Production of galactitol from galactose by the oleaginous yeast Rhodosporidium toruloides IFO0880

Background Sugar alcohols are commonly used as low-calorie sweeteners and can serve as potential building blocks for bio-based chemicals. Previous work has shown that the oleaginous yeast Rhodosporidium toruloides IFO0880 can natively produce arabitol from xylose at relatively high titers, suggesting that it may be a useful host for sugar alcohol production. In this work, we explored whether R. toruloides can produce additional sugar alcohols. Results Rhodosporidium toruloides is able to produce galactitol from galactose. During growth in nitrogen-rich medium, R. toruloides produced 3.2 ± 0.6 g/L, and 8.4 ± 0.8 g/L galactitol from 20 to 40 g/L galactose, respectively. In addition, R. toruloides was able to produce galactitol from galactose at reduced titers during growth in nitrogen-poor medium, which also induces lipid production. These results suggest that R. toruloides can potentially be used for the co-production of lipids and galactitol from galactose. We further characterized the mechanism for galactitol production, including identifying and biochemically characterizing the critical aldose reductase. Intracellular metabolite analysis was also performed to further understand galactose metabolism. Conclusions Rhodosporidium toruloides has traditionally been used for the production of lipids and lipid-based chemicals. Our work demonstrates that R. toruloides can also produce galactitol, which can be used to produce polymers with applications in medicine and as a precursor for anti-cancer drugs. Collectively, our results further establish that R. toruloides can produce multiple value-added chemicals from a wide range of sugars.

Recently, R. toruloides was also found to produce arabitol, a five-carbon sugar alcohol from xylose, suggesting that it may be a promising host for sugar alcohol production [5]. In particular, R. toruloides can grow on a wide range of sugars and can be cultured at high cell densities (> 100 g/L dry cell weight) in fermenters [17-19, 21, 27-29]. In these regards, R. toruloides potentially enables a flexible production process where sugar alcohols and lipid-based chemicals can be coproduced.
Motivated by the previous arabitol finding, we tested whether R. toruloides is able to produce sugar alcohols from arabinose, cellobiose fructose, galactose, glucose, glycerol, mannose, or sucrose. Among the substrates tested, we observed sugar alcohol production only during growth on galactose, where the cells produced galactitol. We further characterized the pathway involved in galactitol production and identified the critical aldol reductase. Galactitol, in addition to being a low-calorie sweetener, has also been used to produce polymers, with potential applications in drug delivery and tissue engineering [30][31][32]. In addition, dianhydrogalactitol, a product of galactitol, can be used to treat a variety of cancers [33][34][35][36]. Collectively, this work suggests that R. toruloides can be used to produce this valuable sugar alcohol.

Rhodosporidium toruloides produce galactitol during growth on galactose in nitrogen-rich medium
To determine whether R. toruloides IFO0880 produces any sugar alcohols in addition to arabitol, we measured growth on arabinose, cellobiose, fructose, galactose, glucose, glycerol, mannose, and sucrose in nitrogen-rich medium, the same based medium that induces arabitol production during growth on xylose (Fig. 1). Cells were able to completely consume glucose, fructose, galactose, and mannose after 48 h of shake flask growth. Likewise, cells were able to consume almost 20 g/L sucrose, arabinose, and glycerol after 72 h of shake flask growth. Growth on cellobiose was very slow as compared to the other sugars.
Only during growth on galactose did we observe potential sugar alcohol production as determined by high performance liquid chromatography (HPLC). Analysis of the HPLC chromatogram indicated the presence of an additional metabolite produced by R. toruloides (Additional file 1: Figure S1). This metabolite was identified as d-galactitol by gas chromatography-mass spectrometry (GC-MS) and proton nuclear magnetic resonance spectroscopy ( 1 H-NMR) (Additional file 2: Figure S2 and Additional file 3: Figure S3). We next measured the concentration of d-galactitol during growth of R. toruloides on galactose in nitrogenrich medium. d-galactitol was produced at all galactose concentrations tested (Fig. 2). When the initial galactose concentration was 20 or 40 g/L, galactitol production peaked at concentrations of 3.2 ± 0.6 g/L, and 8.4 ± 0.8 g/L, respectively, after 120 h of growth. When the initial galactose concentration was 60 g/L, 8.2 ± 1 g/L of galactitol was produced after 96 h of growth. However, we found that the galactose was not completely consumed when the initial galactose concentration was 60 g/L. This would explain why the galactitol titers were similar during growth on 40 g/L and 60 g/L galactose.
The maximum galactitol production rate and yield were 0.061 g/L/h and 0.22 g/g, respectively (Additional file 11: Table S1). We observed maximal optical densities of 34.5 ± 2, 43.5 ± 2, and 53 ± 6 during growth on 20, 40, and 60 g/L galactose, respectively. We also tested whether R. toruloides was able to consume galactitol during growth in nitrogen-rich medium. No consumption was detected (Additional file 4: Figure S4).

