Hydrogen peroxide-independent production of α-alkenes by OleTJE P450 fatty acid decarboxylase

Background Cytochrome P450 OleTJE from Jeotgalicoccus sp. ATCC 8456, a new member of the CYP152 peroxygenase family, was recently found to catalyze the unusual decarboxylation of long-chain fatty acids to form α-alkenes using H2O2 as the sole electron and oxygen donor. Because aliphatic α-alkenes are important chemicals that can be used as biofuels to replace fossil fuels, or for making lubricants, polymers and detergents, studies on OleTJE fatty acid decarboxylase are significant and may lead to commercial production of biogenic α-alkenes in the future, which are renewable and more environmentally friendly than petroleum-derived equivalents. Results We report the H2O2-independent activity of OleTJE for the first time. In the presence of NADPH and O2, this P450 enzyme efficiently decarboxylates long-chain fatty acids (C12 to C20) in vitro when partnering with either the fused P450 reductase domain RhFRED from Rhodococcus sp. or the separate flavodoxin/flavodoxin reductase from Escherichia coli. In vivo, expression of OleTJE or OleTJE-RhFRED in different E. coli strains overproducing free fatty acids resulted in production of variant levels of multiple α-alkenes, with a highest total hydrocarbon titer of 97.6 mg·l-1. Conclusions The discovery of the H2O2-independent activity of OleTJE not only raises a number of fundamental questions on the monooxygenase-like mechanism of this peroxygenase, but also will direct the future metabolic engineering work toward improvement of O2/redox partner(s)/NADPH for overproduction of α-alkenes by OleTJE.


Background
The urgency to develop sustainable fossil fuel alternatives is driven by rapidly increasing global consumption, irreversibly diminishing reserves, unpredictable geopolitical factors, fluctuating price of crude oil, growing concerns about national energy security, and serious environmental concerns surrounding immense greenhouse gas emissions mainly resulting from combustion of fossil fuels [1][2][3]. Biofuels produced from biological resources represent a compelling alternative to fossil fuels because they are renewable and more environmentally friendly [4][5][6][7]. Among various biofuels, bioethanol and biodiesel are dominating the current global market. However, it is widely accepted that the ideal biofuels are biohydrocarbons, especially the medium-to long-chain fatty alkanes or alkenes, because they highly mimic the chemical composition and physical characteristics of petroleum-based fuels [8][9][10]. Thus, the biosynthetic pathways for aliphatic hydrocarbons from diverse organisms have been attracting great attentions in recent years [11][12][13]. Particularly, the scalable and cost-effective microbial biosynthesis of fatty alkanes or alkenes is considered as one of the most promising ways to produce 'drop-in compatible' biofuels [5,8].
To date, four microbial biosynthetic pathways that convert free fatty acids or fatty acid thioesters into bio-hydrocarbons have been identified, including the cyanobacterial pathways consisting of an acyl-acyl carrier protein (acyl-ACP) reductase and an aldehyde decarbonylase, which together convert fatty acyl-ACPs into alkanes [14]; a three-gene cluster responsible for generating alkenes with internal double bonds through the head-to-head condensation of two fatty acyl-coenzyme A (acyl-CoA) molecules in Micrococcus luteus [15]; a unique P450 decarboxylase OleT JE from Jeotgalicoccus sp. ATCC 8456, which directly decarboxylates long-chain fatty acids to form α-olefins in presence of H 2 O 2 [16,17]; and a type I polyketide synthase from Synechococcus sp. PCC 7002 [18,19], which is capable of transforming fatty acyl-ACPs into α-olefins via sequential polyketide synthase chain elongation, keto reduction, sulfonation mediated by its sulfotransferase domain, and the coupled hydrolysis and decarboxylation catalyzed by the thioesterase domain.
Among these pathways, the single-step decarboxylation of fatty acids catalyzed by OleT JE P450 enzyme [16] apparently represents the simplest one. Moreover, it directly uses free fatty acids instead of fatty acid thioesters as substrates, which is believed to be advantageous for metabolic engineering because fatty acids are more abundant and their abundance and composition can be well manipulated in E. coli [20][21][22], one of the most developed microbial cell factories. Thus, this P450 fatty acid decarboxylative machinery may hold great potential to be engineered into a biological α-alkene-producing system. Notably, in addition to being biofuel molecules, α-alkenes are also used broadly for making lubricants, polymers and detergents [17,23,24].
