Production of high-concentration n-caproic acid from lactate through fermentation using a newly isolated Ruminococcaceae bacterium CPB6

Background n-Caproic acid (CA), as a medium-chain carboxylic acid, is a valuable chemical feedstock for various industrial applications. The fermentative production of CA from renewable carbon sources has attracted a lot of attentions. Lactate is a significant intermediate waste in the anaerobic breakdown of carbohydrates that comprise 18–70% of the chemical oxygen demand (COD) in municipal and some industrial wastewaters. Recently, researchers (including our own group) reported the CA production using lactate as electron donor with newly identified microbiome systems. However, within such processes, it was hard to determine whether the CA production was completed by a single strain or by the co-metabolism of different microorganisms. Results Here, we report the CA production using lactate as electron donor using the strain CPB6, which we isolated from a microbiome for CA production as described previously. Strain CPB6 is affiliated with Clostridium cluster IV of the family of Ruminococcaceae based on 16S rRNA gene sequence analysis. The strain prefers acidic initial pH condition (pH 5.0–6.5), and the temperature ranging from 30 to 40 °C for CA production. In a fed-batch fermentation with non-sterilized lactate-containing organic wastewater as feedstock, strain CPB6 produced 16.6 g/L CA (from 45.1 g/L lactate) with a maximum productivity of 5.29 g/L/day. Enzyme assays with crude cell extract showed that CPB6 can metabolize acetate and butyryl-CoA to produce n-butyric acid, and acetate/n-butyrate and caproyl-CoA to produce CA, respectively. Conclusion This study demonstrated that high concentration of CA production can be obtained by a newly isolated pure culture CPB6. This strain can be employed as a powerful workhorse for high-efficient CA recovery from lactate-containing waste streams. Our preliminary investigation suggested that the CA production from lactate in strain CPB6 might be via the chain elongation pathway of the reverse β-oxidation; the detailed mechanism, however, warrants further investigation using various molecular microbiology techniques. Electronic supplementary material The online version of this article (doi:10.1186/s13068-017-0788-y) contains supplementary material, which is available to authorized users.


Background
Medium-chain carboxylic acid, n-caproic acid (CA), is a valuable platform chemical for various industrial applications, including as a chemical precursor for producing flavor compounds and aviation fuels [1,2]. In addition, CA has the potential to be used as a natural antimicrobial agent [3]. Up to now, the primary mechanism for CA formation in the fermentation is through the chain elongation (reverse β oxidation), in which functional microbes elongate acetate/n-butyrate (butyrate hereafter, unless otherwise indicated) with two carbons (acetyl-CoA, being derived from ethanol) each time, to convert them into chemicals with six or above carbons,

Open Access
Biotechnology for Biofuels in sequence [4,5]. Due to the low solubility and thus easy separation, the recovery of CA from organic wastes has been emerged as a popular strategy for organic waste treatment, where macromolecules are firstly decomposed into short-chain carboxylates, e.g., acetate and butyrate, which are then converted into CA with ethanol supplemented as electron donor [6][7][8][9][10].
Lactate is an important intermediate in the anaerobic breakdown of carbohydrates that comprise ~18% of the chemical oxygen demand (COD) in municipal wastewaters and up to ~70% of the COD in some food processing wastewaters [11][12][13][14]. The conversion of lactate to CA had been described in pure culture studies using Megasphaera elsdenii [15] and reactor systems [16,17]; however, the CA production from lactate was not suitable to be considered as an effective and worthwhile approach for organic waste treatment, because the CA produced was only the negligible byproduct with low titer (<1.0 g/L) beside propionate or butyrate as the main product. Recently, we reported a unique microbiome that is predominated by Clostridium cluster IV, which can efficiently convert lactate into high level of CA as the primary product [18]. In batch fermentation with sufficient lactate addition, the maximum CA titer reached up to 23.4 g/L, with a CA productivity of 2.94 g/L/day. Soon afterwards, Kucek et al. [14] developed a continuous process to produce CA from lactate using a microbiome dominated by Acinetobacter spp. At a hydraulic retention time (HRT) of 1.5 days, a CA productivity of 3.03 g/L/day was reached. These results together demonstrated that besides ethanol, lactate, which is often present in various organic wastes, can also be used as an electron donor and carbon source for high production of CA.
Up to now, M. elsdenii is the only pure culture known to be capable of converting lactate into CA [15,19]. However, in none of the above cases for CA production from endogenous lactate [14,18,20], M. elsdenii was detected. So, M. elsdenii was not likely the main strain that is responsible for the lactate-to-CA conversion in these processes. In order to gain a further insight into these processes and achieve a further development of this new technology, it is desirable to isolate and metabolically characterize the key microorganism contributing to these processes from these reactor microbiome systems.
In this study, we isolated a bacterial strain CPB6 (belongs to Clostridium cluster IV of the family Ruminococcaceae) from the reactor microbiome capable of producing high concentration of CA from lactate [18]. We investigated the effects of various operational parameters on the CA production efficiency by CPB6. We further demonstrated CA production using this strain from real wastewater containing high concentration of lactate under non-sterilized and sterilized conditions. Finally, the metabolic mechanism of this new process was also explored preliminarily.