Lipids and galactitol can be produced as co-products
Oleaginous yeasts are routinely used as hosts for producing lipids from sugars. Lipid production in oleaginous yeast is induced by starving the cells of some essential nutrient, most commonly nitrogen. The results above demonstrate that R. toruloides can be used to produce galactitol. They also suggest that R. toruloides can be used to simultaneously produce lipids and galactitol, both valuable products. To test this hypothesis, we grew cells in nitrogen-poor medium with 20, 40, or 60 g/L galactose. d-galactitol was produced during growth in nitrogenpoor medium at the three galactose concentrations tested (Fig. 3). When the initial galactose concentration was 20 g/L, galactitol titers were 3.0 ± 0.3 g/L after 144 h of growth. When the initial galactose concentrations were 40 or 60 g/L, galactitol titers were 5.2 ± 0.5 g/L and 7.4 ± 0.8 g/L, respectively, after 144 h and 192 h of growth. However, we found that galactose was not completely consumed in nitrogen-poor medium when the initial galactose concentration was 40 g/L or 60 g/L. The maximum galactitol production rate and yield were 0.028 g/L/h and 0.136 g/g, respectively, during growth in nitrogen-poor medium (Additional file 11: Table S1).
We also analyzed the lipid content and composition in cells grown on 40 g/L galactose in nitrogen-poor and nitrogen-rich medium. In nitrogen-poor medium, the final dry cell weight was 3.1 g/L and lipid content was 45% (Fig. 4a). In nitrogen-rich medium, the final dry cell weight was 10.5 g/L and lipid content was 5%. We also analyzed the composition of the lipid by fatty acid methyl ester analysis using GC-MS. The fatty acids were predominantly oleic (C18:1) and palmitic (C16:0) acid, with some stearic (C18:0) acid during growth on nitrogen-poor and nitrogen-rich medium (Fig. 4b). Similar compositions were observed during growth on glucose and xylose [5,21].
We examined the expression of the genes in the Leloir pathway using quantitative PCR during growth in nitrogen-rich medium containing 2% glucose or 2% galactose ( Fig. 6 and Additional file 11: Table S2). All the genes were expressed during growth on galactose. Many were also expressed during growth on glucose, though the relative expression level was often lower. This would suggest that galactose gene expression is subject to glucose catabolite repression, similar to what is observed in S. cerevisiae [41,42]. However, the relative decrease in expression is not statistically significant due to variable levels of expression. Only in the case of aldose reductase (AldR) did we observe strong repression, as we were unable to detect expression during growth on glucose. In addition, we found that galactose-1-phosphate uridyl transferase (UT) expression was higher during growth on glucose than on galactose, a result we cannot explain.

Characterization of galactose reductase from R. toruloides
According to the proposed pathway ( Fig. 5), an aldose reductase, AdhR, is directly involved in producing galactitol. We expressed and purified a codon-optimized version of the enzyme in E. coli (Additional file 11: Table S3). AldR gene encodes a polypeptide 290 amino acids in length, with a calculated molecular mass of 32.4 kDa. The molecular weight of the recombinant enzyme was approximately 32 kDa, as determined by SDS-PAGE (Additional file 5: Figure S5). The recombinant enzyme exhibited activity against galactose with NADPH as the coenzyme; no activity was detected with NADH. Thus, AldR is an NADPH-dependent enzyme, like other galactose reductases [43][44][45]. Next, we determined the optimal pH and temperature for enzyme activity. These were found to be pH 7 and 25 °C (Additional file 6: Figure S6).
We next tested the relative activity of AldR on galactose, glucose, and xylose. AldR showed activity on galactose and xylose in the presence of NADPH as the coenzyme (Fig. 7). Among the tested substrates, AldR showed the highest activity on galactose. However, it also exhibited activity on xylose. AldR showed no activity on glucose. Recombinant AldR was then employed to produce galactitol from galactose. Authentic galactose and galactitol were used as controls, and the AldR reaction product was analyzed using HPLC. The product had the same retention time as galactitol (Additional file 7: Figure S7). In the control experiment without AldR enzyme, we did not observe galactitol production or galactose consumption. Collectively, these results suggest that AldR is directly involved in galactitol production.

