- Open Access
Enhanced degradation of softwood versus hardwood by the white-rot fungus Pycnoporus coccineus
Biotechnology for Biofuels volume 8, Article number: 216 (2015)
White-rot basidiomycete fungi are potent degraders of plant biomass, with the ability to mineralize all lignocellulose components. Recent comparative genomics studies showed that these fungi use a wide diversity of enzymes for wood degradation. Deeper functional analyses are however necessary to understand the enzymatic mechanisms leading to lignocellulose breakdown. The Polyporale fungus Pycnoporus coccineus BRFM310 grows well on both coniferous and deciduous wood. In the present study, we analyzed the early response of the fungus to softwood (pine) and hardwood (aspen) feedstocks and tested the effect of the secreted enzymes on lignocellulose deconstruction.
Transcriptomic and proteomic analyses revealed that P. coccineus grown separately on pine and aspen displayed similar sets of transcripts and enzymes implicated in lignin and polysaccharide degradation. In particular, the expression of lignin-targeting oxidoreductases, such as manganese peroxidases, increased upon cultivation on both woods. The sets of enzymes secreted during growth on both pine and aspen were more efficient in saccharide release from pine than from aspen, and characterization of the residual solids revealed polysaccharide conversion on both pine and aspen fiber surfaces.
The combined analysis of soluble sugars and solid residues showed the suitability of P. coccineus secreted enzymes for softwood degradation. Analyses of solubilized products and residual surface chemistries of enzyme-treated wood samples pointed to differences in fiber penetration by different P. coccineus secretomes. Accordingly, beyond the variety of CAZymes identified in P. coccineus genome, transcriptome and secretome, we discuss several parameters such as the abundance of manganese peroxidases and the potential role of cytochrome P450s and pectin degradation on the efficacy of fungi for softwood conversion.
Degradation of lignocellulosic biomass is efficiently achieved in nature by many organisms, among which filamentous fungi are considered key primary degraders. In particular, white-rot basidiomycete fungi are able to completely degrade all lignocellulose components, including cellulose, hemicellulose and lignin. Detailed characterization of Phanerochaete chrysosporium [1–3], and genomic, transcriptomic or secretomic analyses of other white-rot fungi including Phanerochaete carnosa [4–6], Irpex lacteus , Ceriporiopsis subvermispora [8, 9], Phlebiopsis gigantea , and Dichomitus squalens  have described the main lignocellulolytic enzymes involved in the biodegradation of wood. The order Polyporales is a group of fungi comprising many wood-rotters, and therefore particularly important to the discovery of new and more efficient biocatalysts for applications in plant biomass conversion. As of 2014, 11 Polyporales genomes were available out of the 31 genomes sequenced from the Agaricomycetes class , which in turn spurred several comparative analyses of genome sequences [13, 14] and of substrate-dependent secretomes [15, 16].
While many white-rot fungi characterized to date appear to grow better on hardwood than coniferous softwood, certain white-rot fungi, including P. carnosa , P. gigantea , and D. squalens , grow efficiently on softwood. Differences in fungi’s ability to utilize coniferous wood as a carbon source have been attributed to softwood lignin and hemicellulose compositions as compared to most hardwood species. For example, whereas acetylated glucuronoxylan is the main hemicellulose polymer in hardwood tissues, galactoglucomannan is the most abundant in coniferous wood . Lignin contents also differ, where the fraction of guaiacyl lignin in coniferous wood is generally higher than that of the hardwood guaiacyl–syringyl lignin, while also being more extensively cross-linked . Finally woody biomass also contains extractive compounds that vary considerably between tree species and plant tissues. For example, certain extractives including some fatty acids and phenolics (e.g. tannins) are generally found in both softwoods and hardwoods, whereas terpenes generally are dominant in softwoods .
The Pycnoporus genus belongs to the Polyporales order, and the four Pycnoporus species (P. cinnabarinus, P. sanguineus, P. coccineus and P. puniceus) are categorized as white-rot fungi. P. cinnabarinus is widely distributed in the Northern hemisphere, whereas P. coccineus is found in countries bordering the Indian and Pacific oceans. P. sanguineus is a pan-tropical species encountered in both hemispheres, and P. puniceus is a rare species found in Africa, India, Malaysia and New Caledonia. The genome of P. cinnabarinus was released in 2014  and was found to encode a full complement of carbohydrate-active enzymes (CAZyme) required for polysaccharide degradation including classical hydrolases; cellobiohydrolases from Glycoside Hydrolase (GH) families GH6 and GH7, endoglucanases (GH5, GH12, GH45, GH74, GH131), β-glucosidases (GH1, GH3); and 15 lytic polysaccharide monooxygenases (LPMO) from the Auxiliary Activity (AA) family AA9. In addition, P. cinnabarinus possesses a complete and versatile enzymatic arsenal for lignin breakdown. For instance, several genes encoding members of the three ligninolytic peroxidase subfamilies, namely lignin peroxidases (LiP), manganese peroxidases (MnP) and versatile peroxidases (VP) were identified. P. cinnabarinus has been used for biotechnological applications due to its ability to produce high-value compounds such as aromas and antioxidants (for a review see ).
In addition to P. cinnabarinus, the genome of P. coccineus has been recently released by the JGI (http://genome.jgi.doe.org/Pycco1/Pycco1.home.html). At the same time, our preliminary studies demonstrated that one strain of P. coccineus, namely P. coccineus CIRM-BRFM 310, grew better on both deciduous and coniferous wood preparations than P. cinnabarinus CIRM-BRFM 137. Accordingly, P. coccineus CIRM-BRFM 310 was selected to investigate the profile of expressed genes and secreted proteins in response to growth on deciduous (Populus grandidentata) and coniferous (Pinus halepensis) woods. The effect of the secretomes on the surface composition of cryo-milled wood and the analysis of the released saccharides showed that P. coccineus displays enzyme cocktails particularly well adapted to softwood conversion.
When cultivated on agar plates containing wood powder as the sole-carbon source, the P. coccineus monokaryotic strain CIRM-BRFM 310 was able to develop rapidly on hardwood (aspen). Softwood (pine) cultivation was not as fast, but the fungus was still able to grow (Fig. 1). The recent genome sequencing of P. coccineus CIRM-BRFM 310 revealed a 32.76-Mb genome with 12,690 predicted genes (to be discussed elsewhere). The genome was annotated using the JGI Annotation Pipeline and made available via the JGI fungal portal MycoCosm . The repertoire of genes coding for predicted CAZymes and AA enzymes in the genome of P. coccineus CIRM-BRFM 310 was very similar to that of other Polyporales (Additional file 1, Additional file 2: Table S1). In an attempt to elucidate the mechanisms that permit P. coccineus growth on both hardwood and softwood fibers, the strain was selected for an in-depth study combining transcriptomics, proteomics and functional characterization.