Culture morphology and phylogeny
After a series of continuous purification, a lactate-utilizing and CA-producing strain CPB6 was isolated from the fed-batch reactor microbiome described previously [18]. After a 3-day incubation on the agar plate at 30 °C, the colonies of the anaerobic bacterium strain CPB6 displayed white circular smooth colonies with a diameter of 1-2 mm. In liquid culture, microscopic analysis revealed that strain CPB6 was short, rod-shaped, spore-forming bacteria of 1.5-3.0 μm length and approximately 0.5 μm width (Additional files 1, 2: Figure S1).
We sequenced the 16S rRNA gene of the strain (Gen-Bank accession No. KM454167) (Additional file 1). Based on the sequence analysis, the CPB6 strain was affiliated with Clostridium cluster IV of the family of Ruminococcaceae (Fig. 1). The strain generally showed low sequence similarity with the existing strains whose 16S rRNA sequences are included in GenBank. When compared to the type species in the GenBank, it was closest to Clostridium leptum and Clostridium sporosphaeroides with 92.6 and 91.7% similarity of 16S rRNA sequence, respectively. While compared to the well-known CA-producing bacteria, it showed generally low similarity with Clostridium kluyveri (82.4%) and Megasphaera elsdenii (75.7%), but higher similarity with Clostridium sp. BS-1 (93.6%). The phylogenetic analysis implicated that CPB6 might belong to a new clade (genus) of the family Ruminococcaceae.
Strain CPB6 can utilize lactate to produce CA as the main product As shown in Fig. 2, the concentration of CA increased in parallel with the continuous consumption of d, l-lactate. Then CA concentration reached the plateau after the exhaustion of lactate on the 6th day of the fermentation, with 8.07 g/L of CA generated from 24.85 g/L of lactate. From the 4th day of the fermentation, butyrate started to accumulate and reached approximately 0.75 g/L by the end of the fermentation. No propionate was detected while only negligible acetate was generated during the fermentation. These results indicated that the strain CPB6 can utilize d, l-lactate to produce CA as the main product.
Other lactate-utilizing bacteria reported in previous studies generally fermented lactate to short-chain fatty acids (SCFAs), e.g., butyrate and propionate [21,22]; few can synthesize medium-chain fatty acids (MCFAs), e.g., CA [15]. For example, Clostridium leptum is the type strain of the closest relative species to strain CPB6. It is also a lactate utilizer, but it only produces butyrate, rather than CA, from lactate [23]. Megasphaera elsdenii is the only type strain that can produce CA from lactate, but in this case, CA is only a byproduct alongside the main metabolites including butyrate, propionate, and valerate [15,24,25]. The final CA titers were usually very low from the fermentation with either the pure culture of M. elsdenii or with a microbiome part of which was composed of M. elsdenii [17]. Here, the final CA concentration from the fermentation with strain CPB6 is >30 times higher than that was reported with M. elsdenii (8.07 versus 0.23 g/L [15]). Therefore, strain CPB6 is concluded as a novel key isolate that can efficiently convert lactate to CA as dominated product.

