- Open Access
High-oleate yeast oil without polyunsaturated fatty acids
Biotechnology for Biofuels volume 11, Article number: 131 (2018)
Oleate-enriched triacylglycerides are well-suited for lubricant applications that require high oxidative stability. Fatty acid carbon chain length and degree of desaturation are key determinants of triacylglyceride properties and the ability to manipulate fatty acid composition in living organisms is critical to developing a source of bio-based oil tailored to meet specific application requirements.
We sought to engineer the oleaginous yeast Yarrowia lipolytica for production of high-oleate triacylglyceride oil. We studied the effect of deletions and overexpressions in the fatty acid and triacylglyceride synthesis pathways to identify modifications that increase oleate levels. Oleic acid accumulation in triacylglycerides was promoted by exchanging the native ∆9 fatty acid desaturase and glycerol-3-phosphate acyltransferase with heterologous enzymes, as well as deletion of the Δ12 fatty acid desaturase and expression of a fatty acid elongase. By combining these engineering steps, we eliminated polyunsaturated fatty acids and created a Y. lipolytica strain that accumulates triglycerides with > 90% oleate content.
High-oleate content and lack of polyunsaturates distinguish this triacylglyceride oil from plant and algal derived oils. Its composition renders the oil suitable for applications that require high oxidative stability and further demonstrates the potential of Y. lipolytica as a producer of tailored lipid profiles.
Oil is a vital facilitator of world economic growth with applications ranging from fuels, lubricants, plastics, and chemicals to food, pharmaceuticals, and personal-care products. The variety in applications arises from the wide range of properties exhibited by oils of different compositions. The majority of oil used in industry is derived from petroleum and its refined components with bio-based oil making up a small fraction . Despite the great diversity of lipids made by living organisms, large scale quantities have been produced from a small number of agricultural crops and domesticated animals and are limited in composition and hence in applications. Biotechnology enables the manipulation of the lipid composition of oleaginous, culturable organisms such as certain yeast and algae , creating a flexible platform for the production of tailored oils with potentially improved or novel properties. Petrochemical substitutes can thus be produced at large scale on a variety of feedstocks to address specific oil applications.
Safe, genetically tractable, and industrially robust, Yarrowia lipolytica is becoming a preferred platform for metabolic engineering [3,4,5,6] to produce acetyl-CoA-derived molecules such as usual and unusual fatty acids [7,8,9,10], fatty alcohols , fatty esters , beta carotenoids , alkanes , and terpenes . Lipid accumulation is induced by nutrient limitation in the presence of excess carbon and involves fatty acyl-CoA synthesis via a type I fatty acid synthase (FAS), modification of chain length and degree of desaturation by elongases and desaturases, and incorporation into triacylglyceride (TAG) via a series of enzymatic steps (reviewed in ): glycerol-3-phosphate acyltransferase (GPAT) attaches the first fatty acid onto the glycerol backbone to produce lysophosphatidic acid (LPA); lysophosphatidic acid acyltransferase (LPAT) attaches a second fatty acid to produce phosphatidic acid (PA); PA is dephosphorylated by phosphatidate phosphatase (PAP) to produce diacylglycerol (DAG); diacylglycerol acyltransferase (DGAT) activities add a final fatty acid to produce TAGs. The Y. lipolytica genome encodes two elongases (YALI0F06754, YALI0B20196), a Δ9 desaturase (OLE1 YALI0C05951), a Δ12 desaturase (FAD2 YALI0B10153), two GPATs (SCT1 YALI0C00209, GPA YALI0A10362), one LPAT (SLC1 YALI0E18964), one PAP (PAH1 YALI0D27016), and two DGATs (DGA1 YALI0E32769, DGA2 YALI0D07986) [17,18,19]. Pathway conservation between Saccharomyces cerevisiae [20, 21] and Y. lipolytica suggests that there is also significant crosstalk between the TAG biosynthesis pathway and phospholipid synthesis.
In this study, we explored the potential of Y. lipolytica as a high-oleate TAG oil producer. High-oleate TAG oil has applications in the food industry, as a chemical intermediate for oleic acid-derived products, and as a lubricant. Two key qualities of oil intended for lubrication are high oxidative stability and the ability to remain liquid at a wide range of operating temperatures . Oxidative stability correlates with the number of double bonds in the fatty acid carbon chain. Polyunsaturated fatty acids are especially vulnerable to oxidative attack and oxidation is the primary mechanism of lubricant degradation. Saturated fatty acids have oxidative stability, but limited temperature range. Monounsaturated fatty acids are an excellent compromise combining good oxidative stability and a wide useful temperature range . The native composition of Y. lipolytica TAG oil consists mainly of long chain fatty acids with up to two desaturated bonds (C16:0, C16:1 Δ9, C18:0, C18:1 Δ9, and C18:2 Δ9Δ12) . We used gene deletion and expression of heterologous genes to tailor lipid synthesis and TAG accumulation for the production of biolubricant oil that has properties as good or better than petroleum-based oil. We report the engineering of a Y. lipolytica strain that produces oil highly enriched in monounsaturated and devoid of polyunsaturated fatty acids with an oleate content exceeding 90% of total fatty acids.