Transcripts related to lignocellulose degradation are enriched in wood grown cultures
Transcriptomes were sequenced from triplicated independent three day-cultures under three different sets of conditions: (1) in the presence of maltose as the sole-carbon source, (2) in the presence of ground pine wood as the sole-carbon source, and (3) in the presence of ground aspen wood as the sole-carbon source. For each condition, RNAseq data quality was verified by performing qPCR on a sample set of eight genes (Additional file 3: Figure S1). Expression levels were in good agreement with transcriptomic data. In total, transcriptomic analyses revealed 267 transcript sequences predicted to encode CAZymes, which were classified into 71 families of the CAZy database (http://www.cazy.org, ). When applying a fourfold increase in relative transcript abundance as the significance threshold, 114 (43 %) and 105 (39 %) unique sequences were considered significantly more abundant in the samples obtained from pine and aspen, respectively, as compared to maltose (at least fourfold enrichment). Notably, 92 transcripts (34 % of total transcripts) were upregulated on both pine and aspen, and were largely assigned to CAZy families known to encode lignocellulolytic activities. These included predicted cellulases from families GH5_5, GH12, GH45, GH74, GH131; cellobiohydrolases from families GH6 and GH7; β-glucosidases from GH1 and GH3, and LPMOs from family AA9. Of note, 11 AA9 Lytic Polysaccharide Monooxygenase (LPMO) transcripts, out of the 15 AA9 encoded by P. coccineus, were between 4 and 120 times more abundant in at least one of the wood conditions (Fig. 2; Additional file 2: Table S2).
GH families that comprise hemicellulolytic activities were also represented in this set of differentially expressed transcripts, including putative GH5_7 endo-mannanases, GH2 β-mannosidase and GH27 α-galactosidase, as well as GH10 endo-xylanases, GH43 and GH51 α-arabinofuranosidases, and GH115 α-glucuronidases. Of particular note, transcripts corresponding to all seven of the polygalacturonases from family GH28 identified in P. coccineus genome were more abundant in both pine and aspen cultivations than maltose, as were transcript levels corresponding to other genes predicted to be involved in pectin degradation, i.e. the two carbohydrate esterases (CE) of family CE8 genes and the only gene predicted to encode a GH53 β-galactosidase.
Annotation of AA2 gene models identified five putative MnP genes in the P. coccineus genome, among which four were identified in transcriptomes after cultivation on wood, and three were significantly more abundant in at least one of these cultivations (genes encoding predicted proteins 1464049, 1436321 and 1468611). By contrast, no candidate LiP transcripts from any of the six genes were detected. Hydrogen peroxide production is central to lignin degradation as it is required for peroxidase activity. Accordingly, transcriptomes from cultivations on pine and aspen were respectively enriched in six and five unique transcripts predicted to encode family AA3_2 glucose methanol choline (GMC) oxidoreductases. Transcripts from three family AA5_1 glyoxal oxidases were also enriched in both transcriptomes (Fig. 2). In fact, the most abundant transcripts in both samples from cultivations on wood encoded a predicted AA2 MnP (1468611) and a predicted AA3_3 alcohol oxidase (1368318), consistent with there being a major role for oxidoreductase activities in lignocellulose conversion by P. coccineus.
Overall, P. coccineus transcriptomes obtained following growth on aspen or pine comprised similar levels of transcripts predicted to encode lignocellulose degradation activities. However, growth on aspen uniquely led to the enrichment of two AA9 LPMO transcripts (1423642 and 1417214), one AA2 MnP (1464049) and three GH10 xylanases (1395316, 1426850 and 1419320), the latter being consistent with differences in hemicellulose compositions in the two substrates (Fig. 2; Additional file 2: Table S2). Conversely, growth on pine was distinguished by the enrichment of two alternative AA9 LPMO transcripts (793241 and 1466495), one GH3 β-glucosidase (1434274) and two AA3_4 H2O2-producing pyranose oxidases (1471985 and 1440372). Unexpectedly, however, none of the 14 transcripts significantly more abundant in P. coccineus after growth on pine as compared to aspen was predicted to directly target galactoglucomannan.
Pycnoporus coccineus displays similar sets of CAZymes upon growth on hardwood and softwood
LC–MS/MS was subsequently used to identify secreted CAZymes contributing most to the activities of secretomes extracted after cultivation on pine (referred to herein as PcoPine) or on aspen (referred to herein as PcoAspen) (Additional file 3: Figure S2). The secretome extracted from control cultivation on maltose (referred to herein as PcoMaltose) was also analyzed for comparison. A total of 115, 135 and 135 proteins were identified in PcoMaltose, PcoPine and PcoAspen, respectively (Additional file 2: Table S3, Additional file 4). Most of the detected proteins (84 %) were common to the two wood cultivations. Signal peptides were predicted for 89 % of identified proteins. PcoPine and PcoAspen contained 73 and 78 CAZymes, respectively, versus 54 CAZymes in PcoMaltose (Fig. 3). These CAZymes were broadly categorized as GH (39 in PcoMaltose, 60 in PcoPine and 62 in PcoAspen), AA (9, 8, 9), CE (CE) (3, 2, 5) and polysaccharide lyases (PL) (1, 1, 1) in PcoMaltose, PcoPine and PcoAspen, respectively.
Several CAZymes were identified in PcoPine and/or PcoAspen that were not detected in PcoMaltose (Table 1; Fig. 4). These included a total of 32 enzymes from CAZy families most often attributed to cellulose, hemicellulose, and pectin degradation, including GH families GH3, GH5_5, GH5_7, GH6, GH10, GH12, GH16, GH28, GH43 and GH45, as well as CE family CE1, and two AA9 LPMOs. Several AA families with activities attributed to lignin degradation, including enzymes from families AA2 and AA3, were also detected in the set of enzymes uniquely found in PcoPine and/or PcoAspen. Overall, the activities identified in the two wood conditions were globally similar, and the numbers of identified peptides suggested that most enzymes were produced in comparable amounts (Fig. 4). However, consistent with transcriptomic analyses, one AA2 MnP (1464049) was identified solely in PcoAspen, and one AA2 MnP (1436321) was only identified in PcoPine even though transcripts were identified in both cultivations on wood. Finally, whereas only one protein bearing a CBM1 module was detected in PcoMaltose, PcoPine and PcoAspen secretomes comprised 10 and 12 CBM1-containing CAZymes, respectively, which were largely attached to CAZy catalytic modules known to target cellulose: GH131 (1467772), GH3 (1404940), GH5_5 (1375024, 1429791 and 1434718), GH6 (1357326), or xylan: GH10 (1437837 and 1426850), and CE1 (1392142 and 1377173) (Table 1).
Other proteins potentially involved in biomass degradation
Cytochrome P450 monooxygenases can transform lignin fragments as well as aromatic extractives, and have been implicated in the detoxification of these compounds [23–25]. The P. coccineus genome comprises 205 genes predicted to encode P450 monooxygenases distributed among several P450 families. Among these, the transcripts of 86 P450 genes were identified in the P. coccineus transcriptomes collected herein, where 24 of them were more abundant (4–170 times) following cultivation on wood compared to maltose, and only 8 were differentially expressed between pine and aspen (Additional file 2: Table S4). Based on comparisons with curated fungal P450s (http://p450.riceblast.snu.ac.kr), these 24 P450 sequences largely grouped within clans 64 and 534 of P450 classification system [26, 27].
In addition, it is worth mentioning that both transcriptomic and proteomic analyses led to the identification of sequences of unknown or hypothetical functions. Transcriptomic data revealed an impressive number of gene models (2117) encoding proteins with unknown function (Additional file 2: Table S5). Among these, 455 and 414 transcript sequences were more than four times upregulated in pine and aspen cultivations, respectively. In particular, two sequences (1468135 and 1437297) were more than 500 times more abundant in both wood cultivations compared to the maltose reference. BlastP analysis revealed that sequence 1468135 is a putative hydrophobin (83 % identity with hydrophobin 2 from Trametes versicolor, EIW61059) and sequence 1437297 shared high homology with an osmotin thaumatin-like protein from Trametes versicolor (80 % identity, XP_008043489.1). Figure 5 summarizes transcripts encoding proteins with unknown function that encoded a signal peptide, differentially regulated in cultivations on wood, and for which proteins were identified in proteomic analyses. Notably, of the 48 proteins of unknown function identified in secretomes, 16 were uniquely identified in PcoPine and/or PcoAspen (Additional file 2: Table S6), and 15 corresponded to transcripts of unknown function that were enriched in at least one transcriptome from cultivation on wood (Additional file 2: Table S5).