Analysis of intracellular metabolites
As far less is known about the growth of R. toruloides on galactose than on glucose, we compared the relative concentrations of 50 intracellular metabolites using GC-MS during exponential growth. Among the 50 metabolites analyzed, differences in the concentrations of 29 metabolites were observed during growth on galactose versus glucose (Fig. 8, Additional file 8: Figure S8, Additional file 11: Tables S4, S5).
We observed intracellular galactitol production when R. toruloides was grown on galactose. No intracellular galactitol production was observed during growth on glucose. (Additional file 9: Figure S9). We also observed decreased concentrations of the storage metabolite trehalose (0.5×), TCA intermediate citric acid (0.7×), and glycolytic intermediate glycerol 3-phosphate (0.8×) as compared to growth on glucose (Additional file 10: Figure S10). This is consistent with lower metabolic fluxes associated with galactose utilization. Aside from these more obvious changes, we also observed changes in many additional metabolites that elude simple explanations. What these results do show is that galactose utilization induces many changes to central metabolism as compared to glucose metabolism.

Discussion
Rhodosporidium toruloides IFO0880 is capable of growing on multiple sugars. Previous work found that R. toruloides produces d-arabitol during growth on xylose in nitrogen-rich medium [5]. In this study, we investigated whether R. toruloides produces any additional sugar alcohols. The key finding of the present study is that R. toruloides also produces galactitol at relatively high titers (> 8 g/L) during growth on galactose. As galactitol is a valuable product in its own right, these results indicate that R. toruloides can be used not only to produce lipidbased chemicals but also this sugar alcohol as well.
Rhodosporidium toruloides produces galactitol in both nitrogen-rich and nitrogen-poor medium. In the Fig. 4 Intracellular lipid and FAME production by R. toruloides IFO0880 during growth in nitrogen-poor and nitrogen-rich medium with 40 g/L of galactose: a intracellular lipid content and dry cell weight for R. toruloides IFO0880. Solid diamonds and solid squares are used to denote dry cell weight of cells grown in nitrogen-poor and nitrogen-rich conditions, respectively. Solid inverted triangles and solid circles are used to denote lipid content of cells grown in nitrogen-poor and nitrogen-rich conditions, respectively. b Fatty acid composition as determined by GC-MS. Data show the mean and standard deviation resulting from two biological and two technical replicates previous d-arabitol study, arabitol was produced only during growth in nitrogen-rich medium [5]. During growth in nitrogen-poor medium, arabitol was not produced. Likely, this is because xylose was consumed very slowly in nitrogen-poor medium. These observations are consistent with d-arabitol being an overflow metabolite associated with redox imbalances in the cell arising from high fluxes through the xylose metabolic pathway during growth in nitrogen-rich medium [4]. In the case of galactose metabolism, galactitol is also likely an overflow metabolite as more is produced when galactose utilization rates are high, for example during growth in nitrogen-rich medium. However, galactitol production does not appear to be associated with any redox imbalances within the cell. More likely, it is produced to prevent the intracellular accumulation of galactose-1-phosphate, a phosphorylated intermediate of the Leloir pathway (Fig. 5), which is toxic to the cell [44,46]. The efficient utilization of galactose is limited by conversion of galactose-1-phosphate. Low expression of galactose-1-phosphate uridylyltransferase likely causes a buildup of galactose-1-phosphate in the cell. One way to relieve this buildup would be to produce galactitol [47]. Such a mechanism would explain why R. toruloides produces galactitol.
Galactitol has been produced using chemical routes based on hydrogenation [11]. It has also been reported that is produced by several yeast during growth on galactose [48,49]. In one notable study, thirteen yeasts were screened for galactitol production using galactose as a sole carbon source [49]. Six were found to produce galactitol. The highest titers were obtained with Candida polymorpha, which produced 18.7 g/L galactitol from 110 g/L galactose. These titers are greater than those obtained with R. toruloides. However, the key advantage of using R. toruloides is that it can also co-produce other valueadded chemicals, in particular lipids and lipid-based chemicals. In addition to yeast, the bacterium Mycobacterium smegmatis was found to produce 7 g/L galactitol from 10 g/L galactose and 10 g/L glucose [48]. This appears to be the only reported case of galactitol production in bacteria.
In addition to native production, S. cerevisiae has also been engineered to produce galactitol. In one study, the aldose reductase in S. cerevisiae was overexpressed. The resulting strain produced 9 mg/L of galactitol from 5 g/L galactose [50]. In another study, S. cerevisiae strain EJ4 was found to produce 0.40 g/L galactitol from 20 g/L galactose after 33 h of growth due to the promiscuous activities of heterologously expressed xylose reductase (XR) and xylitol dehydrogenase (XDH) [51]. This strain was also engineered to produce galactitol from lactose by deleting galactose kinase and heterologously expressing galactitol dehydrogenase [52]. It produced 3.5 g/L galactitol from 40 g/L of lactose, suggesting that lactose may also be a promising substrate for galactitol production.