Results and discussion
We previously identified wild-type Y. lipolytica strain YB-392 as a suitable starting strain based on minimal citric acid secretion, non-hyphal morphology and ease of genetic manipulation . We studied the effects of a set of genetic modifications in fatty acid synthesis and TAG storage in this background and then combined those modifications favorable to oleate accumulation into a single strain.
Elimination of polyunsaturated fatty acids
In Y. lipolytica, oleate (C18:1) is converted to linoleate (C18:2) through desaturation by the Δ12 fatty acid desaturase encoded by FAD2 YALIOB10153 . Deletion of this gene (Δfad2) leads to elimination of all detectable linoleic acid and a concomitant increase in oleic acid (Fig. 1).
In the course of studying the effect of lipid pathway gene deletion and overexpression, we found that the endogenous GPAT enzyme encoded by YALI0C00209 (YlSCT1) has a strong preference for saturated fatty acids: deletion of YlSCT1 leads to an increase in the oleate fraction and a reduction in the total lipid content of the cell (Fig. 2, compare Δsct1 to wild-type). We tested a small library of GPAT-encoding genes to determine whether they could restore lipid production in the absence of native YlSCT1 while maintaining the increased relative oleate content seen in this deletion mutant. The heterologous genes examined were SCT1 homologues from Saccharomyces cerevisiae, Arxula adeninivorans, Rhodotorula graminis, Phaeodactylum tricornutum and 2 candidates from Rhodotorula toruloides, as well as homologues of the Saccharomyces cerevisiae GPAT gene GPT2 from Naumovozyma dairenensis and Naumovozyma castellii (sequences provided in Additional file 1). These candidates share 39–52% primary sequence identity with YlSct1 protein. Expression cassettes containing YlSCT1 or one of these 8 heterologous GPAT genes under the control of the strong constitutive YlTEF1 promoter and coupled to a zeocin resistance marker were transformed into a Δsct1 Δfad2 double deletion strain (Fig. 2). GPAT genes that did not improve lipid content were not investigated further. Failure to improve lipid content could be related to poor expression or poor enzyme activity in Y. lipolytica (e.g., misfolding, absence of post-translational modification, mislocalization, and low activity for native fatty acids). We found that several GPATs both increase lipid content to wild-type levels and maintain the high-oleate composition of the parent strain. These findings underline the importance of engineering acyltransferase specificity to tailor lipid content by stabilizing the desired fatty acids into storage lipids. A. adeninivorans SCT1 (AaSCT1) was selected for subsequent strain engineering due to its positive effect on lipid content, maintenance of high-oleate levels and the close homology of this yeast with Y. lipolytica .
Δ9 desaturase engineering
Y. lipolytica expresses a single Δ9 fatty acid desaturase and produces two Δ9-desaturated fatty acids: palmitoleate (C16:1 Δ9) and oleate (C18:1 Δ9). We sought to alter the unsaturated lipid profile of our strain to decrease palmitoleate in favor of oleate. To this end, we deleted the native Δ9 fatty acid desaturase gene (ole1::hph), leading to auxotrophy for monounsaturated fatty acids. We confirmed that transformation of this strain with YlOLE1 could rescue growth on unsupplemented media and we used this selection to investigate the lipid profile phenotypes of a set of heterologous Δ9 fatty acid desaturase genes (sequences provided in Additional file 1) targeted to replace the antibiotic-resistance marker at the ole1::hph locus. Transformation with two OLE1 homologues from Rhodotorula toruloides and Rhodotorula graminis gave no viable colonies on unsupplemented media, suggesting that these genes did not successfully express a Δ9 fatty acid desaturase capable of complementing the endogenous desaturase deletion. As in the case of GPAT genes that did not yield the desired phenotype, these OLE1 homologues were not investigated further. The lack of oleic acid prototrophy complementation could be due to poor expression or poor enzyme activity. On the contrary, genes from Arxula adeninivorans, Microbotryum violaceum, Puccinia graminis, Gloeophyllum trabeum, and a second homologue from Rhodotorula toruloides all complemented Δole1 for growth on unsupplemented media. Two isolates of each transformation were chosen for further analysis. PCR analysis of the genomic locus as well as plating on hygromycin-containing media confirmed the insertion of the heterologous OLE1 genes in place of the hygromycin resistance gene (data not shown). We compared the lipid profiles of the ten heterologous OLE1 strains to wild-type (Fig. 3). The heterologous desaturases included in this study exhibited a strong preference for stearate (C18:0) over palmitate (C16:0) as the substrate of the desaturation reaction. A. adeninivorans and P. graminis OLE1 resulted in higher relative oleate content than the native gene.
High-oleate strain engineering and characterization
We combined the findings above to engineer a high-oleate strain (Fig. 4). First, a zeocin resistance cassette was used to express AaSCT1 (Y. lipolytica TEF1 promoter) in the Δsct1 background resulting in an increase in oleate levels. We observed that sct1-deleted strains accumulate an oleate degradation product, 7-hexadecenoate C16:1 Δ7, and included this species in our lipid composition analysis from this point forward. This fatty acid, the result of a single round of β-oxidation of oleic acid, was previously observed in strains, where the glycerol-3-phosphate shuttle was disrupted through gut2 deletion [26, 27]. We hypothesize that the remaining GPAT activity in sct1-deleted cells has a substrate preference for this degradation product and leads to its enrichment in TAG. C16:1 Δ7 levels decreased from 6 to 1% of total fatty acids with expression of AaSCT1 (Fig. 4b, compare Δsct1 AaSCT1 to Δsct1).