Characterization of wood hydrolysates produced by PcoPine and PcoAspen
To compare the ability of PcoPine and PcoAspen to degrade aspen and pine wood, saccharification experiments were conducted. Wood fragments were incubated for 24 h with each secretome. The pine and aspen wood fragments used in this study contained 38.7 and 45.9 % glucose, 7. 6 and 16.9 % xylose, 9.0 and 1.8 % mannose, out of 65.1 and 69.9 % of total carbohydrates, respectively (Additional file 2: Table S7). DNS analyses revealed that PcoPine and PcoAspen were able to release comparable amounts of reducing sugars from pine and aspen, with PcoPine slightly but consistently more efficient over replicate experiments (Fig. 6). Surprisingly, both secretomes released significantly more reducing sugars from pine than from aspen. To check if this was due to the particular batches of wood that we utilized or to inherent properties of PcoPine and PcoAspen enzyme mixtures, we conducted a control experiment using Celluclast, a commercial enzyme mixture produced by T. reesei. As expected for a T. reesei cellulase cocktail, the Celluclast reference displayed the opposite pattern, with higher release of reducing sugars from aspen than pine (Fig. 6).
Reaction supernatants were further analyzed using ionic chromatography to identify the released sugars (Fig. 7). Consistent with DNS analyses, the amounts of glucose released by PcoAspen and PcoPine from pine were significantly higher than that released from aspen (Additional file 3: Figure S3). In addition to the main peak corresponding to glucose (retention time 4.56 min), chromatograms of reaction products released from both aspen and pine also contained several smaller peaks with retention times between 5 and 17 min which likely corresponded to oligomers of cellulose or hemicellulose (Fig. 7). Of note, the soluble sugars released by PcoPine from both aspen (Fig. 7a) and pine (Fig. 7b) included at least two unique peaks (retention time 6.43 and 10.50 min, respectively), which may have contributed to the slightly higher DNS values measured using PcoPine.
In addition to neutral sugars, both PcoAspen and PcoPine also released significant quantities of oxidized sugars from both substrates. Oxidized sugar standards were used to confirm that at least gluconic acid and cellobionic acid (C1-oxidized sugars) were among the oxidized products. A third peak with a retention time of 16.20 min was detected only in reactions with pine, and could represent an additional oxidized sugar product. In a recent study, Isaksen et al.  have shown that an LPMO of family AA9 from Neurospora crassa, (NcLPMO9c), was able to cleave oligosaccharides as small as G4 and release oxidized G2, meaning that LPMOs can process oligomers released by cellulases. Given the detection of AA9 revealed by proteomic analysis, the presence of several oxidized sugars identified through HPAEC analysis might indicate a similar mechanism.
Time-of-flight secondary ion mass spectrometry (ToF-SIMS) analysis of wood fiber residues
To gain further insight into the action of PcoPine and PcoAspen, residual pine and aspen wood were recovered following 24-h treatment with each secretome, and then analyzed by ToF-SIMS. ToF-SIMS is a mass spectrometry technique used to characterize the composition of sample surfaces, including relative occurrence of polysaccharides and lignin on wood fiber surfaces . Previously, the sensitivity of ToF-SIMS (as low as ppb) was harnessed to investigate the action of both carbohydrate and lignin-active enzymes directly on wood fibers [30, 31], and so was used herein to detect changes in biomass compositions resulting from the action of PcoPine and PcoAspen. Notably, as a surface analysis technique, ToF-SIMS could provide new insight into the mode of action of each secretome, assuming that corresponding activities would first target fiber surfaces.
Wood samples treated with buffer alone were also used as negative controls. Peaks corresponding to lignin and polysaccharides were extracted from ToF-SIMS spectra, and intensities between wood treatments were compared using principal component analysis (PCA). Analysis of lignin specific peaks showed a composition of lignin in pine and aspen samples characteristic of softwood and hardwood samples, respectively. Spectra from pine mainly included peaks at 137 and 151 Da [characteristic of guaiacyl lignin (G-lignin)] and spectra from aspen included additional peaks at 167 and 181 Da [characteristic of syringyl lignin (S lignin)]. A large peak at 121 Da [characteristic of p-hydroxyphenyl lignin (H-lignin)] was also detected in aspen samples. However, this peak has also been ascribed to p-hydroxybenzoic acid, which is present in poplar species . Accordingly, to minimize interferences from aromatic compounds not originating from lignin, the peak at 121 Da was discarded from subsequent PCA.
PCA of spectra generated from wood treated with PcoAspen and PcoPine confirmed that the major difference relative to control samples was the depletion of polysaccharide peaks in the treated samples, indicating that the main modification of both pine and aspen by either secretome resulted from the enzymatic hydrolysis of plant polysaccharides (Fig. 8). Closer inspection of PCA loadings for aspen samples (Fig. 8d) revealed that the intensity of certain polysaccharide peaks did not differ between enzyme-treated and control samples, including peaks at 127 and 145 Da, previously attributed to cellulose . By contrast, these peaks were depleted in enzyme-treated pine samples (Fig. 8b), consistent with more extensive degradation of cellulose as indicated by DNS and HPAEC analyses. This result would suggest that while both PcoPine and PcoAspen modified wood fiber surfaces, pine samples were more readily penetrated by both secretomes, leading to higher overall release of reducing sugars. PCA did not distinguish enzyme-treated and control samples based on lignin composition. This result suggests that lignin modifications by PcoPine and PcoAspen were minor in our experimental conditions, and would have had minimal impact on overall changes to polysaccharide composition.
The ability of the white-rot fungus Pycnoporus coccineus CIRM-BRFM310 to grow on both softwood and hardwood motivated the analysis of the enzyme combinations that could be used to improve processing of coniferous wood and hardwood feedstocks.
Our transcriptomic and secretomic analyses of P. coccineus in response to woody substrates identified the most highly expressed genes coding for secreted enzymes at early stages of fungal growth on wood. The distribution of CAZy families present in PcoAspen and PcoPine secretomes confirmed the typical white-rot behavior of P. coccineus . Notably, many glycoside hydrolase families present in PcoAspen and PcoPine secretomes were also identified in the secretomes of other Agaricomycotina cultivated on the same aspen source . In particular, enzymes belonging to families GH3 and GH5 were identified in the secretomes of all the Agaricomycotina compared in this earlier study. Similar to our findings, CBM1 was the most frequently represented carbohydrate-binding module, which was similarly fused to glycoside hydrolase families predicted to target cellulose and xylan (i.e. families GH5, GH6, GH10, GH11 and AA9) . In our study, both PcoAspen and PcoPine comprised 12 CBM1-containing enzymes among which one GH6, three GH7s, and two AA2 peroxidases, representing typical activities required for both cellulose and lignin depolymerization. Family AA9 LPMOs are also produced by typical white-rot degraders  and have been shown to dramatically improve cellulase performance . Characteristically then, transcriptomic analysis of P. coccineus following growth on aspen or pine confirmed the expression of 15 AA9 genes, in addition to the one AA9 and two AA9s for which corresponding proteins were detected in PcoPine and PcoAspen, respectively, confirming the potential role of LPMO in wood conversion.