Conclusions
Rhodosporidium toruloides has traditionally been viewed as a production host for lipids and lipid-based chemicals. Our work demonstrates that this oleaginous yeast can also produce galactitol at high titers during growth on galactose. These results suggest that R. toruloides potentially enables a flexible production process that can account for different market conditions by producing a wide range of value-added chemicals from simple sugars.

Strains, media, and growth conditions
Rhodosporidium toruloides IFO0880 was obtained from the NITE Biological Resource Center, Japan (NBRC 0880). YPD medium (10 g/L yeast extract, 20 g/L peptone, and 20 g/L glucose) was used for routine growth of R. toruloides. The two different media were tested for galactitol production by R. toruloides: nitrogen-rich medium (10 g/L yeast extract and 20 g/L peptone) and nitrogen-poor medium [0.75 g/L yeast extract, 1.7 g/L yeast nitrogen base without amino acids and ammonium sulfate, 0.1 g/L (NH 4 ) 2 SO 4 , and pH 5.6]. Stationary phase seed cultures were obtained by inoculating single colonies from YPD agar plate into 20 mL YPD liquid medium in 125 mL glass baffled shake flasks. The seed cultures were then used to inoculate 50 mL cultures in 250 mL glass baffled shake flasks with a starting OD 600 of 1. The cells were then grown at 30 °C and 250 rpm.