Effect of initial pH on CA production from lactate
The pH of fermentation is a crucial factor influencing the CA production by affecting the concentration of the undissociated CA. It was reported that, at pH 5.5, when the concentration of the undissociated CA exceeds 0.79 g/L (7 mM), it will significantly inhibit the activity of microbial cells [10]. The effect of pH on CA production by strain CPB6 was illustrated in Fig. 3 and Additional file 2: Figure S2, respectively. When the initial pH of the fermentation ranged from 5.0 to 6.5, about 1.80 g/L CA was produced as the primary end product. No obvious difference was observed in terms of the final CA titer and production rate (Fig. 3b). In addition, the range of initial pH from 5.0 to 6.5 was also very favorable for CPB6 cell growth (Additional file 2: Figure S2A), which was an important reason for high CA production at this pH range. However, as the initial pH of fermentation was adjusted to 7.0, 7.5, or 8.0, less lactate (0.80, 0.96, and 0.95 g/L, respectively) was consumed with little amount of CA (0.32, 0.25, and 0.17 g/L, respectively) being produced (Fig. 3c). It was observed that the strain experienced a long lag phase about 2 days, and reached a much lower maximum cell density (Additional file 2: Figure S2A). The CA production rate at initial pH conditions of 5.0-6.5 was almost the same, but it decreased to much lower levels when the initial pH was increased to 7.0-8.0 (Additional file 2: Figure S2C). In addition, the accumulation of butyrate, an undesirable byproduct decreasing the yield of CA, was decreased from 0.28 to 0.05 g/L with the initial pH increased from 5.0 to 6.5, as shown in Fig. 3d. Trace amounts of butyrate were produced when the initial pH was higher than 7.0.
In contrast to strain CPB6, other CA-producing bacteria exhibit higher CA titers under neutral conditions [6,26,27]. A mixed culture dominated by C. kluyveri produced much more CA at pH 7.0 than at pH 5.5 [6]. The lactate-utilizing CA-producing strain M. elsdenii also prefers neutral conditions [15]. M. elsdenii produces more CA when pH is maintained at 7.0 than when pH is uncontrolled with glucose as the substrate [27]. Choi et al. [28] demonstrated that M. elsdenii prefers neutral conditions to acidic conditions with sucrose as the substrate. Clostridium BS-1, a member of Clostridium cluster IV, also requires neutral pH to convert d-galactitol to CA [29]. However, in organic waste fermentation, some studies of CA production by reactor microbiomes have chosen to control the pH at 5.5 or even lower to eliminate competition from acetoclastic methanogens, which exhibit greater growth under neutral conditions, or to regulate the metabolic pathway toward chain elongation rather than the acrylate pathway [10,14]. The efficiency of CA production in mixed culture is negatively affected by the lower pH control strategy compared to that of a pure culture for two reasons: (1) the decreased activity of CA producers; (2) the increased concentration of toxic undissociated CA, particularly without in-line extraction [1,10,14]. However, strain CPB6, the dominant bacterium in CA-producing mixed cultures, might represent a smart solution to eliminating these two problems due to its initial acid preference and the significant increase in pH during CA production (Additional file 2: Figure S3), circumventing competition from other bacteria, such as acetoclastic methanogens and the toxicity of undissociated CA as CA accumulates.

Effect of temperature on CA production from lactate
The effect of temperature on lactate fermentation by strain CPB6 was investigated under 20, 30, 40, and 50 °C. Strain CPB6 could grow at 20 °C, but very little CA (0.14 g/L) was produced. By contrast, 1.84 and 1.86 g/L of CA were obtained at 30 and 40 °C, respectively (Fig. 4b), which was well in accordance with the good cell growth under these conditions (Additional file 2: Figure S2B). Correspondingly, the CA production rate was found to be pretty similar for 40 °C and 30 °C (Additional file 2: Figure S2D). Meanwhile, butyrate production at 30 °C was slightly higher than that at 40 °C (Fig. 4d). Only slight cell growth was observed when the temperature was increased to 50 °C, resulting in negligible CA and butyrate production ( Fig. 4; Additional file 2: Figure S2B). The tested temperature response of the strain CPB6 clearly indicated that it prefers the temperature ranging from 30 to 40 °C for growth and CA production. Similarly, most other CA producers are mesophilic, e.g., C. kluyveri [30] and M. elsdenii [15], as reported previously.

High level of CA production from lactate-containing wastewater
Further experiment was conducted to investigate whether the strain CPB6 can be employed to recover CA from real wastewater. As shown in Fig. 5, with an initial fermentation cycle and a further wastewater replenishment, a final CA concentration of 16.6 g/L was obtained with rapid consumption of lactate in the wastewater. The maximum CA productivity was 5.29 g/L/day, which was nearly two times higher than the results from our previous report when mixed culture was used [18]. The control reactor with sterile wastewater showed a production of CA of 15.9 g/L with a maximum productivity of 5.63 g/L/day (Additional file 2: Figure S4). These results indicated that CA can be recovered from waste streams with the pure culture of strain CPB6 under non-sterilized conditions. Furthermore, no significant propionate or butyrate accumulation was observed (Fig. 5), which is different from other well-known CA producers. This also explains why a high CA yield from lactate can be obtained with strain CPB6.