Notably, the most upregulated transcript corresponded to a predicted H2O2-producing alcohol oxidase (1368318; CAZY family AA3_3). Alcohol oxidase enzymes are flavoproteins from the glucose–methanol–choline (GMC) oxidoreductases family . Alcohol oxidases can use the methanol potentially produced during lignin attack (demethoxylation) to produce H2O2 and have so far been mainly associated to hydroxyl radical generation in Fenton reactions induced by brown-rot wood decay fungi [15, 37]. Genes coding for predicted alcohol oxidases have been found in the genome of white-rot fungi  and high levels of transcription for alcohol oxidases upon growth on wood have been highlighted in the white-rotter P. chrysosporium . This suggests a major role for H2O2 producing enzymes which support both the action of peroxidases and the Fenton reaction, and will warrant further investigation.
Pycnoporus coccineus has previously been studied for its ability to secrete laccases (CAZy family AA1_1; 20). The monokaryotic strain CIRM-BRFM 310 used in this study was obtained in vitro from a basidiospore of the parental strain CIRM-BRFM 66 (IMB W006-2) which was first identified as a high producer of laccase . After expert annotation of the AA1 CAZy family, we identified five gene models coding for predicted laccases (Additional file 2: Table S8). Our results show that three laccase genes are transcribed in CIRM-BRFM 310 during growth on maltose (1366139, 1452465 and 1477425). In our conditions, 1452465 shows constitutive transcription on pine and aspen and is found in the secretome of the fungus grown on these substrates. On the contrary, 1366139 and 1477425 are the most abundantly transcribed on maltose and are downregulated after 3-day growth on pine and aspen (Additional file 2: Table S8). These results show that, although two laccases are detected in the secretomes of the fungus grown on pine and aspen, low transcript levels are observed on these substrates, suggesting that laccases are rather downregulated during the early response of this fungus to woody biomass.
Although the overall profile of CAZymes obtained through transcriptome and secretome sequencing revealed similar sets of enzymes released after cultivating P. coccineus on aspen and pine, some notable differences were observed. In particular, transcripts encoding xylanases were more abundant following cultivation on aspen, and several distinct AA9 transcripts were enriched following growth on either aspen or pine. Nevertheless, these differences did not lead to detectable impact on saccharification results: release of total reducing sugars, profiles of neutral oligomers and oxidized sugars, and modifications of wood fiber surfaces. Perhaps more remarkable, both PcoPine and PcoAspen released more total sugars from pine preparations compared to aspen. This observation underscores the additional insight gained through characterizing both soluble and insoluble products from saccharification assays, and suggests that a core set of enzymes present in both PcoPine and PcoAspen penetrated pine particles more readily than aspen.
In general, wood fiber from hardwood species is more readily biologically transformed compared to coniferous softwood . This has been attributed in part to higher lignin content, larger amounts of extractive components, and smaller pore size in softwood [40, 41]. Nevertheless, some white-rot fungi such as D. squalens , P. carnosa  and P. gigantea  have developed the ability to grow efficiently on softwood. Related studies have highlighted specific patterns in terms of gene content, gene expression and proteins secreted to tackle softwood substrates. For instance, pectin degradation has been previously correlated to efficient softwood decay; particularly through the solubilization of pectin-rich pit membranes which thereby promotes access to other lignocellulose components and penetration through adjacent tracheids . In this context, it is interesting to note that the genomes of the conifer-adapted fungi P. gigantea and Heterobasidion annosum encode higher numbers of GH28 and CE8 pectinolytic enzymes compared to other Polyporales sequenced to date . Higher expression of GH28 genes upon growth on softwood (especially pine) versus hardwood has been observed for P. carnosa . Similar observations were made for the brown-rot fungus P. placenta , in which one GH28 polygalacturonase and one GH28 rhamnogalacturonase were enriched following growth on pine as opposed to aspen. In the current study, all seven genes predicted to encode GH28 polygalacturonases and the two genes predicted to encode CE8 pectin methylesterases were significantly enriched in P. coccineus CIRM-BRFM310 transcriptomes following growth on both aspen and pine (4–55 times more abundant than in the maltose condition). Involvement of cytochrome P450 monooxygenases in wood degradation and specifically in the transformation of softwood lignin and extractives has been previously discussed [23, 25]. For instance, 15 P450 monooxygenase genes were enriched upon growth on pine as compared to growth on aspen in the softwood-adapted brown-rot fungus P. placenta . Similarly, the comparison of P. chrysosporium and P. carnosa genomes has revealed a particularly large number of P450 sequences in the softwood degrader P. carnosa. In this study, transcript levels of P450 sequences belonging to clans 64 and 534 were enriched upon growth on both aspen and pine. It is interesting to note that these clans were also among the most expanded clans in P. carnosa P450ome as compared to P. chrysosporium . Preferential expression of MnPs over LiPs has also been correlated to growth on coniferous wood. Examples include D. squalens, whose genome encodes nine MnP and no LiP , and P. carnosa  in which seven MnP and only four LiP genes have been identified. Accordingly, of the four MnPs and four LiPs encoded by the P. coccineus genome (Additional file 2: Table S9), three MnP genes were significantly expressed upon growth on both aspen and pine, whereas transcripts corresponding to LiP genes were not identified. It is conceivable that Mn3+ chelates that mediate MnP activity can diffuse readily through the particularly dense G-lignin structures of plant cell walls, as suggested in Ref. . However, this hypothesis will require further studies to compare the precise activity of MnP and LiPs on G and S lignin subunits.
In summary, the current study revealed that while P. coccineus growth on hardwood is common in nature, this fungus also contains the enzymatic arsenal appropriate for efficient conversion of softwood. Several parameters such as expression of pectinolytic enzymes, P450 monooxygenases and manganese peroxidases have all been noticed in earlier studies and might be critical to the ability of some fungi to degrade coniferous wood. Certainly, biochemical characterization of isolated enzymes and defined enzyme mixtures, along with additional post-genomic investigations over the Polyporales order, will help to clarify these correlations.
This study reveals the surprising potential of the white-rot fungus P. coccineus for softwood degradation. The extensive analysis that was performed here combined genomic, transcriptomic and proteomic analyses with the assessment of enzyme activity on biomass, and revealed a full set of carbohydrate- and lignin-active enzymes produced upon cultivation on wood. The capability of P. coccineus for softwood deconstruction might be explained by several parameters such as peroxidase content and fiber penetration. Because of its ability, P. coccineus is a promising model to better understand the challenges of softwood biomass deconstruction and its use in biorefinery processes.
Fungal strain and enzymes
Pycnoporus coccineus CIRM-BRFM310 was obtained from the CIRM collection (Centre International de Ressources Microbiennes, https://www6.inra.fr/cirm_eng/Filamentous-Fungi) at the National Institute of Agricultural Research. Novozymes Celluclast 1.5L cocktail was purchased from Sigma-Aldrich (St-Louis, USA).
