CAS  Google Scholar 

  90. Borowitzka MA, Moheimani NR. Sustainable biofuels from algae. Mitig Adapt Strat Gl. 2013;18:13–25.

    Article  Google Scholar 

  91. Azargohar R, Dalai AK. Biochar as a precursor of activated carbon. In Applied Biochemistry and Biotechnology. Edited by McMillan J, Adney W, Mielenz J, Klasson K: Humana Press, 2006, 129–32: 762–773.

  92. Antal Jr MJ, Varhegyi G. Cellulose pyrolysis kinetics: the current state of knowledge. Ind Eng Chem Res. 1995;34:703–17.

    Article  CAS  Google Scholar 

  93. Sharif Hossain ABM, Salleh A, Boyce AN, Chowdhury P, Naqiuddin M. Biodiesel fuel production from algae as renewable energy. Am J Biochem Biotechnol. 2008;4:250–4.

    Article  Google Scholar 

  94. Muradov N. Decarbonization at crossroads: the cessation of the positive historical trend or a temporary detour? Energ Environ Sci. 2013;6:1060–73.

    Article  CAS  Google Scholar 

  95. Muradov N. Liberating energy from carbon: introduction to decarbonization. Springer New York: Heidelberg Dordrecht London; 2014.

    Book  Google Scholar 

  96. Bushnell LD, Haas HF. The utilization of certain hydrocarbons by microorganisms. J Bacteriol. 1941;41:653–73.

    CAS  Google Scholar 

  97. Lichtenthaler HK. Chlorophylls and carotenoids - pigments of photosynthetic biomembranes. Methods Enzymol. 1987;148:350–82.

    Article  CAS  Google Scholar 

  98. O’Fallon JV, Busboom JR, Nelson ML, Gaskins CT. A direct method for fatty acid methyl ester synthesis: application to wet meat tissues, oils, and feedstuffs. J Anim Sci. 2007;85:1511–21.

    Article  Google Scholar 

  99. O’Fallon JV, Busboom JR, Nelson ML, Gaskins CT. A direct method for fatty acid methyl ester (FAME) synthesis. Poultry Sci. 2007;86:279–80.

    Google Scholar 

Download references

Acknowledgements

This work was supported by the College of Science, Engineering and Health and the School of Applied Sciences, Royal Melbourne Institute of Technology University. The authors also thank Dr J Hill, Termes Consulting Ltd, Melbourne for proving anaerobically digested swine wastewater. The authors thank Muhammad Hanis and Mohd Ismail for involvement in the assessment of the anti-algal effect of A. fumigatus/TSW extracts. The authors also thank Dr. Ali T-Raissi (UCF), Dr Nathan Bott and Bryan Cooke (RMIT University) for fruitful discussions.

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Aidyn Mouradov.

Additional information

Competing interests

The authors declare that they have no competing interests.

Authors’ contributions

AM designed the project and conducted the large part of the biotechnological experiments, was involved in interpretation of data for the work, made substantial contributions in writing a manuscript, and approved the final version for publication. NM made substantial contributions to designing and conducting the pyrolysis experiments, critically revised the generated data, contributed to the writing and final approval of the manuscript and to the analysis and interpretation of data and critically revised and approved the final version for publication. DW was involved in growing algal and fungal strains and co-pelletization experiments, extracting oil and analyzing their level and compositions. MT was involved in growing fungal strains and analyzing their biomass and growth rates. AFM was involved in growing algae, analyzing their biomass and growth rates and contributing to the statistical analysis of generated data. KK analyzed the nutrient composition of wastewater, made substantial contributions to interpretation of data, and contributed to writing and the final approval of the manuscript. AG made substantial contributions to designing and conducting the pyrolysis experiments. ASB made substantial contributions to interpretation of the data for the work and drafting the work and approved the final version for publication. TS made substantial contributions to interpretation of the data for the work and drafting the work and approved the final version for publication. All authors were involved in the final approval of the version to be published and agreed to be accountable for all aspects of the work. All authors read and approved the final manuscript.

Additional files

Additional file 1:

Lichen phenotypes. Bar = 10 cm.

Additional file 2:

Table of fungal strains.

Additional file 3:

Screening of fungal strains on carbon-free media for oil accumulation. (A) Phenotypic evaluation of fungal strains grown on carbon-free plates; 1) diameter of fungal growth area at time 0; 2) diameter of fungal growth area after 12 h; 3) diameter of fungal growth area after 24 h; (B) growth ratio of 33 fungal strains on carbon-free plates.

Additional file 4:

Phenotypic evaluation of fungal pelletization. (A) Fungal representatives grown on PDB; (B) A. fumigatus grown on PDB. 1) pellets grown at 250 rpm; (2) pellets grown at 150 rpm; 3) pellets grown at 50 rpm. Bar = 1 cm.

Additional file 5:

Microscopic analysis of A. fumigatus -algal pellets. (A-D) Cross section of A. fumigatus/T. suecica pellet: (A) middle part of pellet; (B) between parts A and C; (C, D) surface of pellet; (E, F, I) A. fumigatus/C. protothecoides; (G, H, J, K, L, M) A. fumigatus/T. suecica. A-D: 20 μm cryo-sections; (E-M): images of algal-fungal suspensions; A, B, C, E, G: bright-field images; D, F, H, K, L, M: UV light images. red spots represent chloroplast’s fluorescence; (I, J) Nile red staining. Yellow spots represent oil bodies; CV cell walls. Scale = 20 μm.

Additional file 6:

Evaluation of microalgal growth in media containing 5% and 20% of A. fumigatus/ TWS media. 1) control; 2) algal growth media containing 5% of A. fumigatus/TWS media; 3) algal growth media containing 20% A. fumigatus/TWS media.

Additional file 7:

Optical and SEM images of bio-char and inorganic ash. (A) Bio-char from A. fumigatus/C. protothecoides; (B) bio-char from A. fumigatus; (C) ash from C. protothecoides, (D) SEM of ash from C. protothecoides (magnification × 2,500).

Additional file 8:

EDS spectra of the ash and bio-chars produced from biomass samples. (A) Ash from C. protothecoides; (B) bio-char from A. fumigatus/C. protothecoides; (C) bio-char from A. fumigatus. The distribution of elements is presented in atomic percent.

Rights and permissions

Open Access  This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made.

The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder.

To view a copy of this licence, visit https://creativecommons.org/licenses/by/4.0/.

The Creative Commons Public Domain Dedication waiver (https://creativecommons.org/publicdomain/zero/1.0/) applies to the data made available in this article, unless otherwise stated in a credit line to the data.

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Muradov, N., Taha, M., Miranda, A.F. et al. Fungal-assisted algal flocculation: application in wastewater treatment and biofuel production. Biotechnol Biofuels 8, 24 (2015). https://doi.org/10.1186/s13068-015-0210-6

Download citation

  • Received:

  • Accepted:

  • Published:

  • DOI: https://doi.org/10.1186/s13068-015-0210-6

Keywords