Determination of sugar and polyol concentrations
Sugar and galactitol concentrations were measured using a Shimadzu high-performance liquid chromatography (HPLC) system equipped with an RID-10A refractive index detector, an Aminex HPX-87H carbohydrate analysis column (Bio-Rad Laboratories), and a cation H microguard cartridge (Bio-Rad Laboratories). The column and guard cartridge were kept at 65 °C, and 5 mM H 2 SO 4 was used as a mobile phase at a constant flow rate of 0.6 mL/ min. Prior to analysis, culture samples were first pelleted and then the supernatant was passed through 0.22 μm polyethersulfone syringe filter. Peaks were identified and quantified by retention time comparison to authentic standards. Galactose and galactitol peaks were also measured and confirmed by gas chromatography-mass spectrometry (GC-MS). 200 μL of sample was dried under vacuum and derivatized with 50 μL of methoxyamine hydrochloride (40 mg/mL in pyridine) for 60 min at 50 °C, then with 150 μL of N-methyl-N-(trimethylsilyl)trifluoroacetamide plus 1% of trimethylchlorosilane at 70 °C for 2 h, and following 2 h incubation at room temperature. Chromatograms were acquired using a GC-MS system (Agilent) consisting of an Agilent 7890 gas chromatograph, an Agilent 5975 MSD and an HP 7683B autosampler. Gas chromatography was performed on a ZB-5MS (60 m × 0.32 mm I.D. and 0.25 mm film thickness) capillary column (Phenomenex). Inlet and MS interface temperatures were 230 °C, and the ion source temperature was adjusted to 230 °C. An aliquot of 1 mL was injected with a split ratio of 40:1. Helium carrier gas was kept at a constant flow rate of 2.4 mL/min. The temperature program was: 5 min isothermal heating at 70 °C, followed by an oven temperature increase of 5 °C per min to 310 °C and a final 10 min at 310 °C. The mass spectrometer was operated in a positive electron impact mode at 69.9 eV ionization energy at m/z 50-800 scan range. The spectra of all chromatogram peaks were evaluated using the AMDIS 2.71 (NIST) and authentic standards.
Galactitol peak was also confirmed by proton nuclear magnetic resonance ( 1 H-NMR) spectroscopy. Cells were grown for 72 h on 40 g/L galactose in nitrogen-rich media and centrifuged at 16,000×g for 10 min. 600 μL of supernatant was mixed with 10% deuterium oxide. All 1D proton spectra were collected at 25 °C on an Agilent 750 MHz VNMRS spectrometer equipped with a 5 mm triple-resonance indirect detection probe with Z PFG gradient capability [11]. The standard 1D presaturation pulse sequence was used, and water suppression was achieved with a low CW power irradiated at water resonance for 1.5 s. Each spectrum was collected with a 90° pulse angle of 10.5 ms, 32 scans and 2 s relaxation delay between scans. A solvent peak (H 2 O) was used as the chemical shift reference. Mnova 14.0.1 (Mestrelab Research) was used for spectral processing and analysis. Each spectrum was processed with 0.6 Hz line broadening, 4 times zero-filling, auto-phase and auto-baseline correction.

Lipid and dry cell weight measurements
Lipids were also measured using the modified sulphophospho-vanillin lipid assay [30,53,54]. The appropriate yeast suspension was centrifuged and then the cell pellet washed twice using sterile water. The washed cell pellet was mixed with 1 mL of 18 M sulfuric acid in a glass test tube and heated at 100 °C for 10 min in a dry heating bath. The reaction was cooled for 20 min in an ambient water bath. 2.5 mL of freshly prepared vanillin-phosphoric acid was added and reacted for 15 min at 37 °C. The test tube was cooled for 15 min in a water bath at ambient temperature. The absorbance of each reaction was measured at 530 nm against a reference sample prepared in water using the Tecan Infinite M1000 Pro microplate reader. Absorbance measurements were converted to lipid concentration using a calibration curve prepared using refined corn oil. Corn oil (100 mg) was dissolved in 2:1 chloroform:methanol (20 mL) and a stock solution was loaded into an assay mixture at 50-250 µg. A standard curve was run with each set. Vanillin-phosphoric acid solution was prepared freshly by dissolving 0.12 g vanillin in 20 mL dH 2 O, and adjusting the volume to 100 mL with 85% o-phosphoric acid. This assay was validated previously for various oleaginous yeast lipids, and common media ingredients were found to provide minimal interference [30,54].
Cell growth was measured by the optical absorbance at 600 nm (OD 600 ). Dry cell weights (DCW) were determined as follows. Culture samples (1 mL) were collected into pre-weighed tubes and centrifuged at 16,000×g for 5 min. Supernatant was discarded. Pellets were then washed twice with 50 mM phosphate buffered saline. Washed pellets were dried to constant weight at 65 °C for 24 to 48 h. The tubes were then weighed.