Pycnoporus coccineus culture conditions and secretome preparation
Pycnoporus coccineus CIRM-BRFM 310 was grown on plates containing 15 g l−1 agar, YNB 1.7 g l−1, diammonium tartrate 1.84 g l−1 and either 20 g l−1 maltose or 15 g l−1 of non-pretreated and non-extracted wood powder. Plates were inoculated with a disk of a previous culture and incubated for 6 weeks at 30 °C. For RNA extractions from liquid cultures, inocula were prepared from 10-day-old non-agitated precultures as described in Ref. . P. coccineus CIRM-BRFM 310 was grown for 3 days at 30 °C in a rotary shaker at 120 rpm in 250-ml Erlenmeyer flasks containing 100 ml of diammonium tartrate (1.84 g l−1); KH2PO4 (0.2 g l−1); CaCl2 (0.01 g l−1); MgSO4·7H2O (0.5 g l−1); Fe-SO4·7H2O (0.074 g l−1); ZnSO4·7H2O (0.077 g l−1); MnSO4·H2O (0.035 g l−1); CuSO4·5H2O (0.007 g l−1); yeast extract (0.5 g l−1); thiamin (0.002 g l−1); maltose (2.5 g l−1) in addition with ground and sifted pine wood fragments <2 mm (15 g l−1) or 1 mm Wiley-milled aspen (15 g l−1). Pine (Pinus halepensis) was obtained from Provence Forêt (Peyrolles en Provence, France) and consisted of air dried pine particles that contained all parts of the trunk including bark. Wiley-milled aspen (Populus grandidentata) was kindly provided by Dan Cullen (Forest Product Laboratory, USDA, Madison, WI, USA). Both pine and aspen powders were raw, unextracted samples, and no pretreatment other than grinding was applied. For controls, the fungus was grown in the same medium with maltose (20 g l−1) as a carbon source. Each culture was performed in triplicate. Following the 3-day cultivation, culture supernatants containing secreted protein were harvested, filtered using a 0.2-µm pore-size polyethersulfone membrane (Vivaspin; Sartorius, Germany), diafiltered with 50 mM sodium acetate (pH 5.0) and concentrated using a Vivaspin polyethersulfone membrane with a 10-kDa cutoff (Sartorius). Concentrated samples were then stored at −20 °C until use. Mycelium and remaining substrate were immediately frozen in liquid nitrogen and stored at −80 °C before RNA extraction.
RNA-seq and subsequent data analysis
Total RNA was extracted from 100 mg tissue ground with FastPrep Lysis Matrix A (MP Biomedicals) in 1 ml TRIZOL (Ambion). Nucleic acids were precipitated with isopropanol, resuspended in water and treated with RNase-free DNase I (QIAGEN). Total RNA was precipitated with LiCl and resuspended in DEPC-treated water. RNA quantity and quality were determined using the Experion RNA StdSens kit (QIAGEN). Double-stranded cDNAs were synthesized from Poly A RNA and fragmented (200–300 bp) before construction of the sequencing libraries (Kapa Library Amplification Kit; Kapa Biosystems). Sequencing was done on the Illumina HighSeq-2500 JGI platform generating paired end reads of 150 bp each. Raw fastq file reads were filtered and trimmed using the JGI QC pipeline. The reads obtained from each replicate; read counts and normalized read counts are available on GEO  under accession number GSE74234. QCed reads from each library were aligned to the reference genome Pycnoporus coccineus BRFM 310 v1.0 using TopHat  with only unique mapping allowed. Read counts were determined by HTSeq (Galaxy Tool Version 0.3.2). Correlation between biological replicates was evaluated using Pearson’s correlation (Additional file 2: Table S10, Table S11). Differential gene expression was analyzed on R using DESeq2 package (version 1.5) . Gene models for which the mean raw read counts were inferior to five were considered as not transcribed and their read counts were changed to zero. Read counts were normalized using ddsNorm from the DESeq Bioconductor package. This normalization method is based on the hypothesis that most genes are not differentially expressed and should have similar read counts across samples . DESeq2 was used to determine differential expression between pairs of conditions. The parameters used to call a gene differentially expressed between conditions were p value Bonferroni <0.05 and p value Benjamini–Hochberg <0.05.
Reverse transcription was carried out using the iScript Reverse Transcription Supermix following the instructions of the manufacturer (Bio-Rad Laboratories, Marnes la Coquette, France). The primers for qPCR were determined using Primer3Plus (http://www.bioinformatics.nl/cgi-bin/primer3plus/primer3plus.cgi) and synthesized by Eurofins (Nantes, France) (Additional file 2: Table S12). The cDNA was diluted 50 times, and 2 µl was used per PCR, with 4 µl of Sso advanced SYBR Green Supermix (Bio-Rad Laboratories) and 0.3 µl each of 10 µM forward and reverse primers. Volume was adjusted to 20 µl with water. Thermocycling was carried out with one cycle at 95 °C for 30 s, followed by 40 cycles of 95 °C for 5 s and 57 °C for 5 s.
Characterization of secretomes using LC–MS/MS
LC–MS/MS analysis of P. coccineus secretomes, PcoAspen, PcoPine and PcoMaltose, was performed as described in Ref. . Briefly, short SDS-PAGE runs (pre-casted Bis–Tris Mini Gels, Invitrogen, France) were performed, allowing 10 µg of proteins diafiltered from secretomes to migrate on 0.5 cm length. Each one-dimensional electrophoresis lane was cut into two slices of gel and protein identification was performed using PAPPSO “Plate-forme d’Analyse Protéomique de Paris Sud-Ouest” platform facilities. In-gel digestion was carried out according to a standard trypsinolysis protocol. Online analysis of peptides was performed with a Q-exactive mass spectrometer (Thermo Fisher Scientific, USA), using a nanoelectrospray ion source. Protein identification was performed by querying MS/MS data against the Pycnoporus coccineus genome (http://genome.jgi.doe.org/Pycco1/Pycco1.home.html), together with an in-house contaminant database, using the X!Tandem software (X!Tandem Cyclone, Jouy en Josas, France). All peptides matched with an E value lower than 0.05 were parsed with X!Tandem pipeline software. Proteins identified with at least two unique peptides and a log (E value) lower than −2.6 were validated.
Preparation of wood powders for activity assays
For activity measurement, the two wood samples (ground and sifted pine wood fragments and Wiley-milled aspen) were further ground separately using a cryomill to particles of roughly 100 μm (milled powders passed through a US mesh size 100 sieve, 0.150 mm diameter). Extraction on wood powders was done following the ASTM standard D1105. Briefly, samples were Soxhlet extracted in a mixture of ethanol:toluene (1:0.427 v/v) for 4 h, followed by ethanol for 8 h. The extractive-free samples were then oven-dried at 50 °C for one night and stored at room temperature until use. No other pretreatment was applied.
Saccharification assay and soluble sugar analysis
The extractive-free wood powders described above were suspended [4 % (w/v)] in 50 mM acetate buffer (pH 5.0), and 100 µl samples were transferred to each well in 96-well microplates. Reactions were initiated by adding 6 µg of a fungal secretome or 6 µg of Celluclast to reach a final protein concentration of 30 mg ml−1. The final reaction volume was adjusted to 200 µl using 50 mM acetate buffer (pH5) to reach 2 % final suspension. Reaction mixtures were incubated at 40 °C for 24 h with intermittent shaking (5 min off, 20 s on cycles) at 1000 rpm in a Thermomixer incubator (Eppendorf Canada, Mississauga, Ontario). Reaction mixtures were then processed using a filtration plate (Millipore MultiScreen Barex/TiO2 plates) as previously described . The dinitrosalicylic (DNS) assay for reducing sugar analysis was carried out with reaction supernatants using a Tecan liquid handler (Freedom Evo100, Tecan, Männedorf, Switzerland) and the automatized method described previously . Reducing sugars were expressed in μmol of sugars released per mg of dry matter.