The superfamily of cytochrome P450 enzymes (CYPs) are considered among the most versatile biocatalysts in nature [25]. Typically, P450 enzymes employ one or more redox partner proteins to transfer two electrons from NAD(P)H to the heme iron reactive center for dioxygen activation, and then insert one atom of O 2 into their substrates [25][26][27]. Therefore, these oxidative biocatalysts are often termed as P450 monooxygenases. However, the CYP152 family members such as P450 SPα [28], P450 BSβ [29] and OleT JE [16] have been identified to exclusively use H 2 O 2 as the sole electron and oxygen donor, and are thus classified into a unique P450 peroxygenase category.
Practically, the peroxygenase activity of P450 enzymes is often treated as an advantageous feature because H 2 O 2 is much cheaper than NADPH and redox proteins in many P450 applications such as biocatalysts for in vitro synthetic reactions and enzyme additives in laundry detergents [30,31]. However, the large-scale production of low-cost α-alkene biofuels by OleT JE P450 decarboxylase cannot rely on the H 2 O 2 -dependent enzymatic system because the use of large amounts of peroxide is cost prohibitive, and high concentration of H 2 O 2 can quickly deactivate biocatalysts [32].
Therefore, the H 2 O 2 -independent activity of OleT JE , if it exists, is preferred for cost-effective microbial production of α-alkenes. In the present study, we demonstrated such activity for the first time. Through engineering a selfsufficient version of OleT JE by fusing it to the Rhodococcus fusion reductase (RhFRED) domain from Rhodococcus sp. NCIMB 9784 [33], the catalytic activity of the resultant fusion P450 enzyme can be solely driven by NADPH. We also found that E. coli flavodoxin (Fld) and flavodoxin reductase (FdR) are capable of supporting OleT JE activity as well. Guided by these new findings, our initial metabolic engineering efforts based on the H 2 O 2 -independent decarboxylation of fatty acids by OleT JE in vivo led to a group of α-alkene overproducers with the best one producing 97.6 mg·l -1 total α-alkenes.

Results
In vitro fatty acid decarboxylation by OleT JE and OleT JE -RhFRED The unusual activity of the first P450 fatty acid decarboxylase OleT JE was determined by reconstituted in vitro reactions [16]. Specifically, OleT JE was able to decarboxylate stearic acid and palmitic acid to generate 1-heptadecene and 1-pentadecene, respectively, in the presence of H 2 O 2 ( Figure 1A). It also catalyzed the αand β-hydroxylation of fatty acids as side reactions. Using the purified P450 enzymes (Additional file 1: Figure S1 and Additional file 2: Figure S2), we first confirmed these three types of activity of OleT JE using myristic acid (C 14 ) as substrate. Consistent with the previous report [16], fatty acid decarboxylation was the dominant reaction, while the αand β-hydroxymyristic acid only accounted for 0.2% and 6.1% of total products, respectively ( Figure 1B).
According to previous amino acid sequence analysis, OleT JE was assigned to the CYP152 family, with the well-studied P450 BSβ [29,34,35] from Bacillus subtilis and P450 SPα [28,36] from Sphingomonas paucimobilis as family members. Essentially, this family of P450 enzymes utilizes H 2 O 2 as the sole electron and oxygen donor to oxidize their substrates, in contrast to most other P450 monooxygenases, whose catalytic activity depends on dioxygen, NAD(P)H and redox partner protein(s) [37]. Thus, these P450 enzymes are functionally referred to as peroxygenases [38]. Indeed, it was reported that P450 reductase systems such as ferredoxin and ferredoxin reductase did not support the activity of P450 BSβ and P450 SPα [36,39]. This is consistent with the substitution of Pro 246 and Arg 245 (numbering in OleT JE ) in CYP152 peroxygenases for the highly conserved threonine and an acidic residue (for example, Glu or Asp) in most P450 monooxygenases (Additional file 3: Figure S3), which are involved in a specific H-bond network responsible for delivery of protons during the P450 catalytic cycle [34,40].