To shift monounsaturated content from C16 to C18, we then replaced the native Δ9 desaturase with P. graminis OLE1 as before (Fig. 3). The resulting Δsct1 AaSCT1 ole1::PgOLE1 strain exhibits the C18:0 substrate preference previously observed. Palmitoleic acid is reduced from 21% in the native YlOLE1 parent strain to 2%, while C18 Δ9 products (oleate and linoleate) increase from 67 to 78% (Fig. 4b).
To eliminate polyunsaturated fatty acids, the Δ12 desaturase was next deleted. The effect of this modification was particularly pronounced due to the high linoleate content of the parental strain (Fig. 4b). No linoleate could be observed upon deletion of the desaturase and oleate content increased from 62 to 82%.
The resulting strain, Δsct1 AaSCT1 ole1::PgOLE1Δfad2, still contains 10% palmitate (C16:0). We attempted to shift this fatty acid into the C18 pool through expression of the rat elongase rELO2, an enzyme previously shown to increase oleate content in S. cerevisiae . A sucrose utilization cassette was used to express rELO2 (Y. lipolytica EXP1 promoter). At the same time, an unmarked cassette for the expression of Rhodotorula toruloides DGA1 (Y. lipolytica GPD1 promoter) was co-transformed to increase the overall lipid content of the strain . Transformants were selected on plates containing sucrose as the sole carbon source and then screened for lipid production to identify high lipid content isolates with a high-oleate composition. The highest oleate producer with increased lipid levels was chosen among the rELO2-RtDGA1 transformants.
As a final step to increase oleate content, a phosphite utilization cassette  was used to express another copy of P. graminis OLE1 (A. adeninivorans TEF1 promoter). A mixture of unmarked cassettes for the expression of RtDGA1 (Y. lipolytica GPD1 promoter) and Claviceps purpurea DGA2 (Y. lipolytica TEF1 promoter) were co-transformed with P. graminis OLE1 to further increase overall lipid content . Transformants were selected on phosphite plates and then screened for lipid production. Strain NS993 emerged as the highest oleate and lipid producer (Fig. 4b, c) reaching 86% oleate and 89% monounsaturated with no polyunsaturated fatty acids in 96-well plate growth conditions.
Random integration transformations yield a range of phenotype expressivity that could be due to different levels of expression from the genomic loci of integration, the number of integration events or to the incidental disruption of an endogenous gene. We resequenced the NS993 genome using PacBio sequencing (Synthetic Genomics, La Jolla CA) to identify the number and sites of heterologous DNA integration. Reads containing matches to the DNA constructs transformed were mapped to the public Y. lipolytica genome. We found each gene integrated in one copy per transformation. The only exception was RtDGA1, which did not integrate in the final transformation step. The only copy of RtDGA1 was integrated in tandem with rELO2, the result of a single integration during the co-transformation of RtDGA1 and rELO2 cassettes in the penultimate step in NS993 engineering (confirmed by PCR on the intermediate strain, data not shown). The copy number of each overexpression cassette was confirmed by qPCR (data not shown). No known open reading frames were disrupted by these integrations. In each case, we found that the construct inserted into a relatively “open” part of a chromosome; the integration site closest to an open reading frame was 477 bp from the 3′ end of a gene, and the closest translation initiation site was 975 bp away. These results indicate that the phenotypes observed are likely explained by optimal expression of a single copy of each construct and point to the location of integration as the major determinant for strength of phenotype.
To assess strain NS993′s growth performance and lipid composition under controlled conditions, a 5-L bioreactor culture was executed. Figure 5a depicts the kinetics of an NS993 glucose fed-batch fermentation through 133 h, the final point in which a sample was taken prior to glucose exhaustion. The culture resulted in minimal citrate and polyol side-product formation and a lipid content, measured by gas chromatography as fatty acid methyl esters (FAME), of 45% of the 77 g/L total yeast dry cell weight (DCW). In comparison with wild-type strain YB-392 as previously reported in Friedlander et al. , NS993 exhibited a 1.8-fold increase in lipid content (from 25% in YB-392 to 45% in NS993). It is expected that NS993 lipid content could be further improved to reach levels reported for engineered Y. lipolytica strains. Our own previous work led to an engineered strain with 77% lipid content through deletion of the TGL3 lipase and overexpression of DGATs . Others have shown increased lipid content in Y. lipolytica through simultaneous overexpression of OLE1, acetyl-CoA carboxylase (ACC1), and DGA1 , deletions to affect glycerol-3-phosphate flux and fatty acid degradation , as well as an evolutionary approach . NS993 lipid was also characterized for its composition. The same sample used for the lipid content analysis at the end of the fermentation was comprised of 92% oleic acid and 95% monounsaturated fatty acids with no polyunsaturated fatty acids (Fig. 5b).