HPAEC analysis of reducing sugars
After saccharification, soluble sugar profiles were analyzed using high-performance anion-exchange chromatography (HPAEC) coupled with pulsed amperometric detection (PAD) (ICS 3000; Dionex, Sunnyvale, USA) equipped with a carboPac PA-1 analytical column (250 × 2 mm) and guard column. Samples and standards were injected into the HPAEC system and elution was carried out using a multi-step gradient following the protocol described in Ref. . Briefly, the eluents were 0.1 M NaOH (eluent A) and 1 M NaOAc in 0.1 M NaOH (eluent B). Elution was performed at a constant flow rate of 0.25 ml/min at room temperature, using a linear gradient of 0–10 % eluent B over 10 min, 10–30 % eluent B over 25 min, and an exponential gradient of 30–100 % eluent B in 5 min. The initial condition (100 % eluent A) was then restored in 1 min and maintained for 9 min to recondition the column.
Time-of-flight secondary ion mass spectrometry
Time-of-flight secondary ion mass spectrometry measurements were made on extractive-free wood powders prepared as described above with a ToF-SIMS IV instrument (Ion-Tof Gmbh, Münster, Germany) equipped with a bismuth liquid metal ion source and reflectron-type analyzer with multichannel detector. Eight to ten spectra were acquired to ensure adequate sampling, using 50 keV Bi3 2+ primary ions (~0.3 pA pulsed current) incident at 45°, operated on 100 μs cycle time with high-current bunched conditions. Spectra were acquired for 60–120 s using 128 × 128 pixel random raster pattern covering a 500 × 500 μm2 area. Ion doses were kept below 1 × 1012 ions/cm2 to limit sample damage. The pressure during analysis was maintained between 1 × 10−8 and 1 × 10−7 mbar. Low-energy electron flooding (20 eV) was used to reduce sample charging. Positive ion spectra were calibrated to C+, CH+, CH2+, CH3 +, C2H3 + and C3H5 + ions using SurfaceLab v.6.1 software. Mass resolution (M/ΔM) varied depending on sample roughness and all ToF-SIMS data were binned to 1 Da before calculating peak ratios or applying statistical analysis.
Principal component analysis
Principal component analysis (PCA) was performed using Matlab software v.184.108.40.2069 R2012a (The Mathworks, Inc.) with PLS Toolbox v.6.7.1 (Eigenvector Research Inc.). Individual ToF-SIMS spectra from replicate locations on the wood powder residues were preprocessed as follows: (i) the peak intensities were normalized to the total ion intensity of the peak list to eliminate the influence of overall intensity changes that might arise from topography or variations in instrumental setup; (ii) data at each mass were mean centered so that all principal components (PCs) described variations from the data set mean.
- G lignin:
glucose methanol choline
- H lignin:
high-pressure anion-exchange chromatography with pulsed amperometric detection
lytic polysaccharide monooxygenase
principal component analysis
- S lignin:
time-of-flight secondary ion mass spectrometry
Martinez D, Larrondo LF, Putnam N, Gelpke MD, Huang K, Chapman J, Helfenbein KG, Ramaiya P, Detter JC, Larimer F, Coutinho PM, Henrissat B, Berka R, Cullen D, Rokhsar D. Genome sequence of the lignocellulose degrading fungus Phanerochaete chrysosporium strain RP78. Nat Biotechnol. 2004;22(6):695–700.
Westereng B, Ishida T, Vaaje-Kolstad G, Wu M, Eijsink VG, Igarashi K, Samejima M, Ståhlberg J, Horn SJ, Sandgren M. The putative endoglucanase PcGH61D from Phanerochaete chrysosporium is a metal-dependent oxidative enzyme that cleaves cellulose. PLoS One. 2011;6(11):e27807.
Ravalason H, Jan G, Mollé D, Pasco M, Coutinho PM, Lapierre C, Pollet B, Bertaud F, Petit-Conil M, Grisel S, Sigoillot JC, Asther M, Herpoël-Gimbert I. Secretome analysis of Phanerochaete chrysosporium strain CIRM-BRFM41 grown on softwood. Appl Microbiol Biotechnol. 2008;80(4):719–33.
Macdonald J, Master ER. Time-dependent profiles of transcripts encoding lignocellulose-modifying enzymes of the white rot fungus Phanerochaete carnosa grown on multiple wood substrates. Appl Environ Microbiol. 2012;78(5):1596–600.
Mahajan S, Jeremic D, Goacher RE, Master ER. Mode of coniferous wood decay by the white rot fungus Phanerochaete carnosa as elucidated by FTIR and ToF-SIMS. Appl Microbiol Biotechnol. 2012;94(5):1303–11.
Suzuki H, MacDonald J, Syed K, Salamov A, Hori C, Aerts A, Henrissat B, Wiebenga A, VanKuyk PA, Barry K, Lindquist E, LaButti K, Lapidus A, Lucas S, Coutinho P, Gong Y, Samejima M, Mahadevan R, Abou-Zaid M, de Vries. RP, Igarashi K, Yadav JS, Grigoriev IV, Master ER. Comparative genomics of the white-rot fungi, Phanerochaete carnosa and P. chrysosporium, to elucidate the genetic basis of the distinct wood types they colonize. BMC Genom. 2012;13:444.
Salvachúa D, Martínez AT, Tien M, López-Lucendo MF, García F, de Los Ríos V, Martínez MJ, Prieto A. Differential proteomic analysis of the secretome of Irpex lacteus and other white-rot fungi during wheat straw pretreatment. Biotechnol Biofuels. 2013;6(1):115.
Fernandez-Fueyo E, Ruiz-Dueñas FJ, Ferreira P, Floudas D, Hibbett DS, Canessa P, Larrondo LF, James TY, Seelenfreund D, Lobos S, Polanco R, Tello M, Honda Y, Watanabe T, Watanabe T, San Ryu J, Kubicek CP, Schmoll M, Gaskell J, Hammel KE, St. John FJ, Van den Wymelenberg A, Sabat G, BonDurant SS, Syed K, Yadav JS, Doddapaneni H, Subramanian V, Lavín JL, Oguiza JA, Perez G, Pisabarro AG, Ramirez L, Santoyo F, Master ER, Coutinho PM, Henrissat B, Lombard V, Magnuson JK, Kües U, Hori C, Igarashi K, Samejima M, Held BW, Barry KW, LaButti KM, Lapidus A, Lindquist EA, Lucas SM, Riley R, Salamov AA, Hoffmeister D, Schwenk D, Hadar Y, Yarden O, de Vries RP, Wiebenga A, Stenlid J, Eastwood D, Grigoriev IV, Berka RM, Blanchette RA, Kersten P, Martinez AT, Vicuna R, Cullen D. Comparative genomics of Ceriporiopsis subvermispora and Phanerochaete chrysosporium provide insight into selective ligninolysis. Proc Natl Acad Sci USA. 2012;109(14):5458–63.
Hori C, Gaskell J, Igarashi K, Kersten P, Mozuch M, Samejima M, Cullen D. Temporal alterations in the secretome of the selective ligninolytic fungus Ceriporiopsis subvermispora during growth on aspen wood reveal this organism’s strategy for degrading lignocellulose. Appl Environ Microbiol. 2014;80(7):2062–70.
Hori C, Ishida T, Igarashi K, Samejima M, Suzuki H, Master E, Ferreira P, Ruiz-Dueñas FJ, Held B, Canessa P, Larrondo LF, Schmoll M, Druzhinina IS, Kubicek CP, Gaskell JA, Kersten P, St John F, Glasner J, Sabat G, Splinter BonDurant S, Syed K, Yadav J, Mgbeahuruike AC, Kovalchuk A, Asiegbu FO, Lackner G, Hoffmeister D, Rencoret J, Gutiérrez A, Sun H, Lindquist E, Barry K, Riley R, Grigoriev IV, Henrissat B, Kües U, Berka RM, Martínez AT, Covert SF, Blanchette RA, Cullen D. Analysis of the Phlebiopsis gigantea genome, transcriptome and secretome provides insight into its pioneer colonization strategies of wood. PLoS Genet. 2014;10(12):e1004759.