However, in the study of another CYP152-member P450 CLA , from the anaerobic microorganism Clostridium acetobutylicum [41], it was demonstrated that both P450 CLA and P450 BSβ functioned when provided with O 2 , NADPH and flavodoxin/flavodoxin reductase from E. coli or the diflavin reductase domain of P450 BM3 from Bacillus megaterium, suggesting an alternative monooxygenaselike mechanism of these P450 peroxygenases.
To investigate whether OleT JE peroxygenase can also function as a monooxygenase like P450 CLA and P450 BSβ , the RhFRED reductase domain from Rhodococcus sp. NCIMB 9784 [33] was fused to the C-terminus of OleT JE . In the presence of the electron donor NADPH, the fusion protein OleT JE -RhFRED successfully converted lauric acid (C 12 ) into 1-undecene with the conversion ratio of 51.1 ±0.3%, approximately half that of OleT JE plus H 2 O 2 (93.0 ±4.3% conversion; Figure 2). Notably, the product distribution (decarboxylation versus hydroxylation) of the OleT JE -RhFRED catalyzed reaction was similar to that of the OleT JE reaction ( Figure 1B), indicating the fused reductase domain has no significant impact on the catalytic mechanism of P450 domain. As control, OleT JE cannot directly use NADPH as electron donor. OleT JE -RhFRED was not active by itself. Interestingly, OleT JE -RhFRED retained its ability to use H 2 O 2 as a cofactor, but there was not a significant additive effect between NADPH and H 2 O 2 for supporting the activity of OleT JE -RhFRED ( Figure 2).
To prevent the spontaneous generation of H 2 O 2 during the OleT JE -RhFRED reaction, which could complicate interpretation of the results, dithiothreitol (DTT: the reducing agent often used in the storage and reaction buffer of P450 proteins) was omitted from all buffers used during protein purification, storage and reaction because it has previously been reported that DTT, dioxygen and the heme iron center of P450 can react to generate H 2 O 2 [16,42]. To further exclude the possibility that H 2 O 2 could be produced from the peroxide shunt pathway during the monooxygenase catalytic cycle [27], bovine liver catalase that is able to efficiently eliminate H 2 O 2 was added to the fatty acid decarboxylation reactions (in the DTT-free buffer) catalyzed by OleT JE and OleT JE -RhFRED. In the OleT JE plus H 2 O 2 system, pre-addition of catalase completely abolished the reaction ( Figure 3). By contrast, in the OleT JE -RhFRED plus NADPH reaction, pre-added catalase did not significantly change (indeed, it slightly improved) the conversion of myristic acid to 1-tridecene ( Figure 3). This clearly indicates that the decarboxylation activity of OleT JE -RhFRED can be solely supported by NADPH.

Substrate specificity of OleT JE and OleT JE -RhFRED
The substrate preference of OleT JE and OleT JE -RhFRED provides useful information to help understand the in vivo behavior of these fatty acid decarboxylases and to guide the metabolic engineering of fatty acid biosynthesis. Thus, we determined their substrate specificity ( Figure 4) using a number of straight-chain saturated fatty acids with evennumbered chain length ranging from C 8 to C 20 . In the case of OleT JE ( Figure 4A), myristic acid (C 14 ) turned out to be the best substrate for olefin production among the tested fatty acids with the conversion ratio of 97.0 ± 2.8%. Lauric acid (C 12 ) and palmitic acid (C 16 ) were sub-optimal. OleT JE was only able to convert a minority of stearic acid (C 18 ) and arachidic acid (C 20 ), but could not decarboxylate capric acid (C 10 ) or caprylic acid (C 8 ).