We engineered a Y. lipolytica strain producing TAG oil with > 90% oleate content and no polyunsaturated fatty acids. The engineered oil surpasses most plant and algal oil in oleate content [32, 33]. Its composition is competitive with oil from experimental Super-high-Oleic (SHO) safflower plants containing 92% oleate [34, 35] and sunflower oil with 89%  or up to 94% oleate when precise diurnal temperature control is applied . However, these plant oils contain 1–2.5% [35,36,37,38] polyunsaturated fatty acids, whereas NS993 oil has the distinct advantage of completely lacking polyunsaturated fatty acids. The absence of polyunsaturated fatty acids is expected to lead to superior oxidative stability . Industrial production of oil in yeast rather than plants offers flexibility in terms of feedstock, control over production, independence from such variables as weather that affects agricultural crops, and can avoid land use competition with food crops [39, 40]. High-oleate oils have industrial applications including bio-based lubricants, hydraulic fluids, and electrical transformer oils and can serve as a feedstock for the manufacture of oleochemical derivatives including diacids (e.g., azelaic acid), oleyl alcohol, and oleate esters [41, 42]. The strain itself can also form the basis of further engineering for the production of oleic acid derivatives such as ricinoleic acid in vivo .
Strains and media
Wild-type Yarrowia lipolytica strain YB-392 was obtained from the ARS Culture Collection (NRRL). All strains were cultured in YPD (10 g/L yeast extract, 20 g/L bacto peptone, and 20 g/L glucose) at 30 °C. 20 g/L agar was added to prepare solid media. Antibiotic selection was achieved with the addition of hygromycin B (300 μg/mL), nourseothricin (500 μg/mL), or zeocin (1 mg/mL) as appropriate. Supplementation with 1% Tween 80 and 0.01% oleic acid v/v was used for growth of ole1::hyg strains. Sucrose selection was carried out on minimal medium (6.7 g/L Yeast Nitrogen Base without amino acids, 20 g/L agar) supplemented with 20 g/L sucrose. Phosphite selection was carried out on defined medium (5 g/L (NH4)2SO4, 3 g/L K2SO4, 0.5 g/L MgSO4∙7H2O, 0.05 mg/L biotin, 25 mg/L myo-inositol, 1 mg/L d-pantothenic acid, 1 mg/L nicotinic acid, 1 mg/L thiamine, 1 mg/L pyridoxine, 0.2 mg/L p-aminobenzoic acid, 1 mg/L H3BO3, 0.3 mg/L CuSO4∙5H2O, 0.1 mg/L KI, 0.4 mg/L Na2MoO4∙2H2O, 4.5 mg/L ZnSO4∙7H2O, 3 mg/L FeSO4∙7H2O, 1 mg/L MnCl2∙2H2O, 15 mg/L EDTA, 0.3 mg/L CoCl2∙6H2O, 4.5 mg/L CaCl2∙2H2O, 20 g/L glucose, 20 g/L agar) with 1 mM potassium phosphite as the sole phosphorus source . Deep-well plate growth for lipid analysis was performed in a nitrogen-limited medium containing 0.5 g/L urea, 1.5 g/L yeast extract, 0.85 g/L, casamino acids, 1.7 g/L Yeast Nitrogen Base without amino acids and ammonium sulfate, 100 g/L glucose, and 5.1 g/L potassium hydrogen phthalate buffer adjusted to pH 5.5.
The E. coli hph gene, conferring hygromycin B resistance (GenBank: AEJ60084.1), the Streptomyces noursei nat gene, conferring nourseothricin resistance (GenBank: CAA51674.1), and the Streptoalloteichus hindustanus ble gene, conferring zeocin resistance (GenBank: CAA02067.1) were codon-optimized for expression in Y. lipolytica (Genscript). Arxula adeninivorans OLE1 was amplified from genomic DNA prepared from the type strain ATCC 76597. Heterologous OLE1 genes from Rhodotorula toruloides, Rhodotorula graminis, Microbotryum violaceum, Puccinia graminis, and Gloeophyllum trabeum were synthesized (Genscript) without codon optimization based on publicly available sequences: RtOLE1-1 (this gene yielded no viable colonies on unsupplemented media; GenBank: EGU12115.1 ), RtOLE1-2 (Fig. 3; GenBank: EMS19868.1 ), RgOLE1 (this gene yielded no viable colonies on unsupplemented media; Joint Genome Institute: 20683), MvOLE1 (Fig. 3; GenBank: KDE06429.1 ), PgOLE1 (Fig. 3; NCBI Reference Sequence: XP003326562.1) and GtOLE1 (Fig. 3; and NCBI Reference Sequence: XP 007867726.1 ). Arxula adeninivorans and Saccharomyces cerevisiae GPAT genes were amplified from genomic DNA prepared from the type strains ATCC 76597 and INVSc1 (Invitrogen), respectively. Heterologous GPAT genes from Rhodotorula toruloides, Rhodotorula graminis and Phaeodactylum tricornutum as well as homologues of the S. cerevisiae GPAT gene GPT2 from Naumovozyma dairenensis and Naumovozyma castellii were synthesized (Genscript) without codon optimization based on publicly available sequences: RtSCT1-1 (GenBank: EGU12399.1 ), RtSCT1-2 (GenBank: EMS25330.1 ), RgSCT1 (Joint Genome Institute: 35710), PtSCT1 (Joint Genome Institute: 54709), NdGPT2 (NCBI Reference Sequence: XP_003671489.1 ), NcGPT2 (NCBI Reference Sequence: CCC69529.1 ). Rattus norvegicus elongase rELO2 (NCBI Reference Sequence: AC_000070.1 ), Rhodotorula toruloides DGA1 (GenBank: BAH85840.1 ), and Claviceps purpurea DGA2 (GenBank: CCE31677.1 [24, 48]) were similarly synthesized without codon optimization based on published sequences. Nucleotide sequences used for heterologous gene expression are provided in the Additional material (Additional file 1).
