Skip to main content
Fig. 6 | Biotechnology for Biofuels and Bioproducts

Fig. 6

From: Respiration-based investigation of adsorbent-bioprocess compatibility

Fig. 6

Cultivation of G. oxydans 621H ΔhsdR pBBR1-p264-fdhSCL-ST treated with different adsorbents according to Fig. 2 protocol step Bb, for investigation of nutrient adsorption. Depicted are A the oxygen transfer rate (OTR) and B the final optical density at 600 nm for one set of adsorbents suitable for 5-KF adsorption. Detailed information about the applied adsorbents is shown in Table 1. Cultivations were performed in a RAMOS device at 30 °C, 350 rpm, VL = 10 mL in 250 mL RAMOS shake flasks at a shaking diameter of 50 mm, initial pH value 6, 60 g/L fructose in Gluconobacter minimal medium. For clarity, only every fifth measuring point is marked as a symbol. Adsorbents, 50 mgadsorbent/mL, were added. For all curves, mean values of duplicates are shown

Back to article page