Effects of acetate and butyrate supplementation on CA production from lactate
In the production of CA via chain elongation (reverse β oxidation) in many microorganisms as discussed above, acetate can serve as the starting substrate, while butyrate can be either the starting substrate or as an intermediate product (Table 1). In strain CPB6, butyrate production was also detected when lactate was used as the electron donor for CA production. So, here we tested the effects of acetate and butyrate supplementation on CA production in strain CPB6.
As shown in Fig. 6, when either acetate or butyrate (besides lactate) was supplemented to the fermentation, strain CPB6 simultaneously used lactate and acetate or lactate and butyrate from the very beginning. Compared with the control reaction (only lactate is provided), the lag phase for the fermentation with acetate or butyrate supplementation was shortened from 24 to 12 h, indicating that acetate and butyrate can accelerate CA production significantly. Based on a carbon balance calculation for the fermentation, it was found that in the presence of acetate or butyrate, the lactate requirement for one mol of CA production reduced from 4.29 mol to 3.83 or 2.68 mol, respectively (Table 2). Meanwhile, the production of hydrogen decreased from 2.75 mol to 2.36 or Fig. 5 Caproic acid (CA) recovery from lactate-containing wastewater by strain CPB6 under non-sterilized conditions. The fermentation was started using the mixed wastewater as described in the "Methods" section. When the wastewater was depleted, additional wastewater was added to support the further CA production  [2]. Therefore, here we preliminarily deduced that the CA production from lactate in strain CPB6 might be also via chain elongation pathway.
In addition, we also conducted experiments with only acetate or butyrate as substrate without lactate added.
The results demonstrated that no caproate was produced (Additional file 2: Figure S5). This indicated that acetate or butyrate can be supplemented to lactate for CA production in the strain CPB6, but itself (acetate or butyrate) cannot serve as the sole carbon source for this microorganism.

Key reactions and enzymes for CA production
There is no previous reference demonstrating that lactate can be converted into CA through the chain elongation pathway. In the chain elongation pathway in C. kluyveri, acetoacetyl-CoA, 3-hydroxybutyryl-CoA, crotonyl-CoA, and butyryl-CoA are intermediates for butyrate formation [5], while 3-keto-caproyl-CoA, 3-hydroxyhexanoyl-CoA, hex-2-enoyl-CoA, and caproyl-CoA are intermediates for CA production [2,32]. According to the literature [2,33], there are two possible reactions for CA production (which were actually inferred from reactions for butyrate production): (1) caproyl-CoA + acetate → caproate + acetyl-CoA; (2) caproyl-CoA + butyrate → caproate + butyryl-CoA. Here, we thus further carried out enzyme assays to investigate whether the last key reactions for CA production exist in strain CPB6 (   (Table 3), while the control test showed no butyrate production. It further indicated the existence of the enzyme butyryl-CoA: acetate CoA transferase in strain CPB6. In addition, our experiments illustrated that the CA production rates were 3.5 and 2.3 times higher than that of the butyrate production (Table 4), respectively, which could well explain why CA was always the predominant product in the fermentation with strain CPB6. Based on these results, we propose that the pathway for CA production from lactate in strain CPB6 might be similar to the reverse β-oxidation pathway used for the conversion of ethanol to CA. That is, lactate is converted to acetyl-CoA and this process provides energy to promote the chain elongation (Fig. 7). Although this looks highly logical based on our results from this study, it warrants further investigation through more systematic transcriptomic analysis, isotope-labeled flux analysis, or genetic engineering manipulation. Such attempts are currently underway in our laboratory.

Conclusion
We reported a newly isolated Ruminococcaceae bacterium CPB6, which can use lactate as the feedstock to produce CA as the main product. The CA production capability (final titer, selectivity, and productivity) is much higher than the other reported CA-producing pure cultures. Strain CPB6 prefers acidic initial condition (pH 5.0-6.5) for CA production, and has the optimum growth at the temperature ranging from 30 to 40 °C. High concentration of CA (16.6 g/L) was attained from lactate-containing wastewater by strain CPB6 in fed-batch fermentation under nonsterilized condition, with a maximum CA productivity of 5.29 g/L/day. Both acetate and butyrate are likely involved in the formation of CA from caproyl-CoA, but the activity of caproyl-CoA:acetate CoA transferase is higher than that of caproyl-CoA:butyrate CoA transferase. Lactate is an important intermediate in the anaerobic digestion of wastewaters containing high COD loading from various municipal or industrial processes. Moreover, lactate is also a ubiquitous liquid product easily obtained from lignocellulosic resource and other low-cost feedstock such as corncob molasses. Given the excellent CA production capability of strain CPB6 from non-sterilized lactate-containing wastewater, it can be considered as a promising workhorse for recovering value-added bioproducts from waste streams.