Targeted genomic integrations were performed as previously described . To delete Y. lipolytica genes SCT1, OLE1 and FAD2, the appropriate selectable marker gene was amplified by PCR using oligonucleotide primers that attach short flanks homologous to the promoter and terminator of target genes immediately 5′ and 3′ to the ORF in combination with internal marker gene primers. A two-fragment deletion cassette was thus made for each target such that the fragments overlapped in the marker reading frame, but neither fragment alone contained the entire functional antibiotic-resistance gene. For heterologous OLE1 gene integration into Ylole1::hph, the heterologous gene was amplified as a single intact product with flanking regions as described above. All oligonucleotide primers used to amplify deletion cassettes in this study are listed in the additional material (Additional file 2: Tables S1 and S2). PCR products were transformed into hydroxyurea (Sigma-Aldrich)-treated cells .
Linear expression constructs were prepared using the standard molecular biology techniques. Each expression construct contained an expression cassette for the gene of interest alone (RtDGA1, CpDGA2) or in tandem with an expression cassette for a selectable marker (ble-AaSCT1, ScSUC2- rELO2, and ptxD-OLE1). Transformation of these constructs into Y. lipolytica strains results in random integration into the genome and can lead to a range of phenotype expressivity. Typically, 90–95 transformants were screened to identify a strain with the most improved lipid profile over the parent strain.
Log-phase Y. lipolytica cells were either treated with 50 mM hydroxyurea for 2 h (targeted integration)  or were processed directly for transformation (random integration) . Cells were washed with water and resuspended in a volume of water equal to the wet cell pellet. 50 µL was aliquoted per transformation reaction. 18 µL of desired DNA and 92 µL of transformation mix (80 μL 60% PEG4000, 5 µL 2 M DTT, 5 µL 2 M lithium acetate pH 6, and 2 µL 10 mg/mL single stranded salmon sperm DNA) were added to the cell pellet. The transformation reaction was mixed by vortexing and heat shocked at 39 °C for 1 h . Cells were centrifuged, the supernatant was discarded, and cells were resuspended in 1 mL of a suitable non-selective medium, transferred to culture tubes, and cultured overnight at 30 °C before plating on selective media.
Deep-well plate strain analysis
Strains were inoculated into 300 μL nitrogen-limited media in a 96-well deep-well plate for 72–96 h at 30 °C, 900 rpm and 70–90% humidity (Infors Multitron ATR shaker). To measure fluorescence, cells were first fixed in an equal volume of 100% ethanol at 4 °C for 30 min. 20 μL of the fixed cells were mixed with 80 μL of a master mix containing 0.625 M potassium iodide, 12.5 μM Bodipy 493/503, 0.625% DMSO, and 1.125% PEG 4000 in Costar Black well, clear bottom plates. Fluorescence was measured in arbitrary units with a SpectraMax M2 spectrophotometer (Molecular Devices) at excitation 484 nm and emission 510 nm. The optical density (OD) at 600 nm was measured in the same plate and used to normalize fluorescence readings (FL/OD). To obtain a lipid composition profile, a plate transesterification procedure was developed to extract and convert lipids to FAMEs. Cells were washed with water, pellets were frozen at − 80 °C for 30 min before placing the entire plate in a lyophilizer overnight. Dried cell pellets were crushed in the plate using a 96-pronged metal replicator (Dan-Kar). To each well 500 μL 1.25 M methanol/HCl (Sigma) was added and the plate was sealed closed and incubated at 85 °C for 1.5–2 h with vortexing at 30-min intervals. 1 mL isooctane and 0.5 mL water were then added to each well and mixed by vortexing. A sample of the FAME-containing isooctane layer was analyzed by gas chromatography and composition was determined as percent of total peak area (sum of C16:0, C16:1, C18:0, C18:1, and C18:2) for each FAME species. Because the dry cell weight in each of the 96 wells is not measured, this method yields relative compositional analysis by comparing peak areas within each sample and not quantitative fatty acid levels.
PacBio strain resequencing
PacBio sequencing (Synthetic Genomics) was carried out on genomic DNA isolated from NS993. Resulting reads were mapped to the sequences of the heterologous DNA constructs used in the creation of NS993 to assemble all reads containing inserted DNA sequence. The resulting 382 reads were mapped against the public Y. lipolytica CLIB122 genome to determine the site of each integration.