Measurement of fatty acid composition
Fatty acid compositions were determined by GC-MS. The fatty acids were first derivatized using the method of Lepage and Roy [55]. Briefly, lyophilized samples (1 mL) were first resuspended in 2 mL of a 20:1 mixture of methanol and acetyl chloride solution and 2 mL of hexane. 25 mg/mL tridecanoic acid dissolved in a 3:2 methanol:benzene mixture was then added (2.5 μL) as an internal standard. The mixture was then incubated in a dry bath at 100 °C for 30 min in a sealed glass tube with a screw cap. After cooling down in room temperature, 1 mL water was added to induce phase separation. This process generates fatty acid methyl esters from all the lipid compounds. The upper organic phase containing the fatty acid methyl esters was collected for analysis by GC/MS. Samples (2 μL) were injected at a 0:1 split ratio using hexane as a solvent. Helium carrier gas was used at a pressure of 121.7 kPa and a flow rate of 1.0 mL/min. The injection port temperature was set at 250 °C. Column temperature started at 30 °C and increased to 250 °C at a rate of 10 °C/min. Eluent from the GC entered an ionization chamber at 250 °C and was measured at a full scan between 15 and 250 amu. Species identity was verified by comparison of mass spectra to the analytical standards in the Sigma-Aldrich's FAME mix (C8-C24) and NIST mass spectral library. Fatty acid methyl esters were quantified by peak area. Four replicates were analyzed for each sample (obtained from two biological replicates and two technical replicates).

Quantitative PCR
Cells were harvested after 36 h of shake flask growth in YP medium containing glucose or galactose at 30 °C and then mechanically disrupted using acid-washed glass beads (425-600 μm) six times in a FastPrep-24 homogenizer with 6 m/s beating for 20 s. Total mRNA was then extracted using Qiagen's RNeasy Mini kit. Total mRNA (2 µg) was then treated with TURBO DNA-free DNase using the TURBO DNA-free kit (Ambion) to remove genomic DNA. cDNA was synthesized from mRNA using the Bio-Rad's iScript cDNA synthesis kit. The qPCR experiments were carried out using a Roche LightCycler 480 system with the SsoAdvanced Universal SYBR Green Supermix kit (Bio-Rad). Primers were designed using the online PrimerQuest tool provided by Integrated DNA Technologies and are listed in Additional file 11: Table S2. Endogenous actin gene (ACT , RHTO_03560) was used as an internal control. All data points were collected from three biological replicates.

Aldose reductase cloning and characterization
Cloning and protein expression were performed in Escherichia coli strains DH5 and BL21(DE3), respectively. E. coli was grown at 37 °C in Luria-Bertani (LB) medium (15 g/L yeast extract, 10 g/L tryptone, and 10 g/L NaCl). Kanamycin was used at a concentration of 40 μg/mL.
AldR was expressed from a T7 promoter using the plasmid pET-28(a). Primers used for this study are listed in Additional file 11: Table S2. R. toruloides IFO0880 genomic sequence (GenBank: LCTV02000005.1) was accessed from National Center for Biotechnology Information (http://www.ncbi.nlm.nih.gov), and the aldose reductase sequence (Protein Id: 11553 and transcript Id: 11681) was accessed from the JGI Genome Portal. Aldose reductase sequence was codon optimized by Integrated DNA Technologies for expression in E. coli (Gen-Bank accession number: MN057734; Additional file 11: Table S3). The overexpression vector was constructed first by PCR amplifying the aldose reductase gene aldR and then cloning the fragment into pET-28(a) using the restriction enzymes BamHI-HF and HindIII-HF with an N-terminal His 6 -tag.
Escherichia coli BL21 (DE3) containing the aldR gene was grown overnight at 37 °C on a rotary shaker at 250 rpm. The culture was then sub-cultured 1:100 into fresh LB medium containing kanamycin and grown at 37 °C with shaking at 250 rpm until the optical density at 600 nm reached 0.6-0.8. Aldose reductase expression was induced by adding isopropyl-β-d-1-thiogalactopyranoside to a final concentration of 0.5 mM. Cells were grown at 25 °C for additional 16 h at 200 rpm. Cell lysate was sonicated six times using 40% amplitude for 20 s on ice. AldR lysate was clarified by centrifugation at 13,000×g for 20 min and then passed through a 0.45 μm filter. AldR was purified by loading the lysate onto three 5 mL HiTrap Chelating HP columns charged with 0.1 M NiSO 4 and installed on an AKTA prime FPLC system (GE Healthcare). The cell-free extract was applied onto a column previously equilibrated with binding buffer (50 mM NaH 2 PO 4 , 300 mM NaCl, 10 mM imidazole, and pH 8.0). The unbound proteins were removed from the column with a washing buffer (50 mM NaH 2 PO 4 , 300 mM NaCl, 30 mM imidazole and pH 8.0). AldR was eluted from the column with an elution buffer (50 mM NaH 2 PO 4 , 300 mM NaCl, 250 mM imidazole, and pH 8.0). Enzyme fractions were analyzed by 10-12% SDS-PAGE (Bio-Rad) and visualized by staining with SimplyBlue SafeStain (Invitrogen). Protein concentrations were determined using Coomassie Plus (Bradford) assay kit (Pierce). Molecular weight of the protein was determined by SDS-PAGE analysis.
Aldose reductase activity was determined spectrophotometrically (Cary 100 Bio UV-Visible Spectrophotometer, Agilent) by monitoring the rate of NADP + (ε = 5.62 mM −1 cm −1 ) or NADPH (ε = 5.12 mM −1 cm −1 ) formation at 340 nm. The standard reaction mixture (1 mL) contained 20 mM Tris-HCl buffer (pH 7.0), 10 mM of substrate and an appropriate amount (100-1000 µg) of the enzyme. The reaction was started by adding NAPDPH or NADP + to the mixture. One unit of aldose reductase activity was defined as the amount of enzyme that catalyzes the formation of 1 µmol NADP + or NAPDPH per minute. The reaction mixture consisted of 1 mL 20 mM Tris-HCl buffer with pH 7.5, 10 mM NADPH, 10 mM galactose, and purified AldR enzyme. After reacting for overnight at 25 °C, the mixture of products was centrifuged at 12,000×g for 20 min and the supernatant was analyzed by HPLC.