Medium and strain isolation
Strain CPB6 was isolated by using culture plates (15 g/L agar was supplemented besides the fermentation medium, see below) from 10 −3 to 10 −5 dilutions of the unique microbiome_ENREF_11 that can produce CA from lactate as we reported [18]. The formation of CA was examined in an anaerobic fermentation medium containing d, l-lactate as the sole energy source at 30 °C. The ingredients in the fermentation medium included (per L): d, l-sodium lactate 4.8 g, KH 2 PO 4 1.4 g, (NH 4 ) 2 SO 4 0.6 g, KCl 1.5 g, MgCl 2 0.32 g, CaCl 2 0.15 g, selenite-tungstate solution 1.0 mL, yeast extract 1.0 g, l-cysteine 0.25 g, Na 2 S·9H 2 O 0.25 g, and resazurin 0.5 mg. In addition, 1.0 mL of trace element stock solution was also supplemented into the 1 L medium [18]. The pH of the medium  was adjusted to 5.5 before sterilization. The fermentation medium was flushed with nitrogen gas for 20 min to remove trace amount of oxygen and then sterilized at 121 °C and 0.1-0.15 MPa for 20 min. After autoclaving, 1.0 mL of vitamin stock solution from an anoxic and filter-sterilized stock solution was added [18]. The same procedure was employed for all following fermentation experiments for oxygen removal and sterilization before inoculation.

Effects of initial pH and temperature on CA formation from lactate
Batch experiments were performed in 150-mL serum bottles containing 50 mL of fermentation medium. To study the effects of pH on CA production, the pH value of the fermentation medium was adjusted before inoculation to 5.0, 5.5, 6.0, 6.5, 7.0, 7.5, and 8.0, respectively, by adding 2 M sterile HCl or NaOH. The preculture of CPB6 was first cultivated for 3 days in a seed medium containing the following reagents (per L): peptone 1.25 g, yeast extract 1.25 g, dextrose 3.0 g, NaCl 0.08 g, l-cysteine-HCl × H 2 O 0.25 g, KCl 1.5 g, MgSO 4 ·7H 2 O 0.008 g, CaCl 2 0.008 g, K 2 HPO 4 0.08 g, NaHCO 3 0.4 g, vitamin K 1 0.005 g, and Hemin 0.0125 g (adjusted to pH 5.5 before inoculation). Then, 2.5 mL of the preculture was inoculated into the main fermentation medium with approximately 1.5 g/L of acetate supplemented as electron acceptor, the headspace of which was filled with 100% N 2 . The fermentation culture was incubated at 30 °C in a rotating shaker with a shaking rate of 180 rpm.
To investigate the effects of temperature on CA production, the fermentation culture was prepared similarly as described above (but all started with pH 5.5) and incubated at 20, 30, 40, or 50 °C, respectively. Both experiments were performed in triplicate.

Using real wastewater as carbon source for CA production
The food wastewater used in this study was collected from the fermentation pit of a liquor brewing factory located in Sichuan, China. The main characteristics of this wastewater were pH 3.8 ± 0.2, lactate 116.8 ± 4.2 g/L, acetate 1.5 ± 0.08 g/L, butyrate 1.0 ± 0.02 g/L, glucose Proposed metabolic pathways for butyrate and caproic acid (CA) formation in strain CPB6. This was extended and modified from previous models for CA production [2,5] with the combination of lactate oxidation and chain elongation. Pathways were also included here indicating that CA could be formed from condensation of either acetate and caproyl-CoA or butyrate and caproyl-CoA 15.6 ± 2.2 g/L, and ethanol 20.5 ± 2.9 g/L. The municipal wastewater used in this study was collected from the influent of a wastewater treatment plant located in Sichuan, China. The main characteristics of this wastewater were TCOD (total chemical oxygen demand) 270-310 mg COD/L, SCOD (soluble chemical oxygen demand) 170-215 mg COD/L, acetate 50-80 mg COD/L, TN (total nitrogen) 26-37 mg/L, and TP (total phosphorus) 3.0-5.5 mg/L, pH 7.4-7.6. The food wastewater and municipal wastewater were mixed at a 1:3 volume ratio. The final pH was adjusted to 5.5 with 2 M HCl and 2 M NaOH. Without oxygen removal and sterilization, the preculture strain CPB6 was inoculated into the mixed wastewater at an inoculum volume ratio of 5%. Meanwhile, as a control, the same fermentation was also conducted using autoclave-sterilized wastewater. The experiment was performed in a 150-mL serum bottle with 50 mL fermentation medium at 30 °C with an agitation rate of 180 rpm. The experiment was performed in triplicate. When the lactate in the fermentation broth was used up (after about three days), fresh mixed wastewater (the autoclaved wastewater was used for the control) was supplemented into the fermentation, making lactate concentration up to approximately 15 g/L. Then the fermentation was kept running for about another three days until the end. The operational conditions (including inoculum ratio, fermentation volume, temperature, agitation rate, triplicate) were all kept the same for the following experiments unless otherwise indicated.