Rytioja J, Hildén K, Hatakka A, Mäkelä MR. Transcriptional analysis of selected cellulose-acting enzymes encoding genes of the white-rot fungus Dichomitus squalens on spruce wood and microcrystalline cellulose. Fungal Genet Biol. 2014;72:91–8.
Ohm RA, Riley R, Salamov A, Min B, Choi IG, Grigoriev IV. Genomics of wood-degrading fungi. Fungal Genet Biol. 2014;72:82–90.
Hori C, Gaskell J, Igarashi K, Samejima M, Hibbett D, Henrissat B, Cullen D. Genomewide analysis of polysaccharides degrading enzymes in 11 white- and brown-rot Polyporales provides insight into mechanisms of wood decay. Mycologia. 2013;105(6):1412–27.
Riley R, Salamov AA, Brown DW, Nagy LG, Floudas D, Held BW, Levasseur A, Lombard V, Morin E, Otillar R, Lindquist EA, Sun H, LaButti KM, Schmutz J, Jabbour D, Luo H, Baker SE, Pisabarro AG, Walton JD, Blanchette RA, Henrissat B, Martin F, Cullen D, Hibbett DS, Grigoriev IV. Extensive sampling of basidiomycete genomes demonstrates inadequacy of the white-rot/brown-rot paradigm for wood decay fungi. Proc Natl Acad Sci USA. 2014;111(27):9923–8.
Wymelenberg AV, Gaskell J, Mozuch M, BonDurant SS, Sabat G, Ralph J, Skyba O, Mansfield SD, Blanchette RA, Grigoriev IV, Kersten PJ, Cullen D. Significant alteration of gene expression in wood decay fungi Postia placenta and Phanerochaete chrysosporium by plant species. Appl Environ Microbiol. 2011;77(13):4499–507.
Gaskell J, Marty A, Mozuch M, Kersten PJ, Splinter BonDurant S, Sabat G, Azarpira A, Ralph J, Skyba O, Mansfield SD, Blanchette RA, Cullen. Influence of Populus genotype on gene expression by the wood decay fungus Phanerochaete chrysosporium. Appl Environ Microbiol. 2014;80(18):5828–35.
Timell TE. Recent progress in the chemistry of wood hemicelluloses. Wood Sci Technol. 1967;1(1):45–70.
Fengel D, Wegener G. Wood: chemistry, ultrastructure, reactions. Berlin: W. de Gruyter; 1989.
Levasseur A, Lomascolo A, Chabrol O, Ruiz-Dueñas FJ, Boukhris-Uzan E, Piumi F, Kües U, Ram AF, Murat C, Haon M, Benoit I, Arfi Y, Chevret D, Drula E, Kwon MJ, Gouret P, Lesage-Meessen L, Lombard V, Mariette J, Noirot C, Park J, Patyshakuliyeva A, Sigoillot JC, Wiebenga A, Wösten HA, Martin F, Coutinho PM, de Vries RP, Martínez AT, Klopp C, Pontarotti P, Henrissat B, Record E. The genome of the white-rot fungus Pycnoporus cinnabarinus: a basidiomycete model with a versatile arsenal for lignocellulosic biomass breakdown. BMC Genom. 2014;15(1):486.
Lomascolo A, Uzan-Boukhris E, Herpoël-Gimbert I, Sigoillot JC, Lesage-Meessen L. Peculiarities of Pycnoporus species for applications in biotechnology. Appl Microbiol Biotechnol. 2011;92(6):1129–49.
Grigoriev IV, Nikitin R, Haridas S, Kuo A, Ohm R, Otillar R, Riley R, Salamov A, Zhao X, Korzeniewski F, Smirnova T, Nordberg H, Dubchak I, Shabalov I. MycoCosm portal: gearing up for 1000 fungal genomes. Nucleic Acids Res. 2014;42:D699–704.
Lombard V, Ramulu HG, Drula E, Coutinho PM, Henrissat B. The Carbohydrate-active enzymes database (CAZy) in 2013. Nucleic Acids Res. 2014;42:D490–5.
Doddapaneni H, Chakraborty R, Yadav JS. Genome-wide structural and evolutionary analysis of the P450 monooxygenase genes (P450ome) in the white rot fungus Phanerochaete chrysosporium: evidence for gene duplications and extensive gene clustering. BMC Genom. 2005;6:92.
Syed K, Yadav JS. P450 monooxygenases (P450ome) of the model white rot fungus Phanerochaete chrysosporium. Crit Rev Microbiol. 2012;38(4):339–63.
Morel M, Meux E, Mathieu Y, Thuillier A, Chibani K, Harvengt L, Jacquot JP, Gelhaye E. Xenomic networks variability and adaptation traits in wood decaying fungi. Microb Biotechnol. 2013;6(3):248–63.
Nelson DR. The cytochrome P450 homepage. Hum Genomics. 2009;4:59–65.
Chen W, Lee MK, Jefcoate C, Kim SC, Chen F, Yu JH. Fungal Cytochrome P450 Monooxygenases: their distribution, structure, functions, family expansion, and evolutionary origin. Genome Biol Evol. 2014;7:1620–34.
Isaksen T, Westereng B, Aachmann FL, Agger JW, Kracher D, Kittl R, Ludwig R, Haltrich D, Eijsink VG, Horn SJ. A C4-oxidizing lytic polysaccharide monooxygenase cleaving both cellulose and cello-oligosaccharides. J Biol Chem. 2014;289(5):2632–42.
Goacher RE, Jeremic D, Master ER. Expanding the library of secondary ions that distinguish lignin and polysaccharides in time-of-flight secondary ion mass spectrometry analysis of wood. Anal Chem. 2011;83(3):804–12.
Goacher RE, Edwards EA, Mims CA, Master ER. Application of ToF-SIMS for the detection of enzyme activity on solid wood substrates. Anal Chem. 2012;84(10):4443–52.
Goacher RE, Tsai AL, Master ER. Towards practical time-of-flight secondary ion mass spectrometry lignocellulolytic enzyme assays. Biotechnol Biofuels. 2013;6(1):132.
Zhou C, Li Q, Chiang V, Lucia LA, Griffis DP. Chemical and spatial differentiation of syringyl and guaiacyl lignins in poplar wood via time-of-flight secondary ion mass spectrometry. Anal Chem. 2011;83(18):7020–6.
Saito K, Watanabe Y, Shirakawa M, Matsushita Y, Imai T, Koike T, Sano Y, Funada R, Fukazawa K, Fukushima K. Direct mapping of morphological distribution of syringyl and guaiacyl lignin in the xylem of maple by time-of-flight secondary ion mass spectrometry. Plant J. 2012;69:542–52.