In comparison, the substrate preference spectrum of OleT JE -RhFRED slightly shifted toward shorter fatty acids ( Figure 4B), which suggests that the P450-reductase interaction might induce small conformational change of the OleT JE active site. Specifically, OleT JE -RhFRED showed the highest activity against lauric acid (83.8 ±0.1% conversion), but was inactive toward arachidic acid. Similar to OleT JE , OleT JE -RhFRED could not decarboxylate capric acid or caprylic acid. It is also worth noting that the system of OleT JE -RhFRED plus NADPH plus O 2 was less active than OleT JE plus H 2 O 2 when reacting with most tested fatty acids except for lauric acid, suggesting OleT JE might have evolved to become a better peroxygenase than a monooxygenase.
As expected, all these engineered strains successfully accumulated multiple α-alkenes, including 1-tridecene, trideca-1,6-diene, 1-pentadecene, pentadecene-1,8-diene and heptadeca-1,10-diene ( Figure 5A and Additional file 4: Figure S4), which correspond to the decarboxylation products of the 14:0, 14:1, 16:0, 16:1 and 18:1 fatty acids, respectively. This fatty acid composition is consistent with previous reports [43]. In all cases, the major alkene product was heptadeca-1,10-diene with the highest yield of 7.7 mg·l -1 in YL7. Since XL100/(pMSD8 + pMSD15) is able to produce more free fatty acids than XL100 [43], the total alkene titers of YL7 and YL8 were significantly greater than those of YL5 and YL6. Notably, expression of P450 decarboxylases did not significantly affect the cell growth of all strains (Additional file 5: Figure S5). According to a previous report [44], H 2 O 2 levels in growing E. coli are less than 20 nM, and 2 μM H 2 O 2 could cause substantial growth inhibition. Therefore, the physiological concentration of H 2 O 2 is far below the optimal H 2 O 2 concentration (200 to 500 μM) [16] for supporting OleT JE catalysis. Thus, we had predicted that OleT JE -RhFRED using endogenous NADPH, whose physiological concentration is around 120 μM [45], might catalyze the decarboxylation more efficiently than OleT JE using H 2 O 2 as a cofactor. Unexpectedly, the highest titer (11.8 mg·l -1 ) and productivity (4.5 mg·g dcw -1 ) of total alkenes was achieved by YL7 with OleT JE instead of YL8 with OleT JE -RhFRED. This contradiction has led to a hypothesis that OleT JE is able to employ the native redox system of E. coli to drive catalysis, such as P450 CLA and P450 BSβ [41].
To test this hypothesis, we expressed and purified the E. coli Fld and FdR. In the in vitro reaction containing OleT JE , Fld, FdR and NADPH, myristic acid was substantially converted into 1-tridecene ( Figure 3). Therefore, Fld and FdR probably better serve OleT JE than the fused RhFRED in vivo, explaining why YL7 was a better alkene producer than YL8. However, the supportive role of H 2 O 2 cannot be entirely neglected.
Inspired by these results, we attempted to enhance the level of dissolving dioxygen for improving OleT JE catalysis during the cultivation of the best alkene producer, YL7, by applying a higher rotation rate of 250 rpm. Moreover, the defined mineral medium [14] containing 3% glucose was used to standardize the culture condition for  the future metabolic engineering, and the culture time was extended to 40 h. Significantly, the total alkene titer of YL7 under these conditions was 97.6 mg·l -1 ( Figure 5B), which is almost seven-fold higher than that in lysogeny broth (LB) medium at 220 rpm for 20 h ( Figure 5A). The productivity of total alkenes was also improved from 4.5 mg·g dcw -1 (in LB over 20 h) to 24.9 mg·g dcw -1 (in the defined mineral medium over 40 h, data not shown). Again, heptadeca-1,10-diene was the major alkene product (41.4 mg·l -1 ). As control, the production of free fatty acids by the strain XL100/(pMSD8 + pMSD15) without OleT JE expression was evaluated. Octadec-11-enoic acid was the most abundant fatty acid with a titer of 96.1 mg·l -1 (Additional file 6: Figure S6). This well explains why its decarboxylated product, heptadeca-1,10-diene, had the highest yield among produced alkenes ( Figure 5). With respect to fatty acid conversion, octadec-11-enoic acid had the highest conversion ratio (85.9%) followed by hexadec-9-enoic acid (85.7%), myristic acid (75.7%), palmitic acid (74.0%) and lauric acid (24.4%). The low conversion of lauric acid seems to be inconsistent with the in vitro result ( Figure 4A), which is likely due to the low intracellular concentration of the C 12 fatty acid.