Effects of acetate and butyrate on CA formation from lactate
In order to investigate the effects of acetate and butyrate on CA production, experiments were carried out with following three different compositions as the main organic carbon sources: 5 g/L lactate (Group 1), 5 g/L lactate + 5 g/L acetate (Group 2), and 5 g/L lactate + 5 g/L butyrate (Group 3).

Enzymatic assays with crude cell extract
Enzymatic assays with crude cell extract were performed to verify the existence of several key reactions and relative enzymes in the chain elongation pathways in strain CPB6. For each assay, cells of 1.5 mL preculture with an OD 600 of 0.8 were washed with 1× PBS solution (pH 5.5) for three times, and crude cell extract was prepared from the cells using CelLytic B reagent (Sigma-Aldrich Corporation, St Louis, MO, USA) following the manufacturer's instruction. The assays were conducted at 35 °C in 1.5-mL sealed centrifuge tubes containing substrates as listed below: caproyl-CoA (Sigma-Aldrich) + acetate, caproyl-CoA + butyrate, and butyryl-CoA (Sigma-Aldrich) + acetate. The final concentration of each substrate was 4.0 mM. Then ATP (Sigma-Aldrich) was added into the reaction with a final concentration of 0.2 mM. Control tests were also conducted at the same time following the same procedure but crude cell extract was replaced with the same amount of 1× PBS solution. All these tests were performed in triplicate in an anaerobic chamber (BactronEZ, Shellab, USA) which was kept under anaerobic condition all the time with mixed gases (CO 2 : H 2 : N 2 = 5:5:90). Reaction rates for the tests were calculated based on the amount of CA/butyrate generated or the amount of butyrate/acetate consumed within 12 h.

Analytical methods
Liquid samples were collected regularly from each experiment and centrifuged for 5 min at 10,000 rpm. The supernatants were then diluted fivefold with distilled water and filtrated through 0.22-μm filter (Millipore Corp., Bedford, MA). Carboxylates (C1-C6), lactate, glucose, and ethanol concentrations were determined using an HPLC (Agilent 1260 Infinity, USA) equipped with a differential refraction detector (RID) and a Hi-Plex H column (300 × 6.5 mm) [18] _ENREF_11. Hydrogen, carbon dioxide, and methane were measured using an Agilent 6890 gas chromatography (GC) system (Agilent Technologies, USA) with a thermal conductivity detector (TCD) and a 2-m stainless steel column packed with Porapak Q (50/80 mesh)_ENREF_11 [18].
Author's contributions XYZ planned and analyzed the results, and wrote the manuscript. YT conceived and designed the study, and revised the manuscript. YZ and TTW performed the experiments and calculations. YW, XZL, and DPL participated in the planning and coordination of the study, and revised the manuscript. All authors read and approved the final manuscript.

Additional files
Additional file 1. Materials and methods.
Additional file 2: Figure S1. SEM image of Ruminococcaceae bacterium CPB6. Figure S2. Effects of pH and temperature on strain CPB6 growth and its influence on caproate production rate at 96 h: growth A (pH) and B (temperature); caproate production rate: C (pH) and D (temperature). Figure S3. pH values before and after the reaction. Figure S4. Caproic acid (CA) recovery from lactate-containing wastewater by strain CPB6 under sterilized conditions. The fermentation was started using the mixed wastewater as described in the Materials and Methods section. When the wastewater was depleted, additional wastewater was added to support the further CA production. Figure S5. Fermentation profiles of strain CPB6 when acetate (A) and butyrate (B) was used as the sole carbon source (without lactate provided).