Analysis of intracellular metabolites
For intracellular metabolite analysis, a fast filtration sampling method was used as previously described with a slight modification [56]. Briefly, 0.5 mL of culture grown until the exponential phase was collected and vacuum filtered using a vacuum manifold system (Vac-Man ® Laboratory Vacuum Manifold, Promega) assembled with a nylon membrane filter (0.45 µm pore size, 13 mm diameter, Whatman, Piscataway, NJ, USA) and a filter holder (Millipore). The filtered cell culture was then washed with 2.5 mL of distilled water at room temperature. The entire process for fast filtration was finished within 1 min. The filter membrane containing the washed cells was quickly mixed with 1 mL of a pre-chilled acetonitrile/water mixture (1:1, v/v) and 100 µL of glass beads. The extraction mixture was vortexed for 3 min to extract intracellular metabolites of R. toruloides IFO0880 by disruption of the cell membrane. The extraction mixture was then centrifuged at 16,000×g for 3 min at 4 °C. 0.8 mL of supernatant containing the intracellular metabolites was dried using a speed vacuum concentrator for 6 h.
Prior to GC/MS analysis, intracellular metabolites were derivatized by methoxyamination and trimethylsilylation. For methoxyamination, 10 µL of 40 mg/ mL methoxyamine chloride in pyridine was added to the dried intracellular metabolites and incubated for 90 min at 30 °C and 200 rpm. The intracellular metabolites were then trimethylsilylated by adding 45 µL of N-methyl-N-trimethylsilyltrifluoroacetamide for 30 min at 37 °C and 200 rpm. The derivatized metabolite samples were analyzed by GC/MS by an Agilent 7890A GC/5975C MSD system equipped with an RTX-5Sil MS capillary column (30 m × 0.25 mm, 0.25 µm film thickness; Restek) and an additional 10 m long integrated guard column. One microliter of the derivatized sample was injected into the GC in a splitless mode. The oven temperature of a GC was initially set at 150 °C for 1 min, after which the temperature was increased to 330 °C at 20 °C/min, where it was held for 5 min. The mass spectra were recorded in a scan range 85-500 m/z at 70 eV of electron impact, and the temperature of the ion source and transfer line was 230 °C and 280 °C, respectively.
The raw data obtained from GC/MS analysis were processed using an automated mass spectral deconvolution and identification system (AMDIS) software for peak detection and deconvolution of mass spectra [57]. The processed data were uploaded to SpectConnect (http:// spect conne ct.mit.edu) for peak alignment and generating the data matrix with the Golm Metabolome Database (GMD) mass spectral reference library [58,59]. The normalized abundance values for each metabolite were obtained by dividing the peak intensity with the dry cell weight. For statistical analysis, such as PCA and hierarchical cluster analysis representing as a heat map, the ClustVis Web tool was used [60].