To the initial 4.4 L batch volume of a fed-batch process executed in a New Brunswick Bioflo 3000 bench-top 5 L (6.6 L total volume) fermentor, medium was added comprising of glucose (150 g/L), (NH4)2SO4 (11 g/L), Sensient Amberex 1003 yeast extract (3 g/L), Sensient Amberferm 4500 corn peptone (0.1 g/L), KH2PO4 (4 g/L), MgSO4·7H2O (2 g/L), CaCl2·6H2O (0.8 g/L), NaCl (0.4 g/L), thiamine * HCl (12 mg/L), biotin (1 mg/L), trace elements [Na2MoO4·2H2O (160 mg/L), CuSO4·5H2O (0.2 mg/L), H3BO3 (40 mg/L), MnSO4·H2O (180 mg/L), FeCl2·6H2O (75 mg/L), and Antifoam 204 (Sigma-Aldrich) (1 mL/L). Process parameters included an inoculum volume of 2% of the initial batch volume from an overnight shake flask grown in YPD, pH control at 3.5 automatically adjusted with 10 N sodium hydroxide addition, a temperature of 30 °C, aeration at 0.3 vvm air, and agitation controlled between 600 and 1000 rpm to maintain a minimum dissolved oxygen of 20%. A glucose substrate feed was initiated at 37-h post inoculation. A total volume of 1125 mL of a 75% w/v concentrated glucose stock solution was fed at a rate of 32.5 mL/h. A 7-mL fermentation sample was taken twice daily with a Flownamics Seg-flow automated sampler, totaling 84 mL of sampling volume through the 133-h timepoint. Culture supernatants were analyzed by HPLC to determine glucose, citrate, and polyol (mannitol, erythritol, arabitol, and glycerol) concentrations . Furthermore, a 1-mL aliquot of each fermentation sample was washed with an equal volume of water and dried via lyophilization, after which the cell mass was measured to obtain a DCW concentration.
Lipid extraction and GC analysis of 133-h bioreactor sample
The dried biomass prepared by lyophilization of the 1 mL 133 h fermentation sample was subjected to hexane extraction. The lyophilized cells were bead-beaten for 5 min in a Mini-Beadbeater 8 (Biospec Products) with 425–600-μm glass beads (Sigma) in the presence of hexane (Fisher Chemical). The entire mixture was then added to an oil-less syringe (HSW Norm-Ject) with a 0.22-µM nylon 25 mm disc filter attached. The sample mixture was pushed through the filter into a glass tube and then the filter washed with hexane. All eluate in the tube was blown with compressed air to remove the majority of hexane solvent. The oil was then lyophilized to remove any residual hexane. The weight of this oil represents lipid DCW, while the difference between the initial dried biomass and this value is used to calculate lipid-free DCW. The resultant lipid sample was subjected to transesterification with a solution of 0.5 N HCl in methanol (Sigma) at 85 °C for 2 h. Then, the products (FAMEs) were subjected to a liquid/liquid extraction by the addition of water and then isooctane to the methanol/HCl/products. After vigorously vortexing the two-phase mixture, it was centrifuged to facilitate phase separation. Subsequently, aliquots of the isooctane phase were analyzed with a gas chromatograph (GC; Agilent 7890) equipped with a split/splitless inlet and a flame ionization detector. Separation was achieved with split injection and an Agilent VF-23-MS capillary column (20 m × 0.15 mm × 0.15 µm). Both an internal standard (tridecanoic acid, Sigma) and external standards (Sigma NHI-D FAME Mix) were used for quantification. Percent lipid was reported as the quotient of the sum of the FAMEs (16:0, 16:1Δ7, 16:1Δ9, 18:0, 18:1, 18:2) to the initial yeast DCW.
quantitative polymerase chain reaction
yeast extract, peptone, dextrose medium
yeast nitrogen base medium
fatty acid methyl ester
fluorescence divided by optical density
fatty acid synthase
lysophosphatidic acid acyltransferase
dry cell weight
Asbridge DD. Soybeans vs. other vegetable oils as a source of edible oil products. In: Erickson DR, editor. Practical handbook of soybean processing and utilization. Urbana: AOCS Press; 1995. p. 1–8.
Meng X, Yang J, Xu X, Zhang L, Nie Q, Xian M. Biodiesel production from oleaginous microorganisms. Renew Energy. 2009;34:1–5.
Nicaud JM. Yarrowia lipolytica. Yeast. 2012;29:409–18.
Zhu Q, Jackson EN. Metabolic engineering of Yarrowia lipolytica for industrial applications. Curr Opin Biotechnol. 2015;36:65–72.
Groenewald M, Boekhout T, Neuveglise C, Gaillardin C, van Dijck PW, Wyss M. Yarrowia lipolytica: safety assessment of an oleaginous yeast with a great industrial potential. Crit Rev Microbiol. 2014;40:187–206.
Xu P, Qiao K, Ahn WS, Stephanopoulos G. Engineering Yarrowia lipolytica as a platform for synthesis of drop-in transportation fuels and oleochemicals. Proc Natl Acad Sci USA. 2016;113:10848–53.
Ledesma-Amaro R, Nicaud JM. Yarrowia lipolytica as a biotechnological chassis to produce usual and unusual fatty acids. Prog Lipid Res. 2016;61:40–50.
Beopoulos A, Verbeke J, Bordes F, Guicherd M, Bressy M, Marty A, et al. Metabolic engineering for ricinoleic acid production in the oleaginous yeast Yarrowia lipolytica. Appl Microbiol Biotechnol. 2014;98:251–62.
Xue Z, Sharpe PL, Hong SP, Yadav NS, Xie D, Short DR, et al. Production of omega-3 eicosapentaenoic acid by metabolic engineering of Yarrowia lipolytica. Nat Biotechnol. 2013;31:734–40.