Discussion
The cytochrome P450 enzymes are a superfamily of b-type heme proteins, capable of catalyzing more than 20 different types of reactions [25,46,47]. The H 2 O 2assisted decarboxylation of long-chain fatty acids catalyzed by P450 OleT JE represents a novel activity of this highly versatile superfamily. This activity may be mechanistically similar to that of P450 Rm (CYP53B) from the yeast Rhodotorula minuta [48], which decarboxylates isovalerate to form isobutene.
According to protein sequence alignment (Additional file 3: Figure S3), OleT JE belongs to the CYP152 peroxygenase family together with the well-studied P450 BSβ and P450 SPα [28,29], and other members. Functionally, these P450 peroxygenases were previously thought to have no ability of utilizing dioxygen to drive catalysis as typical P450 monooxygenases do [39]. However, we have unambiguously demonstrated that OleT JE can perform H 2 O 2 -independent catalysis when partnering with the fused RhFRED reductase or the E. coli Fld/FdR system to transfer electrons from NADPH to the heme iron reactive center. This strongly suggests that OleT JE can undergo the monooxygenase catalytic cycle to generate the highly reactive ferryl-oxo cation radical species (Compound I) for catalysis. In the well-accepted mechanism for dioxygen activation in P450 monooxygenases ( Figure 6), two protons (and two electrons from NADPH) are required for generation of Compound I [27]. However, the conserved threonine and an acidic residue involved in proton delivery in normal P450 monooxygenases [34,40] are replaced by Pro and Arg, respectively, which are absolutely conserved in OleT JE and all other known CYP152 family members (Additional file 3: Figure  S3). This strongly suggests an unknown proton transfer pathway. To elucidate this hypothetical pathway, we are currently seeking to solve the crystal structure of OleT JE .
Evolutionarily, because the early Earth's environment probably had more H 2 O 2 and peroxygenated organic chemicals than O 2 , P450 peroxygenases are presumed to have emerged ahead of P450 monooxygenases [38]. Thus, the ability of most P450 monooxygenases to use  Figure 6) could be understood as a remnant function inherited from their peroxygenase ancestors, whereas the OleT JE P450 peroxygenase bearing the monooxygenase property might represent a transition species during the evolving process from peroxygenase to monooxygenase. Under certain circumstances, such as in vitro synthetic reactions using purified P450s and application of P450 enzymes in laundry detergents, the peroxygenase activity supported by H 2 O 2 is advantageous because expensive redox partner proteins and NAD(P)H are not needed [30,31]. However, the peroxygenase nature is not a good feature if attempting to construct a biofuel-producing microorganism by taking advantage of the fatty acid decarboxylation activity of OleT JE . Essentially, the intracellular level of H 2 O 2 cannot be increased to the concentration (10 1 to 10 2 μM range) required for efficiently supporting OleT JE because at this level, H 2 O 2 is toxic or fatal to all organisms including E. coli. Thus, that the activity of P450 OleT JE can be supported by O 2 /redox partner(s)/NADPH besides H 2 O 2 is a significant discovery because the former three factors are more viable targets for metabolic engineering [49][50][51]. Being aware of this,  future metabolic engineering work aiming to improve the in vivo productivity of α-alkenes by OleT JE probably should be directed to improvement of the intracellular level of dioxygen, redox partner protein(s) and/or NADPH. For example, among numerous metabolic strategies for in vivo up-regulation of NADPH [49], the NADPH regenerating system could be used for maintaining the high intracellular level of this reducing cofactor to better support the activity of OleT JE and the overproduction of fatty acids [52,53], both of which require a sufficient supply of NADPH.