Floudas D, Binder M, Riley R, Barry K, Blanchette RA, Henrissat B, Martínez AT, Otillar R, Spatafora JW, Yadav JS, Aerts A, Benoit I, Boyd A, Carlson A, Copeland A, Coutinho PM, de Vries RP, Ferreira P, Findley K, Foster B, Gaskell J, Glotzer D, Górecki P, Heitman J, Hesse C, Hori C, Igarashi K, Jurgens JA, Kallen N, Kersten P, Kohler A, Kües U, Kumar TK, Kuo A, LaButti K, Larrondo LF, Lindquist E, Ling A, Lombard V, Lucas S, Lundell T, Martin R, McLaughlin DJ, Morgenstern I, Morin E, Murat C, Nagy LG, Nolan M, Ohm RA, Patyshakuliyeva A, Rokas A, Ruiz-Dueñas FJ, Sabat G, Salamov A, Samejima M, Schmutz J, Slot JC, St John F, Stenlid J, Sun H, Sun S, Syed K, Tsang A, Wiebenga A, Young D, Pisabarro A, Eastwood DC, Martin F, Cullen D, Grigoriev IV, Hibbett DS. The Paleozoic origin of enzymatic lignin decomposition reconstructed from 31 fungal genomes. Science. 2012;336(6089):1715–9.
Harris PV, Welner D, McFarland KC, Re E, Navarro Poulsen JC, Brown K, Salbo R, Ding H, Vlasenko E, Merino S, Xu F, Cherry J, Larsen S, Leggio LL. Stimulation of lignocellulosic biomass hydrolysis by proteins of glycoside hydrolase family 61: structure and function of a large, enigmatic family. Biochemistry. 2010;49(15):3305–16.
Cavener DR. GMC oxidoreductases—a newly defined family of homologous proteins with diverse catalytic activities. J Mol Biol. 1992;223:811–4.
Daniel G, Volc J, Filonova L, Plihal O, Kubátová E, Halada P. Characteristics of Gloeophyllum trabeum alcohol oxidase, an extracellular source of H2O2 in brown rot decay of wood. Appl Environ Microbiol. 2007;73:6241–53.
Uzan E, Nousiainen P, Balland V, Sipila J, Piumi F, Navarro D, Asther M, Record E, Lomascolo A. High redox potential laccases from the ligninolytic fungi Pycnoporus coccineus and Pycnoporus sanguineus suitable for white biotechnology: from gene cloning to enzyme characterization and applications. J Appl Microbiol. 2010;108(6):2199–213.
Zhu JY, Pan XJ. Woody biomass pretreatment for cellulosic ethanol production: technology and energy consumption evaluation. Bioresour Technol. 2010;101:4992–5002.
Ramos LP, Breuil C, Saddler JN. Comparison of steam pretreatment of eucalyptus, aspen and spruce wood chips and their enzymatic hydrolysis. Appl Biochem Biotechnol. 1992;34–35(1):37–48.
Mooney CA, Mansfield SD, Tuohy MG, Saddler JN. The effect of initial pore volume and lignin content on the enzymatic hydrolysis of softwoods. Bioresour Technol. 1998;64(2):113–9.
Green F, Kuster TA, Highley TL. Pectin degradation during colonization of wood by brown-rot fungi. Recent Res Devel in Plant Pathol. 1996;1:83–93.
MacDonald J, Doering M, Canam T, Gong Y, Guttman DS, Campbell MM, Master ER. Transcriptomic responses of the softwood-degrading white-rot fungus Phanerochaete carnosa during growth on coniferous and deciduous wood. Appl Environ Microbiol. 2011;77(10):3211–8.
Ruiz-Dueñas FJ, Lundell T, Floudas D, Nagy LG, Barrasa JM, Hibbett DS, Martínez AT. Lignin-degrading peroxidases in Polyporales: an evolutionary survey based on 10 sequenced genomes. Mycologia. 2013;105(6):1428–44.
Herpoël I, Moukha S, Lesage-Meessen L, Sigoillot J, Asther M. Selection of Pycnoporus cinnabarinus strains for laccase production. FEMS Microbiol Lett. 2000;183(2):301–6.
Barrett T, Wilhite SE, Ledoux P, Evangelista C, Kim IF, Tomashevsky M, Marshall KA, Phillippy KH, Sherman PM, Holko M, Yefanov A, Lee H, Zhang N, Robertson CL, Serova N, Davis S, Soboleva A. NCBI GEO: archive for functional genomics data sets—update. Nucleic Acids Res. 2013;41:D991–5.
Kim D, Pertea G, Trapnell C, Pimentel H, Kelley R, Salzberg SL. TopHat2: accurate alignment of transcriptomes in the presence of insertions, deletions and gene fusions. Genome Biol. 2013;14(4):R36.
Love MI, Huber W, Anders S. Moderated estimation of fold change and dispersion for RNA-seq data with DESeq2. Genome Biol. 2014;15:550.
Dillies MA, Rau A, Aubert J, Hennequet-Antier C, Jeanmougin M, Servant N, Keime C, Marot G, Castel D, Estelle J, Guernec G, Jagla B, Jouneau L, Laloë D, Le Gall C, Schaëffer B, Le Crom S, Guedj M, Jaffrézic F, French StatOmique Consortium. A comprehensive evaluation of normalization methods for Illumina high-throughput RNA sequencing data analysis. Brief Bioinform. 2013;14(6):671–83.
Navarro D, Rosso MN, Haon M, Olivé C, Bonnin E, Lesage-Meessen L, Chevret D, Coutinho PM, Henrissat B, Berrin JG. Fast solubilization of recalcitrant cellulosic biomass by the basidiomycete fungus Laetisaria arvalis involves successive secretion of oxidative and hydrolytic enzymes. Biotechnol Biofuels. 2014;7(1):143.
Navarro D, Couturier M, da Silva GG, Berrin JG, Rouau X, Asther M, Bignon C. Automated assay for screening the enzymatic release of reducing sugars from micronized biomass. Microb Cell Fact. 2010;9:58.
MC carried out the functional characterization, analyzed transcriptomic and proteomic data and drafted the manuscript. DN carried out fungal cultures and prepared secretomes. DC performed proteomic analysis. BH carried out functional annotation, FP prepared RNA and cDNA materials for transcriptomic analysis and analyzed data, FJRD and ATM performed the expert annotation of class II peroxidases, IG, RR and AL performed sequencing and analysis of transcriptomes. JGB and ERM participated in the design and coordination of the study and data analysis, and helped draft the manuscript. MNR conceived of the study, participated in its design and coordination and helped to draft the manuscript. All authors read and approved the final manuscript.
We are grateful to Valentin Loux from the INRA MIGALE bioinformatics platform (http://migale.jouy.inra.fr) for providing help and support, Mireille Haon for technical assistance and Estelle Bonnin and Jacqueline Vigouroux for substrate composition analysis. We also thank Robyn Goacher for helpful discussions. MC was funded by a Marie Curie International Outgoing Fellowship within the 7th European Community Framework Program. This study was also funded by the French National Research Agency (A*MIDEX project ANR-11-IDEX-0001-02; ANR FUNLOCK ANR-13-BIME-0002-01). The work by the US Department of Energy Joint Genome Institute, a DOE Office of Science User Facility, is supported by the Office of Science of the US Department of Energy under Contract No. DE-AC02-05CH11231.
The RNA-sequencing data sets supporting the results of this article are available in the NCBI’s SRA repository under accession number SRP047955. Read counts and normalized read counts are available in GEO database repository with series accession number GSE74234.
The authors declare they have no competing interests.
About this article
Cite this article
Couturier, M., Navarro, D., Chevret, D. et al. Enhanced degradation of softwood versus hardwood by the white-rot fungus Pycnoporus coccineus . Biotechnol Biofuels 8, 216 (2015). https://doi.org/10.1186/s13068-015-0407-8
- Carbohydrate-active enzymes
- Lignin-active enzymes
- Pycnoporus coccineus