Liu H-H, Madzak C, Sun M-L, Ren L-J, Song P, Huang H, et al. Engineering Yarrowia lipolytica for arachidonic acid production through rapid assembly of metabolic pathway. Biochem Eng J. 2017;119:52–8.
Wang G, Xiong X, Ghogare R, Wang P, Meng Y, Chen S. Exploring fatty alcohol-producing capability of Yarrowia lipolytica. Biotechnol Biofuels. 2016;9:107.
Meng Y, Wang G, Yang N, Zhou Z, Li Y, Liang X, et al. Two-step synthesis of fatty acid ethyl ester from soybean oil catalyzed by Yarrowia lipolytica lipase. Biotechnol Biofuels. 2011;4:6.
Celinska E, Ledesma-Amaro R, Larroude M, Rossignol T, Pauthenier C, Nicaud JM. Golden Gate Assembly system dedicated to complex pathway manipulation in Yarrowia lipolytica. Microb Biotechnol. 2017;10:450–5.
Blazeck J, Liu L, Knight R, Alper HS. Heterologous production of pentane in the oleaginous yeast Yarrowia lipolytica. J Biotechnol. 2013;165(3–4):184–94.
Yang X, Nambou K, Wei L, Hua Q. Heterologous production of alpha-farnesene in metabolically engineered strains of Yarrowia lipolytica. Bioresour Technol. 2016;216:1040–8.
Beopoulos A, Cescut J, Haddouche R, Uribelarrea JL, Molina-Jouve C, Nicaud JM. Yarrowia lipolytica as a model for bio-oil production. Prog Lipid Res. 2009;48:375–87.
Athenstaedt K. YALI0E32769g (DGA1) and YALI0E16797g (LRO1) encode major triacylglycerol synthases of the oleaginous yeast Yarrowia lipolytica. Biochim Biophys Acta. 2011;1811:587–96.
Tezaki S, Iwama R, Kobayashi S, Shiwa Y, Yoshikawa H, Ohta A, et al. Delta12-fatty acid desaturase is involved in growth at low temperature in yeast Yarrowia lipolytica. Biochem Biophys Res Commun. 2017;488:165–70.
Silverman AM, Qiao K, Xu P, Stephanopoulos G. Functional overexpression and characterization of lipogenesis-related genes in the oleaginous yeast Yarrowia lipolytica. Appl Microbiol Biotechnol. 2016;100:3781–98.
Koch B, Schmidt C, Daum G. Storage lipids of yeasts: a survey of non-polar lipid metabolism in Saccharomyces cerevisiae, Pichia pastoris and Yarrowia lipolytica. FEMS Microbiol Rev. 2014;38:892–915.
Carman GM, Han GS. Regulation of phospholipid synthesis in the yeast Saccharomyces cerevisiae. Annu Rev Biochem. 2011;80:859–83.
Bart JCJ, Gucciardi E, Cavallaro S. Lubricants: properties and characteristics. Biolubricants. Woodhead Publishing Series in Energy. Sawston: Woodhead Publishing; 2013. p. 24–73.
Kodali DR. High performance ester lubricants from natural oils. Ind Lubr Tribol. 2002;54:165–70.
Friedlander J, Tsakraklides V, Kamineni A, Greenhagen EH, Consiglio AL, MacEwen K, et al. Engineering of a high lipid producing Yarrowia lipolytica strain. Biotechnol Biofuels. 2016;9:77.
Kunze G, Gaillardin C, Czernicka M, Durrens P, Martin T, Boer E, et al. The complete genome of Blastobotrys (Arxula) adeninivorans LS3—a yeast of biotechnological interest. Biotechnol Biofuels. 2014;7:66.
Beopoulos A, Mrozova Z, Thevenieau F, Le Dall MT, Hapala I, Papanikolaou S, et al. Control of lipid accumulation in the yeast Yarrowia lipolytica. Appl Environ Microbiol. 2008;74:7779–89.
Dulermo T, Nicaud JM. Involvement of the G3P shuttle and beta-oxidation pathway in the control of TAG synthesis and lipid accumulation in Yarrowia lipolytica. Metab Eng. 2011;13:482–91.
Yazawa H, Kamisaka Y, Kimura K, Yamaoka M, Uemura H. Efficient accumulation of oleic acid in Saccharomyces cerevisiae caused by expression of rat elongase 2 gene (rELO2) and its contribution to tolerance to alcohols. Appl Microbiol Biotechnol. 2011;91:1593–600.
Shaw AJ, Lam FH, Hamilton M, Consiglio A, MacEwen K, Brevnova EE, et al. Metabolic engineering of microbial competitive advantage for industrial fermentation processes. Science. 2016;353:583–6.
Qiao K, Imam Abidi SH, Liu H, Zhang H, Chakraborty S, Watson N, et al. Engineering lipid overproduction in the oleaginous yeast Yarrowia lipolytica. Metab Eng. 2015;29:56–65.
Liu L, Pan A, Spofford C, Zhou N, Alper HS. An evolutionary metabolic engineering approach for enhancing lipogenesis in Yarrowia lipolytica. Metab Eng. 2015;29:36–45.