In the mutant E. coli strains with up-regulated fatty acid biosynthesis (XL100 and XL100/(pMSD8 + pMSD15)), both OleT JE and OleT JE -RhFRED were functional, therefore significantly converting fatty acids into α-alkenes. Consistent with the previous report [16], the common major product of four engineered alkene producers (YL5-8) turned out to be heptadeca-1,10-diene, but the second most abundant alkene varied ( Figure 5A). This is likely because octadec-11-enoic acid (the precursor of heptadeca-1,10-diene) was the predominant component of the fatty acid pool of the tested strains (Additional file 6: Figure  S6). However, there might be an additional reason that octadec-11-enoic acid is a preferred substrate in vivo. Interestingly, in previous studies [43,54,55], palmitic acid rather than octadec-11-enoic acid was the major component in the fatty acid pool of E. coli. This inconsistency could be due to different culture conditions. After 20 h cultures of YL7 in LB medium, significant amounts of fatty acids remained unreacted with OleT JE (Additional file 4: Figure S4). By contrast, the majority of fatty acids in YL7 were consumed by OleT JE over the longer and more oxygenated cultivation in the defined mineral medium ( Figure 5B). This suggests that, at the current stage, the yield of fatty acids might be the major limiting factor for further improvement of α-alkene titers. Thus, the overproduction of fatty acids needs to be significantly optimized prior to other engineering efforts on up-regulating the level of OleT JE , redox partners, O 2 and NADPH.
In this report, the best bio-hydrocarbon-producing strain YL7 accumulated 97.6 mg·l -1 of total alkenes. This yield is comparable to or better than a majority of engineered alkane and alkene biosynthetic pathways with reported yields. These include the artificial alkane biosynthetic pathway in E. coli consisting of the carboxylic acid reductase from Mycobacterium marinum that catalyzes formation of fatty aldehydes directly from fatty acids, and the aldehyde decarbonylase from Synechocystis sp. PCC 6803 to produce alkanes (yield: approximately 2 mg·l -1 ) [56]; the hybrid system using the fatty acid reductase complex (LuxC, LuxE and LuxD) to provide fatty aldehyde as the substrate for downstream aldehyde decarbonylase to generate alkanes (yield: ap-proximately 2 to 5 mg·l -1 ) [20]; and the ATP required decarboxylation of 3-hydroxy-3-methylbutyrate catalyzed by the R74H mutant of mevalonate diphosphate decarboxylase from Saccharomyces cerevisiae (productivity: 5,888 pmol·h -1 ·g cells -1 ) [57]. It is only lower than the 300 mg·l -1 of total alkane titer produced when the cyanobacterial pathway consisting of the acyl-ACP reductase Orf1594 from Synechococcus elongates PCC7942 and the aldehyde decarbonylase from Nostoc punctiforme PCC73102 was heterologously expressed in E. coli [14]. However, it is expected that more metabolic engineering efforts and optimization of fermentation will further increase the total alkene titers of the OleT JE /E. coli system, which is currently ongoing in our laboratory.

Conclusions
The H 2 O 2 independence of OleT JE described in this work not only raises a number of fundamental questions regarding its monooxygenase-like mechanism, but also could direct future metabolic engineering work toward improvement of O 2 /redox partner(s)/NADPH for optimal activity of OleT JE in vivo. Considering its high conversion rate in vitro and H 2 O 2 -independent functionality in vivo, it is of great potential for engineering a hyperproducer of α-alkenes on the basis of OleT JE .

Materials
Fatty acid substrates, terminal alkene authentic standards, and derivatizing reagents were purchased from TCI (Shanghai, China). Antibiotics were obtained from Solar-Bio (Beijing, China). Other chemicals were from Sigma Aldrich (St. Louis, MO, USA) or Ameresco (Solon, OH, USA). Oligonucleotides were synthesized by Sangon Biotech (Shanghai, China), and their sequences are shown in Additional file 7: Table S1. The Pfu DNA polymerases and all restriction endonucleases were obtained from Fermentas (Vilnius, Lithuania) or Takara (Dalian, China). The kits used for molecular cloning were from OMEGA Bio-Tek (Jinan, China) or Promega (Madison, WI, USA). Protein purification used Qiagen Ni-NTA resin (Valencia, CA, USA), Millipore Amicon Ultra centrifugal fliters (Billerica, MA, USA) and PD-10 desalting columns from GE Healthcare (Piscataway, NJ, USA). Bovine liver catalase was purchased from Sigma Aldrich.