Bart JCJ, Gucciardi E, Cavallaro S. Renewable feedstocks for lubricant production. Biolubricants. Woodhead Publishing Series in Energy. Sawston: Woodhead Publishing; 2013. p. 121–248.
Hoekman SK, Broch A, Robbins C, Ceniceros E, Natarajan M. Review of biodiesel composition, properties, and specifications. Renew Sust Energ Rev. 2012;16:143–69.
SHO safflower—CSIRO. 2015. https://www.csiro.au/en/Research/AF/Areas/Plant-Science/Bio-based-oils/SHO-safflower. Accessed 12/12/2017.
Wood CC, Okada S, Taylor MC, Menon A, Mathew A, Cullerne D, et al. Seed-specific RNAi in safflower generates a superhigh oleic oil with extended oxidative stability. Plant Biotechnol J. 2018. https://doi.org/10.1111/pbi.12915.
Schuppert GF, Tang S, Slabaugh MB, Knapp SJ. The sunflower high-oleic mutant ol carries variable tandem repeats of FAD2-1, a seed-specific oleoyl-phosphatidyl choline desaturase. Mol Breed. 2006;17:241–56.
Lagravere T, Champolivier L, Lacombe S, Kleiber D, Berville A, Dayde J. Effects of temperature variations on fatty acid composition in oleic sunflower oil (Helianthus annuus L.) hybrids. 15th international sunflower conference, Toulouse. 2000, p. 73–8.
Wood C, Liu Q, Cao J, Zhou X-R, Green A, Singh S. The molecular basis of high and super-high oleic saffower seed oils. 20th international symposium on plant lipids; Seville. 2012.
Bart JCJ, Gucciardi E, Cavallaro S. Markets for biolubricants. Biolubricants. Woodhead Publishing Series in Energy. Sawston: Woodhead Publishing; 2013. p. 712–54.
Norrby T. Environmentally adapted lubricants—where are the opportunities? Ind Lubr Tribol. 2003;55:268–74.
Köckritz A, Blumenstein M, Martin A. Catalytic cleavage of methyl oleate or oleic acid. Eur J Lipid Sci Tech. 2010;112:58–63.
Hill K. Industrial Development and Application of Biobased Oleochemicals. In: Centi G, van Santen RA, editors. Catalysis for renewables: from feedstock to energy production. Weinheim: Wiley-VCH Verlag GmbH & Co. KGaA; 2007. p. 75–99.
Paul D, Magbanua Z, Arick M 2nd, French T, Bridges SM, Burgess SC, et al. Genome sequence of the oleaginous yeast Rhodotorula glutinis ATCC 204091. Genome Announc. 2014;2:e00046-14.
Zhu Z, Zhang S, Liu H, Shen H, Lin X, Yang F, et al. A multi-omic map of the lipid-producing yeast Rhodosporidium toruloides. Nat Commun. 2012;3:1112.
Perlin MH, Amselem J, Fontanillas E, Toh SS, Chen Z, Goldberg J, et al. Sex and parasites: genomic and transcriptomic analysis of Microbotryum lychnidis-dioicae, the biotrophic and plant-castrating anther smut fungus. BMC Genom. 2015;16:461.
Floudas D, Binder M, Riley R, Barry K, Blanchette RA, Henrissat B, et al. The paleozoic origin of enzymatic lignin decomposition reconstructed from 31 fungal genomes. Science. 2012;336:1715–9.
Gordon JL, Armisen D, Proux-Wera E, OhEigeartaigh SS, Byrne KP, Wolfe KH. Evolutionary erosion of yeast sex chromosomes by mating-type switching accidents. Proc Natl Acad Sci USA. 2011;108:20024–9.
Schardl CL, Young CA, Hesse U, Amyotte SG, Andreeva K, Calie PJ, et al. Plant-symbiotic fungi as chemical engineers: multi-genome analysis of the Clavicipitaceae reveals dynamics of alkaloid loci. PLoS Genet. 2013;9:e1003323.
Tsakraklides V, Brevnova E, Stephanopoulos G, Shaw AJ. Improved gene targeting through cell cycle synchronization. PLoS ONE. 2015;10:e0133434.
Chen DC, Beckerich JM, Gaillardin C. One-step transformation of the dimorphic yeast Yarrowia lipolytica. Appl Microbiol Biotechnol. 1997;48:232–5.
VT and AK screened enzymes for desired phenotypes and performed all strain engineering steps. JF developed the plate transesterification protocol and assisted with strain screening. MH performed the strain comparison presented in Fig. 4. HB carried out qPCR experiments and resequencing analysis and contributed to the manuscript. AS, DC, JA performed all analytical chemistry. AC, KM and EG designed, performed and analyzed bioreactor fermentations. AC contributed to the manuscript. JS contributed to the development of the plate transesterification protocol and provided technical assistance. EB and AJS contributed to gene candidate identification. GL and CS contributed to the design of the study. VT designed experiments and prepared the manuscript. All authors read and approved the final manuscript.
The authors are current employees, former employees, or otherwise affiliated with Novogy, Inc., which has a commercial interest in the strains described in this study. The authors declare no other non-financial competing interests.
Availability of data and materials
All data generated or analyzed during this study are included in this published article [and its additional information files].
Consent for publication
Ethics approval and consent to participate
This study was wholly funded by Novogy, Inc.
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.