Molecular cloning
Strains and plasmids constructed and used in this study are listed in Table 1. The gene of oleT JE was amplified from the genomic DNA of Jeotgalicoccus sp. ATCC 8456 using the primer pair of OleT-NdeI/OleT-HindIII ( Table 1). The gel-cleaned PCR fragment was double digested by NdeI and HindIII and subsequently ligated into the NdeI/HindIII pre-treated pET28b to afford pET28b-oleT JE (Additional file 8: Figure S7A). For pET28b-oleT JE -RhFRED, the genes of oleT JE and RhFRED were first fused by overlap extension PCR [58]. Briefly, the gene encoding RhFRED reductase was amplified from the previously constructed pET28b-pikC-RhFRED [59,60] with a pair of primers including RhFRED-F and RhFRED-R. The oleT JE gene was amplified from pET28b-oleT JE , using the primers OleT-F and OleT-RhFRED-OE. Then the two PCR fragments with overlap sequence were mixed, annealed, extended and finally amplified with the OleT-F/RhFRED-R primer pair, giving rise to the fused gene of oleT JE -RhFRED. This fusion product was digested by NdeI/HindIII and inserted into the NdeI/HindIII-digested pET28b to generate pET28b-oleT JE -RhFRED (Additional file 8: Figure S7B).
Using the genomic DNA of E. coli DH5α as template, the two genes encoding Fld and FdR were amplified with the primer pairs of Fld-BamHI-F/Fld-SalI-R and FdR-BamHI-F/FdR-SalI-R, respectively. Next, the fld and fdR genes were sub-cloned into pACYCDuet-1 and pCDFDuet-1 respectively, resulting in pACYCDuet-fld and pCDFDuet-fdR. All sub-cloned sequences were confirmed by DNA sequencing at Sangon Biotech, Shanghai.
Protein purification was carried out as described elsewhere [61] with slight modifications. Specifically, the cell pellets harvested by centrifugation (5,000 × g, 4°C, 15 min) were stored at −80°C and melted at ambient temperature immediately before use. Then the cell pellets were resuspended in 40 ml of pre-chilled lysis buffer (pH 8.0, 50 mM NaH 2 PO 4 , 300 mM NaCl, 10% glycerol and 10 mM imidazole) through vortexing. Following a sonication step, the cell lysate was centrifuged at 12,000 × g for 30 min to remove the insoluble fraction. To the supernatant, 1 ml of Ni-NTA resin was added and gently mixed at 4°C for 1 h. The slurry was loaded onto an empty column, and washed with approximately 100 ml of wash buffer (pH 8.0, 50 mM NaH 2 PO 4 , 300 mM NaCl, 10% glycerol and 20 mM imidazole) until no proteins were detectable in flowthrough. The bound target proteins were eluted with elution buffer (pH 8.0, 50 mM NaH 2 PO 4 , 300 mM NaCl, 10% glycerol and 250 mM imidazole). The eluent was concentrated with an Amicon Ultra centrifugal filter, and buffer exchanged on a PD-10 desalting column. Finally, the desalted purified proteins (Additional file 1: Figure S1) in storage buffer (pH 7.4, 50 mM NaH 2 PO 4 , 10% glycerol) were flash-frozen by liquid nitrogen and stored at −80°C for later use.

In vitro enzymatic assays with purified proteins
The fatty acid decarboxylation assays containing 0.2 to 1.0 μM OleT JE or OleT JE -RhFRED, 200 μM fatty acid substrate (from C 8 to C 20 ), 500 μM H 2 O 2 (for OleT JE ) or 500 μM NADPH (for OleT JE -RhFRED) in 200 μl of storage buffer were carried out at 28°C for 2 h. In the assay to test whether E. coli Fld and FdR are able to support the activity of OleT JE , 5 μM Fld and 5 μM FdR were mixed with 200 μM myristic acid, 500 μM NADPH and 1 μM OleT JE in 200 μl of storage buffer. To remove spontaneously generated H 2 O 2 , bovine liver catalase was added to the final concentration of 20 U·ml -1 .
All above described reactions were quenched by addition of 20 μl of 10 M HCl. Heptadecanoic acid was added as internal standard and the mixture was extracted by 200 μl ethyl acetate. Samples were then analyzed by gas chromatography-mass spectroscopy (GC-MS; see below).

In vivo production of α-alkenes
The E. coli fadD deletion mutant strain XL100 [43] that overproduces fatty acids was selected as the starting host for construction of alkene-producing strains. Plasmids pMSD8 and pMSD15 were gifts from Dr. John Cronan and were used in the strain XL100 to construct fatty acid-overproducing strains. Bacterial cells transformed with certain plasmid(s) ( Table 1) were either grown in 50 ml of LB medium or in 50 ml of defined mineral medium [14] containing 3% glucose as the carbon source, supplemented with appropriate selective antibiotics, thiamine (1 mM) and a rare salt solution. All cultivations were performed at 37°C and induced at an OD 600 of 0.9 to 1.0 with 0.4% arabinose (for pMSD15) followed by 0.2 mM IPTG (for pMSD8, and pET28b-oleT JE or pET28b-oleT JE -RhFRED) after 0.5 h. Next, cells were grown at 28°C (the optimal temperature for OleT JE expression) for an additional 20 h at 220 rpm (in LB medium) or 40 h at 250 rpm (in the defined mineral medium). For analysis of hydrocarbon production, 20 ml of culture with 10 μl heptadecanoic acid added as internal standard was sonicated for 10 min and then thoroughly mixed with an equal volume of chloroformmethanol (2:1, vol/vol). The aqueous-organic mixture was centrifuged (8,000 × g for 15 min) for phase separation. The organic phase was transferred into a clean tube, evaporated under a nitrogen flow, and re-dissolved in 500 μl of n-hexane as the testing sample. Prior to GC-MS analysis, 5 μl eicosane was added as calibration standard. All experiments were repeated two to four times.

Analytical methods
The GC-MS analytical method for hydrocarbon and fatty acid samples was adapted from Guan et al. [65]. The analyses were performed on an Agilent 7890A gas chromatograph equipped with a capillary column HP-INNOWAX (Agilent Technologies, Santa Clara, CA, USA; cross-linked polyethylene glycerol, i.d. 0.25 μm film thickness, 30 m by 0.25 mm) coupled to an Agilent 5975C MSD single quadrupole mass spectrometer operated under electron ionization mode at 70 eV in the scan range of 50 to 500 m/z. The helium flow rate was set to 1 ml·min -1 . The oven temperature was controlled initially at 40°C for 4 min, then increased at the rate of 10°C per min to 250°C, and held for 15 min. The injecting temperature was set to 280°C with the injection volume of 1 μl under splitless injection conditions. Under these conditions, the previously reported thermal degradations of αand β-hydroxy fatty acids to form alkenes (the minor products of OleT JE catalyzed reaction) in the GC inlet [16] were not observed (Additional file 9: Figure S8), making the silylating protection of the hydroxyl group unnecessary if only caring about the α-alkene products. To detect αand β-hydroxy fatty acids, samples were derivatized with an equal volume of N, O-bis(trimethylsilyl)trifluoroacetamide with 1% trimethylchlorosilane at 70°C for 15 min. GC-MS analysis followed the previous protocol developed by Rude et al. [16] except for using the Agilent J&W DB-5 MS column (i.d. 0.25 μm film thickness, 50 m by 0.25 mm). During GC-MS analysis, peak identity was determined by comparison of retention time and fragmentation pattern with authentic standard compounds where available and to the National Institute of Standards and Technology, USA mass spectral database. The location of double bond(s) in α-olefins was deduced by derivatization with dimethyl disulfide as described previously [66].
Quantification was achieved by comparison of integrated peak areas with calibration curves of authentic standards. The conversion percentages of free fatty acids to corresponding α-alkenes were estimated using the equation: [total alkenes]/([total alkenes] + [total free fatty acids]).